ITunes upgrade (v6 - 7.6) on 10.4.2 not working.
Hmmmm... so I"m going from the default iTunes (v.6) on OS 10.4.2 and trying to upgrade to the downloaded version of iTunes 7.6(.1) and though the documentation says minimum system requirements of 10.3.9, here I am running a newer operation system, but getting an error message from the installer that I need to run 10.4.9 or later. This seems to be ridiculous. To make matters worse, I can't seem to find other locales to download iTunes 7.2, etc.
Any help would be appreciated.
The current version of iTunes has only been qualified on Mac OS X 10.39 and Mac OS X 10.49 and newer. Apple often only tests new software on the current version of Mac OS X and the last version of the previous revision.
(31171)
Similar Messages
-
Recently, iTunes upgraded. My 7th generation iPod is now not recognized and I cannot sync. The troubleshooting talks about being visible in Windows (iPod is invisible) No other options and nothing about windows 8
I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.
-
ITunes upgrade restarted my computer when I told it not to !?!?!
iTunes upgrade restarted my computer when I told it not to !?
I've just lost my work in progress when I told iTunes to upgrade (what a mistake!) to version 10.2.0.34, then at the end it asks me if I want to reboot, to which I said NO, and then it rebooted anyways (!?!!?!) and didn't ask me to save and close my data, so I lost all my work in progress(!?!?!?!?!!?!?!!?!?!?!???)
AAAARRRRRRRG ! PLEASE FIX THIS !!Hi Why do you need to use a PC since iOS 7 you can download updates Apps everything Over wifi I have iPhone 5 s & 2 ipads in over a year I have never connected them to My Apple pc Try a wifi update If you have problems Try a Reboot press & hold power button & menu button hold both Down until You see Apple Logo you will not last any data. Cheers Brian
-
I need to restore back to 1.0 on my Nano as iTunes upgraded automatically to 1.2 and it's not compatible with my car device. Where can i download the ispw and ispw.signature files for 1.0 ?
I don't think it's possible if you are stuck in recovery mode but I may be wrong...
Since your device qualifies for iOS 8(.1), that is the version that will be downloaded/restored to the iPad.
I do know that you can restore your iPad (from backup & as new) and keep the same iOS version if you restore using the iPad itself under Settings/Reset/Erase All Content and Settings but since you can't access this because your stuck in recovery mode, the point is moot.
Have you tried downloading the update in the middle of the night (2 am or so) where dropouts are much less likely to occur?
It's always possible to take your device in to an Apple Store (make a Genius Bar reservation first) and do the iOS update there in the Apple Store.. I'm sure they will gladly help you out with it and not charge you a thing. The trouble with that would be if you don't have an Apple Store nearby.
Sorry I couldn't be of any more help. -
My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out
Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh. -
since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up, while the airplay works fine with my iPad and iPhone. Anyone has experienced the same? any fix available?
Hi Erdelestre,
Thanks for visiting Apple Support Communities!
See this article for some tips about troubleshooting AirPlay:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Troubleshooting performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Best,
Jeremy -
After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output. I am trying to save the scan as a PDF in Documents.
Have you installed Apple's latest Epson drivers?
They are here:
http://support.apple.com/kb/DL1398 -
i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you
Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]] -
How can I get my iPhone to show up on the panel to the right iTunes? I keep connecting it but it does not work.
http://support.apple.com/kb/TS1538
-
Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.
Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.
-
Since upgrading to OS X yosemite my printer will not work.
Since upgrading to OS X Yosemite my printer will not work.
I found the solution in another thread. Thanks to frankglyn who posted it there.
I've just copied it here, as this seems to be the most active thread on this subject.
The solution (steps A to C) worked fine for me and others and should work for you as well, until Kodak will come with an updated driver. Then, you can revert the changes as also described below (steps 1 to 7)
A) in Spotlight Type Terminal and then press enter.
This should bring up the terminal window/program.
B) In the Terminal type sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
It will ask for your password.
C) After that type following: sudo launchctl stop org.cups.cupsd
After that if you are lucky the printer driver should start to work. (which it did in my case)
I hope this works out for you, if not then you can do following to revert the changes:
In case you want/have to revert the changes:
1) Open the terminal as usual (Spotlight type Terminal hit enter and wait for the terminal window to appear)
2) then type: cd /etc/cups
3) then type: sudo nano cups-files.conf
4) 'type in your password'
This brings up a command line editor which you can use to edit the file
5) Remove the last line which says Sandboxing Relaxed
6) press 'ctrl x'
And then confirm with y when being asked if you want to save the changes
7) after that type sudo launchctl start org.cups.cupsd -
Since upgrading iPhone 4S to new OS it has not worked. Now over 10 days with no phone, talked to Apple Care in Colorado and Australia over 10 hrs on phone 7 consultants. All that has to happen is for someone at Apple Care to reset a password? Phone and Apple ID don't recognise each other. This is nuts!
The phone will not recognise Apple if passwords or secret questions
-
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
I upgraded IPad to IOS7.0.4 and Itunes to 11.1.3.8, now sync will not work
I upgraded all 5 of our IPad Minis to IOS 7.0.4 and the Ituens to 11.1.3.8 and now I am unable to sync any movies, TV Shows, or Music to any of the devices. Itunes says its updated and that they are synced, but when I try to go to them on the pad, there is only the ICloud version available for those I have purchased through ITunes.
I am not even able to "Share" My Itunes Library through the WiFi in the house. The only thing that is working is my AppleTV.
I have tried rebooting PC. I have rebooted IPad's. I have restarted ITunes. I have verified access and restrictions. Nothing works.
The only thing that I have not tried is resetting the Pads. But I will say if I have to reset 5 IPads, 2 IPhones, 3 IPods and 2 AppleTV's every time an update is issued, I can tell you, I will seriously consider moving to another platform. I moved to apple for the theory of simplicity, they are almost as bad as Microsoft at this point.
Does anyone have any ideas?Finally, here is what I will have to do with 4 more IPad's, 3 IPods and I am not even updating the phones.
I had to connect the Pad to ITunes and let it do its thing. Because of whatever the error is, it take upto 20 minutes for it to finally get all the steps completed. I then have to go into the Summary section and tell it under the IPad Mini Section (NOT the BACKUP section) and tell it to do a Restore. I then have to wait for it to take over 30 minutes for it to kill the current setup and reboot. Once it finally reboots I have to go into setup and tell it to setup as an already known Pad configuration. This helps, but then I have to wait another 20 minutes till however long for it to install the media that it shows as part of the install. The reason I say however long is because if I only had about 5 Gig of media on there at the time. If I had it anywhere near full it would take much longer.
Then, at that point I can finally make changes to the media.
I also verified something else. The only other thing that they all had in common was they were all trying to download a movie I recently purchased. It was fairly large so I wondered if size was an issue or if maybe it was corrupted. I deleted it from ITunes and the CPU. Still had the problem.
This is the third update from apple I have had to do this. It is getting very old. I left the MS platform for the same reason. I dont have the time to spend fixing crap that Apple "Genious'" get paid to supposedly fix.
I appreciate the sugestion on the Hard Boot Process. I will try that sooner next time, but I am a bit frustrated with Apple at this point. Its no wonder they are loosing market shares.
Maybe you are looking for
-
Storing and retriving Date in Access Databae
hi, i,ve applocation with Access as database. i am not able to store Date in the database. i am using GregoianCalender to get system date but how could i store that date to the Access Database
-
Syncing mail between iMac G5 and Macbook Pro
I work at home on a G5 and regularly read and then delete or file my emails. I regularly sync between my G5 and Macbook Pro, which I use when traveling. My syncing routine works fine with the address book, calendar, etc., but when I go my Macbook Pro
-
Hello @ all, I want store news in an other repository than documents/news. So long that is not the problem. The problem is when I open the news I just see a xml file. The aim is that I want to see the news in that way they a presented when you open t
-
There is a black bar just above the tabs. Please help me what is it and how can I remove it..
Hi Every One, I Updated my Mozilla-Firefox to ver. 3.6, and after that I see a black bar above the tabs , and below the other toolbars. Please help me how can I remove it, and what is it! Thanks...
-
WRT400n range less than WRT54gs
Hi, I just replaced my WRT54GS router with a WRT400N router because it was supposed to be greater range and faster. I have 3 laptops. One is an HP vista with wireless G capability , another is an HP vista with wireless N capability, and the last is