Itunes Using too much power

So recently when i have itunes open, even when reduced to the background it will every so often spike my cpu to 100% and make it impossible to do anything else for a few second before settling back to normal. What would cause itunes to use so much power

Seems like there is a thread already sorry.....

Similar Messages

  • Why does my Macbook pro said "unplug the device using too much power to re-enable USB devices" when i plug in my iphone's charger to connect my phone with the mac?

    my iphone 5's charger is not working anymore with the mac or the normal plug in neither, i dont know why. whenever i plug in my mac, i have to twist the charger a little and my mac said "USB Devices Disabled: Unplug the device using too much power to re-enable USB devices". of course it cant connect with the itunes in my mac, but somehow it still syncs the music to my iphone... i don't understand why. please help me thanks!

    try resetting the ipad,or change the cable ,it woould work 

  • HT4101 Has anyone found a way to download pictures from Samsung Gala               xy 3 phone to Ipad air?  I bought the lightning adapter but keeps giving me the message uses too much power.

    Has anyone found a way to download pictures fro Samsung Galaxy 3 phone to the Ipad air? I bought the lightning adapter but I keep getting the message device uses too much power.  Any ideas?

    You can't directly from a Galaxy phone.  But you can certainly upload the pictures from your Galaxy phone to your computer and then sync them to your iPad via iTunes.

  • When i plug my brand new iPod into my macbook it won't sync and says usb disabled because its using too much power, worked fine when i first synced it yesterday

    when i plug my brand new iPod into my macbook it won't sync with iTunes and says usb disabled because its using too much power. it worked fine all this week when i first got it

    Might want to have your MacBook looked at.

  • To upload photos from my pc onto my ipad using a usb stick. I bought a camera connector kit and tried placing the usb stick onto one of the white square adaptors, stuck it into the ipad2 and I got 'the device uses too much power'' message. Pls help.

    I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
    Thank you for any help/ solution you can offer.
    Regards

    I'd ask that on the iPad forum.
    https://discussions.apple.com/community/ipad

  • On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

    On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
    "USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
    I unplugged the device and the message still keeps coming up.
    This is what I have done so far to troubleshoot:
    I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
    The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

    I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
    1. Reinstalled OSX
    2. Restore the last known good Time Machine Backup.
    This did not fix my issue, so I called Apple Support and they told me this:
    1. Turn Power off.
    2. Wait 15 seconds.
    3. Plug in Magsafe adapter.
    4. Wait 15 seconds.
    5. Hold down the Shift+Option+Power Button for 20-30 seconds.
    6. Turn Power back on.
    Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
    and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

  • Lacie "using too much power", USB disabled, can't access ext HD?

    Last night, moving items to my Ext HD, i got an error message about the USB "using too much power" and then it disabled it.
    I'm using a 15'' 2006 Macbook with 10.6.7 operating system.
    I've googled the issue and have run out of ideas.
    The Ext HD is a 500GB LaCie Little Disk New Pack USB2.0 Black
    Restarted the macbook.
    Booted the macbook into safe mode.
    I've tried plugging something else into both my USB ports (it detected the item, a camera card reader) and was usable.
    When I plug in my Lacie Ext HD now using its usb cord, the blue light on the Lacie flashes as if its detectable/inuse but there's nothing in my Mac menus showing access to it.
    HELP ?
    Error Message:
    Because a USB device was drawing too much power from your computer, one or more of your usb devices have been disabled.
    To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again.

    Maybe the disk will work through a separately powered USB Hub?
    Bob

  • I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

    I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

    I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
    Cheers
    Guy

  • I can no longer download photos to my ipad with the camera attachment. the message says thats its using too much power. i have a 100% charge and i used it before and it worked fine.

    I can no longer upload photos with the camera attachment. I am getting an error saying the device uses too much power. I have used the device before. Is there anything that can be done to fix this problem?

    You don't actually say what the problem is, but maybe this can help:
    USB and Firewire information:
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    http://support.apple.com/kb/HT4049?viewlocale=en_US

  • HT4101 When connecting my camera to my IPad mini via lightniing to usb camera adapter,I get "The attached accessory uses too much power" .Any solutions?

    When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions

    It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
    Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

  • I made an extra backup on a USB device and now I can't get it back because "the device uses too much power". Why didn't it a few weeks ago and how can I use the device anyway?

    because "it uses too much power"
    I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
    Question 1: How do I solve the problem? (Without going back to Snow Leopard)
    Q2: Why this parential supervision by Apple?

    riks1105 wrote:
    because "it uses too much power"
    I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
    Question 1: How do I solve the problem? (Without going back to Snow Leopard)
    Q2: Why this parential supervision by Apple?
    Get a powered hub
    USB is cranky, you're not the first (probably not the last) to have this happen.

  • Cannot charge iPhone 5 because USB is "using too much power"

    Last night I tried charging my iPhone 5 on my MacBook Pro and everything went fine. However, when I tried to do the same thing today, every time I would plug my device in I would get an error message saying that the USB device is using too much power and has been disabled. Is there anyway to override this so that I can charge my phone?

    It'll still carry the Apple warranty. My suggestion would be to bring your Macbook along and show them, even if you go to Verizon. You're better off at the Apple store anyway. If it turns out the cable isn't the problem, the diagnosis is free at the Genius Bar and one way or the other your problem should be fixed. Just make an appointment first.

  • Camera connection kit w/USB says cannot work uses too much power

    When using the camera connection kit /USB the message cannot use device it uses too much power pops up!

    What are trying to use it with ? If you are connecting it to your camera then does your camera have a setting on it to enable PTP (Picture Transfer Protocol, Pictbridge) or Mass Storage Device ? If you are trying to use a third-party card reader or a flash-drive with the kit to copy photos/videos over to the iPad, then a lot of them require more power than is supplied to the iPad's port - if you have a powered card reader or a single-card reader (i.e. not one that has different slots for different types of memory card) then that might have a better chance of working

  • Camera Connection Kit - Accessory uses too much power

    I am trying to import photos from my Kodak EasyShare M873 via the USB connector from the CCK. About a quarter of the way through the import, the iPad disconnects and states, "The attached accessory is using too much power". Is anyone else getting this. I suppose I could just remove the SD card from the camera everytime I want to import. But then what is the point of having the USB adaptor if the iPad can't handle connecting to a semi-low quality consumer camera?

    The USB cable is great if the battery is full and you don't have a ton of photos, or if the camera either has photos in its "built-in" memory or doesn't use SD.
    PERSONALLY I'm glad they included both, but plan to use only the SD adapter on trips.
    Doug
    PS: It might be interesting, though probably camera-specific, to compare transfers times both ways...

  • HT4101 When I connect using the USB version I get a message on the ipad saying "the attached accessory uses too much power. What can I do?

    Ipad2 Camera Connection Kit
    When I connect using the USB option I get a screen on the ipad which says "Accessory Unavailable. The attached accessory uses too much power"
    What should I do please?
    David

    I believe your camera uses a micro SD card. The CCK accepts the full size SD card. Do you have a SD card adapter to plug the micro into?
     Cheers, Tom

Maybe you are looking for

  • Insert an image from a Database

    Hi - I am trying to insert an image from a database into a webpage.  Basically when clients register on the site they upload their logo which i want to come up when they look at their account details and when they post a job.  When I test the file up

  • SQL Loader XML Missing Data

    I am trying to load a XML file via SQL Loader. My loader file is as follows: LOAD DATA INFILE 'C:\Infile.xml' "str'</Record>'" BADFILE 'C:\Infile.bad' Replace INTO TABLE Cust_Table TRAILING NULLCOLS dummy filler terminated by ">", Month enclosed by "

  • Need color printing on 11 x 17 paper

    What are my options? the user needs to print on 11 x 17 inch paper, which narrows down the solutions... I found an OJ Pro K8600 ($500) and an InkJet 2900 dtn ($1K). This is for a network environment. I'd rather a laserjet solution, but the cost is so

  • Add depth to the contents of a 2D image (in the 3D editor)?

    Hello all! I've been playing around quite a bit with the 3D-editor, to make 3D objects appear in a 2D image (like using a photo of a street as a backdrop for a 3D object). I tried the postcard-function, but of course that will only give me a complete

  • Footer moves in different browsers

    I'm having a problem with my footer wrapper moving to the right of the content. It's happening on the site I'm working on now http://www.jesseyoung.com/jesse_new/services.html), but has also happned on a number of other sites in the past. Sometimes I