ITunes upgrade to 6.02 destroyed my Airport Express Airtunes network

upgraded to 6.02 last night, opened iTunes this AM--lower RH corner no longer shows option to use computer speakers or my networked home theater speakers. Airtunes worked flawlessly in 6.01.
is there any way to restore my airtunes network without downgrading to iTunes 6.01?
would upgrading the OS to 10.4.4 fix this?
not sure if this belongs in the iTunes for Mac thread or in the Airport Express thread--mods feel free to move
thanks

No answer from others but I seem to have fixed the problem by unplugging the Airport Express from the wall (i.e unpowering it), waiting 5 minutes,then plugging it back in. Light went yellow for less then a minute,then back to green, and after restarting my Mac and reopening iTunes the Airtunes button was back, and I can now choose the multiple speakers option and thus hear music through my home theater and on my iMac in the other room.

Similar Messages

I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices.

I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices. I assume that I have to reconfigure them to the the new wireless but how do I do this frmo my PC? Thanks

I would recommend that you start by performing a "factory default" reset on each of your AirPort Express base stations. Once completed, you can use the following Apple Support article to configure each base station for streaming.

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen

Regarding an Apple TV and an existing Airport Express/AirTunes setup

alright, i think i'm going to make the jump now for the new Apple TV. but i do have a few questions, particularly re: my existing Airport Express/AirTunes and wiring since i'm really maxed out in terms of open ports that i have left.
—my HDMI will have to go through a new HDMI smart switch hub into my older plasma that has one HDMI input. no problem, i've researched the smart switch, and realize the Apple TV may go in the low priority input since it seems to throw a continous current. if anyone LOVES their smart switch, throw me a bone here.
--however, i will need to go audio optical out into my receiver based on my current setup. and my receiver's optical inputs are all currently used. however, one is in use by a nearby Airport Express. since that AE has been used for AirTunes for years, i assume i can now safely ditch it's optical out since i will now be running my music through the Apple TV instead, correct? and therefore i will have my receiver's optical input now freed up, and there goes my Apple TV wire instead. just looking for verification here.
--since this AE is right there, will I get any speed advantage to the Apple TV by dropping an Ethernet cable from the AE's output into the Apple TV's Ethernet input, rather than relying on a pure wireless signal? my assumption is no, since they are both receiving the signal from my Airport Extreme on the other side of the house, but i thought it was still a worthwhile question.
--this particular AE has also been acting as a WiFi range extender (it's b,g,n). so i guess i will still just leave it plugged into the wall, but turn off it's AirTunes sharing, correct?
--(side note: if i wind up not needing the AE's optical out, and i don't need it's Ethernet out, i will then be moving it across the room since i'm ridiculously tapped out of electrical outlets by my entertainment center. and that's where the Apple TV power cord will go. just a boring fyi)
--i truly think i had another important question, but i cannot remember it. so i'll repost when it comes to me.
so i think i know my answers, but i always learn in these forums. so any thoughts or feedback is greatly appreciated.
thank you!

kevinopp wrote:
—my HDMI will have to go through a new HDMI smart switch hub into my older plasma that has one HDMI input. no problem, i've researched the smart switch, and realize the Apple TV may go in the low priority input since it seems to throw a continous current. if anyone LOVES their smart switch, throw me a bone here.
Older AppleTV did not play well with some switches, so it'd be sensible to get advice about one that definitely works with the new unit. They may have ironed out HDMI glitches but too early to tell.
--however, i will need to go audio optical out into my receiver based on my current setup. and my receiver's optical inputs are all currently used. however, one is in use by a nearby Airport Express. since that AE has been used for AirTunes for years, i assume i can now safely ditch it's optical out since i will now be running my music through the Apple TV instead, correct? and therefore i will have my receiver's optical input now freed up,
Yes, the AppleTV will replace the Airport for optical audio duties from your iTunes library. Add an iPhone/iPas Remote app and it should work very nicely as it did with the 1st gen.
--since this AE is right there, will I get any speed advantage to the Apple TV by dropping an Ethernet cable from the AE's output into the Apple TV's Ethernet input, rather than relying on a pure wireless signal? my assumption is no, since they are both receiving the signal from my Airport Extreme on the other side of the house, but i thought it was still a worthwhile question.
I doubt it would be of any benefit as AppleTV has wireless n anyway.
--this particular AE has also been acting as a WiFi range extender (it's b,g,n). so i guess i will still just leave it plugged into the wall, but turn off it's AirTunes sharing, correct?
In that case if it's an extender you may need it on for AppleTV to pick up the wireless, though I think I'd try and see if it receives the main signal adequately first.
--i truly think i had another important question, but i cannot remember it. so i'll repost when it comes to me.
I know that feeling.

HELP ibook g3 OSX 10.2.8 no longer detects airport express wireless network

my ibook G3 OSX 10.2.8, airport admin utility software 3.1.1 no longer can detect the airport express wireless network (powerbook G4, OSX 10.4.11, airport admin utility 4.2; airport express, WEP protected, to DSL modem). i just installed an ipod driver update on the ibook, and wireless networking went down on restart. any help greatly appreciated!

you name it : com.apple.airport.adminutility.plist
delete it and do as advised.
This isn't harmful, because it is only a preference list, so it will be created brandnew as soon as you re-setup the Airport stuff.
Mac OS X ( especially Jaguar ) has a tendency to corrupt some plists out of the blue, it is more or less harmless and can be fixed with recreating them plus permissions-repair.
Hint : repair permissions more than one time, it ALWAYS finds something to fix in Jaguar.
You cannot destroy something with these actions, because it is Unix maintance so usual routines.
A tool like cocktail or Onyx ( google them, onyx is freeware ) can help you run such ( and more ) routines on a scheduled base.
Always remember that OS X is no longer "the Mac OS", it is Unix with a nice Desktop, the critical things run hidden in the background, so it has to be treated like any Unix/Linux sort of OS, even if from the outside everything looks nice and kosher..
Best wishes from Germany

PCs suddenly no longer see Airport Express wireless network - please help!

Hi,
I am new to this forum and I need help. Two days ago - without me making any changes to settings etc. my Airport Express wireless network at home was no longer visible to any of my devices except to the Powerbook (G4 OS 10.3.9) which controls it. From one second to the next two Vista laptops and my cell phone (Nokia, Symbian OS).
My Powerbook has no problem connecting through AE to the internet. The two laptops are both able to connect to other wireless networks so they don't seem to be the problem. I just don't understand what caused this sudden drop-off/invisibility.
I have already tried the following: resetting the base station, changing the channel on the base station (from automatic) removing the network security altogether (from WPA2). But none of the devices except the powerbook can now see or detect my network.
Please - if anyone knows what the cause of this problem could be or how to fix I would be very grateful!!

you name it : com.apple.airport.adminutility.plist
delete it and do as advised.
This isn't harmful, because it is only a preference list, so it will be created brandnew as soon as you re-setup the Airport stuff.
Mac OS X ( especially Jaguar ) has a tendency to corrupt some plists out of the blue, it is more or less harmless and can be fixed with recreating them plus permissions-repair.
Hint : repair permissions more than one time, it ALWAYS finds something to fix in Jaguar.
You cannot destroy something with these actions, because it is Unix maintance so usual routines.
A tool like cocktail or Onyx ( google them, onyx is freeware ) can help you run such ( and more ) routines on a scheduled base.
Always remember that OS X is no longer "the Mac OS", it is Unix with a nice Desktop, the critical things run hidden in the background, so it has to be treated like any Unix/Linux sort of OS, even if from the outside everything looks nice and kosher..
Best wishes from Germany

Airport Express/AirTunes Not Working with New Verizon FIOS Connection

I was just set up with the new Verizon FIOS high speed internet, and now my Airport Express/AirTunes will not connect to my remote speakers like it did previously. The option for them is still there on iTunes, however when I select them, I get the horizontal barber pole for a minute, then the speaker selction goes back to computer.
In more detail:
Previously I had a Comcast internet connection which went through a Linksys wireless router. My Mini picked up the internet with this connection. Then I had an Airport Express hooked up to some remote speakers. They worked fine. Now, I have the Verizon wireless router hooked in directly to my Mini through the ethernet cable. I see the wireless network created by the Verizon router. I still see the wireless network created by the Linksys router. However, my iTunes can not connect to my AE/AirTunes speakers.
Note, I did reset the AE and then using Airport Setup Assistant, tried to locate it again, but it came up with nothing (other than my neighbor's new Verizon router).
Any help would be appreciated.
Thanks!

Still no luck. The green light is on for the AE.
Thanks in advance for the help.

Linking Dell Laptop to existing/working Airport Express wireless network

Hi,
I'm trying to connect a Dell Laptop (Inspiron 2500) running on Windows XP to an existing and functionning Airport Express wireless network set up for my girlfriend's iBook. It works perfectly for the iBook.
I have outfitted the Dell with a D-Link wireless G USB adapter and I see the network (i have the password) and it says I am connected to the network (even says connection is very good).
However, when I open the internet browser, nothing.
The network set up is: Cable to RCA Digital modem (model DCM425) to Airport Express (via ethernet) and to computer.
I have tried playing around with the Dell Laptop settings (IP, DSN, etc ...) and I have called everyone involved (including Apple) to no avail.
Any help would be greatly appreciated!
Thanks,
Nick
Dell Laptop Windows XP iBook

Thanks for the reply.
WEP is enabled. As far as the encryption, I'm not sure. I believe that it's 64-bit, as the password for the network is a five-letter word.
The funny thing, though, is that I had been using an IP address which I found on my girlfriend's Ibook, which allowed me to connect to her AEBS network, although the internet browser showed no connection.
Following directions from somebody else, I removed the IP address to enable DHCP, and then I was able to connect to other networks in the area (and the browser also connected to the internet) but I couldn't get onto her network anymore. Even with the password ...
Any ideas?
If i'm supposed to upgrade to 128-bit, how should I go about doing that?
Thanks again for the reply.
What encryption are you using?
Do you have WEP enabled?
The problem you are having probably lies with the
encryption key.
ccessing a Airport Network with a Windows XP PC or
laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or
laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
iFelix

Airport Express WiFi network MAC address filtering not working

I have an Airport Express WiFi network which I bought and installed new in 2011. Initially I enabled MAC address access control and populated a list. It was working perfectly, I know, because a niece visiting tried to connect her iPhone and could not until I added its MAC address to the allowed list. Now however, anyone can connect without being added to the list. I think I read somewhere that a recent firmware update permanently disabled MAC filtering in Airport Express, even when it was previously working? Can anyone enlighten me about what's going on here?

In a sense those are/were/should operate as two separate functions, which they did before recently.
They do operate as two separate functions.....but it all depends on how you have the default rule setup in Timed Access.
If the default rule in Timed Access is set to No Access.......then a wireless device cannot connect....even it has the password for the network.....unless it has been setup on the list of allowed devices in Timed Access.
I have checked this 3 times this evening to verify. It works as it always has, and as expected.
If the default rule in Timed Access is set to Unlimited, then any device can connect to the network if it has the password. Devices that are listed or specified in Timed Access will be allowed to connect at the specific times that have been set up for each device.
So, if you want to use the more traditional MAC Access Control settings, the default rule has to be set to No Access and then you must set up a rule for each device that you want to allow to connect to the network. Only devices on the Timed Access list will be allowed to connect to the network. Other devices will not be able to connect to the network....even if they have the correct password.
If a recent firmware update has changed things from what they have always been.....then I am not affected....and I should be if I am using the same firmware as others.

Regarding a 2nd gen. Apple TV and existing Airport Express/AirTunes setup

alright, i think i'm going to make the jump now for the new Apple TV. but i do have a few questions, particularly re: my existing Airport Express/AirTunes and wiring since i'm really maxed out in terms of open ports that i have left.
—my HDMI will have to go through a new HDMI smart switch hub into my older plasma that has one HDMI input. no problem, i've researched the smart switch, and realize the Apple TV may go in the low priority input since it seems to throw a continous current. if anyone LOVES their smart switch, throw me a bone here.
--however, i will need to go audio optical out into my receiver based on my current setup. and my receiver's optical inputs are all currently used. however, one is in use by a nearby Airport Express. since that AE has been used for AirTunes for years, i assume i can now safely ditch it's optical out since i will now be running my music through the Apple TV instead, correct? and therefore i will have my receiver's optical input now freed up, and there goes my Apple TV wire instead. just looking for verification here.
--since this AE is right there, will I get any speed advantage to the Apple TV by dropping an Ethernet cable from the AE's output into the Apple TV's Ethernet input, rather than relying on a pure wireless signal? my assumption is no, since they are both receiving the signal from my Airport Extreme on the other side of the house, but i thought it was still a worthwhile question.
--this particular AE has also been acting as a WiFi range extender (it's b,g,n). so i guess i will still just leave it plugged into the wall, but turn off it's AirTunes sharing, correct?
--(side note: if i wind up not needing the AE's optical out, and i don't need it's Ethernet out, i will then be moving it across the room since i'm ridiculously tapped out of electrical outlets by my entertainment center. and that's where the Apple TV power cord will go. just a boring fyi)
--i truly think i had another important question, but i cannot remember it. so i'll repost when it comes to me.
so i think i know my answers, but i always learn in these forums. so any thoughts or feedback is greatly appreciated.
thank you!

I received my apple tv yesterday (wednesday the 29th). I bought a new computer on september 2 and also ordered the ATV and i got next day air. I think that why i got mine so quick. the tracking said i wouldnt get it until october first. But besides that the new apple TV is so awesome. i quickly viewed all my pictures and movies from my mac, used my netflix account, you tube, and a few other features. i also got my iphone to work as the remote which is way better than the standard remote. my only problem is i want to pair my wireless keyboard and cant find out how to do it...

Using Airport Express / Airtunes to play audio from Safari / OSX?

Just bought my first Airport Express. Can I use Airport Express / Airtunes to play out audio from Safari / OSX (or other applications) to my home stereo?

Hi Fenneberg:
Welcome to Apple Discussions and congrats on your AE purchase!
You'll need a 3rd application to stream music to your AE from other applications like Safari. It's called Airfoil and it can be found at: http://www.rogueamoeba.com/airfoil/
I hope this helps!

Iphone will not connect to airport express extended network - macbook and ipad will - Help

Iphone will not connect to airport express extended network - macbook and ipad will without problems.
iphone will connect to base station no problems, I've restored settings and started again but still the same, the iphone picked up the network for the last couple of months, but not now ?

I'm having the same issue. My AExpress used to give a good signal strength on the far side of the house extending he network created by my Extreme. However, I've noticed lately that my iPhone does not receive the same strong signal it once did. AE has a green light, I've rebooted it, and my Extreme but there is no change in signal strength. Other than the green light, how can I tell if the Express is working if I don't get a good network signal?

I use Airport Express to network 3 iMacs to a DSL modem. Recently, the network became undiscoverable to one of the iMacs. Suggestions for a fix?

I use Airport Express to network 3 iMacs to a DSL modem. The network has become undiscoverable to one of the computers. I have reset the base station to factory settings but this does not help. The other two computers are unaffected. All 3 computers can access the internet when connected directly to the modem. I suspect the problem might be the Airport card? Suggestions?
beaucleo

Thx for the suggestion, although I didn't have to reset the SMC to fix the problem. The problem was the handshake between the security password and the designated network. The following links gave me info for investigationg the problem.
http://support.apple.com/kb/HT4199
http://www.ehow.com/how_6831952_test-airport-card.html
http://www.youtube.com/watch?v=aXiZn64aZfg
http://www.cnet.com/news/how-to-invoke-and-interpret-the-apple-hardware-tests/
I would recommend these web sites to anyone who is having problems setting up and/or maintaining a wifi system.
I discovered after reading one of the web references that if I disabled nework security the problem went away. This, however, was unacceptable. Further experimentation showed that the solution to my problem was to change the name of my network while keeping the same password. I tried only changing my password but that didn't help. I still don't understand why only 1 of the 3 networked iMacs was affected.
Again, thx for your interest and reply.
beaucleo

HOWTO: Linux Audio Players and the Airport Express (Airtunes)

Hi,
I've written a description on how I got amaroK (Linux audio player) to stream audio to my Apple Airport Express (Airtunes):
http://www.jroller.com/page/nwinkler?entry=amarokand_the_airportexpress
Nils
Other OS Fedora Core Linux

Here is a link comparing all of the Express versions - http://en.wikipedia.org/wiki/AirPort_Express
Here is an article on Airtunes vs Airplay - http://answers.oreilly.com/topic/2169-apples-airplay-what-it-is-and-how-its-diff erent-from-airtunes/

Windows 7 Upgrade - iTunes no longer see's my remote Airport Expresses

Before upgrading from Vista to Windows 7, I deinstalled iTunes. After upgrading, I reinstalled the latest iTunes from Apple. iTunes appeared to be working fine until I played the 1st song. It could not find/connect the 2 remote Airport Express units. Interestingly, the icon at bottom right of iTunes initially showed the multiple choices but now it does not show anything. Also, the computer shows my APPLE network as strong and working just fine. The APPLE network is one of the Airport Express units. So, I am connected to the network OK . . . it is just iTunes that can no longer see the multiple locations to stream music. Am using an HP laptop, really strong and just purchased last year. Prior to upgrading Windows 7, everything had been working perfectly. H E L P

I suspect that the problem may be the Windows 7 firewall settings are preventing AirTunes from negotiating a connection to either AirPort Express Base Station (AX).
To check your Windows 7 firewall setting: Control Panel > Systems and Security > Windows Firewall. Select Turn Windows Firewall on or off. For troubleshooting, temporarily disable the Windows Firewall.
Your PC should now be able to stream to the AX. Please post back your results.

ITunes upgrade to 6.02 destroyed my Airport Express Airtunes network

Similar Messages

Maybe you are looking for