ITunes v7.7.1.11 for Windows hosed my Library!!!! - FIXED

I just installed the latest version of iTunes (v7.7.1.11), and after doing the requested restart (unusual for iTunes upgrades), iTunes started and gave an error saying that my iTunes Library database was corrupted and that it had renamed it as 'iTunes Library (Damaged).itl', after that iTunes opened but all my music was missing!! Ouch!
On looking in Explorer I saw that the files were still all in their correct place on the HDD of my system, so I then immediately made a copy of those files (all 18Gb) to an external HDD. I then went and restored the 'iTunes Library.itl' & iTunes Music Library.xml' files from a 2 day old backup, overwriting the files that iTunes had automatically created when it started on the first start after the upgrade. And hay-presto, everything was back to normal All the music was in place and playable!
A second error message did start to appear during this process, saying that the Registry settings for burning music to CD's were missing, so please re-install iTunes. I did do this before restoring the above files, using the 'Repair' option that was presented to me. After that I rebooted, restored the two files mentioned above and everything is working fine again.
So my advice to anyone thinking about upgrading to version 7.7.1.11 of iTunes is to make a copy of the following two files;
1). iTunes Library.itl
2). iTunes Music Library.xml
These files reside in the 'iTunes' Folder in your 'My Music' folder.
I hope this helps!
Jonathan.

I would strongly recommend that anyone makes a back up of the two files mentioned above before every upgrade of iTunes. Doing so will I'm sure save a lot of heartache!
JRP

Similar Messages

  • ITunes 11.1.4.62 for Windows Breaks iTunes Match

    After upgrading to iTunes 11.1.4.62 for Windows 7 Ultimate 64-bit, my iTunes Match no longer works.  It insists that I pay for another subscription even though I have a valid subscription already.  This issue has been going on for over a week with no response from Apple Support.  Is anyone else experiencing a similar issue?  What can I do to remedy this problem?

    I use a utility called ByeTunes that removed Itunes completely of my pc "It's free"       and got a good down load of Itunes.a few weeks after they correct the upgrade.LOL

  • Error - iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3 ???

    In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3.
    I've tried changing permissions and sharing - nothing seems to work. mat be a Windows 8 issue???

    You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter.  That's also done in Get Info for the file or folder concerned.
    Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

  • TS5376 iTunes update 11.1.4 for Windows: Unable to install or open. if 11.1.4 is uninstalled, will my library contents be lost?

    iTunes update 11.1.4 for Windows: Unable to install or open. if 11.1.4 is uninstalled, will my library contents be lost?

    You don't need to open iTunes to back up the library. See Troubleshooting issues with iTunes for Windows updates and look in the further information area for backup advice.
    tt2

  • How To convert mp4 to mp3 using itunes 11.1.3.8 for windows

    How To convert mp4 to mp3 using itunes 11.1.3.8 for windows

    pgyan wrote:
    How To convert mp4 to mp3 using itunes 11.1.3.8 for windows
    The normal situation would be wanting to convert .m4a (AAC or Apple Lossless) to .mp3 as these are both music file formats. The extension .mp4 is normally for a video file and iTunes itself will only convert music files from one format to another.
    For details on how to convert between music formats see http://support.apple.com/kb/ht1550
    If you want to convert the audio track of an .mp4 video to a .mp3 file then you are going to need to use a different utility.

  • I cant play any movie on my itunes 10.5.2.11 for windows

    i cant play any movie on my itunes 10.5.2.11 for windows even the .mov files ?? i cant also drag any videos to the liberary .. just music ..whats wrong??

    The supported formats are listed on Apple's iPad webpage -> http://www.apple.com/ipad/specs/
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    So, it would have to be in one of those formats. It can be a little confusing because the extension doesn't always tell you the codec that the video inside that file needs. You'll probably have to transcode the video with some other application or recreate it yourself.

  • I have recently downloaded itunes 10.3.1.55 for windows xp but it does not seem to open

    I have recently downloaded itunes 10.3.5.1 for windows xp but its does not seem to open

    Have you tried delting the download and downloading it again?
    What happens when you "run" the download?

  • No AirPlay button in iTunes 11.1.3.8 for Windows 7 64-bit

    Hi guys,
      I cannot figure this out - I tried everything I could think of...
      I have my main iTunes library available for Home Sharing - now iTunes for Windows does not appear on AppleTV, iPad or iPhone in Remote or Music or Video at all. Moreover, its own Airplay button has disappeared.
      I tried the following:
      1) Disabling Windows Firewall - didn't help
       2) Uninstalling iTunes, Bonjour, Apple Mobile Device Support, Apple Application Support - didn't help
       3) Rebooting router altogether - didn't help
       4) Signing out of Home Sharing, disabling sharing library and enabling all back - didn't help
      I know that the problem is not with iOS or ATV - I can use Remote from iPad or iPhone to control ATV. However, iTunes for Windows simply does not appear in Remote application or anywhere else. It also does not have a button to Airplay to another device.
      The router configuration didn't change and rebooting didn't help. All devices are on the same network - iTunes and ATV on wired, iPad & iPhone on wireless.
      It used to work until the whole iOS 7 and related iTunes updates. Has anyone seen such a problem? Any ideas? Please?..
    Maksym

    Hi guys! I have just found a solution in a different thread - huge thanks to Toploader21120:
    1) open control panel.
    2)Choose Network and internet
    3)Select the VIEW NETWORK STATUS TASKS under NETWORK and SHARING CENTER section
    4) Choose the active network connection. It is usually name " wireless Network Connection 1" or something similiar.
    5) Click the properties button
    6) If the Internet PROTOCOL VERSION 6(TCP/IPv6) is checked, uncheck it, then click OK.
    7) Click CLOSE
    8) Restart iTunes and try to use the Home Sharing feature again.
    Apple dudes, please, do include it in FAQ!

  • Itunes 11.0.2 installer for Windows 7 (64 bit) freezes?

    I'm having a problem installing iTunes 11.0.2.26 on Windows 7 64-bit. I have tried both the automatic updater and a full uninstall/reinstall with a standalone instalation. It seems to get stuck around the same point. If I try the automatic updater first Safari installs then iTunes starts to install. The iTunes installation gets to around 90% then the installation stalls. There is no error message and the installer just says "Installing..." but the CPU usage drops to 0% on both cores. I have left the installer sitting like this for hours without it finishing. I have not heard anyone else complain about long installation times or stalling. A very similar problem happens if I try to uninstall and then do a standalone installation. The installer gets near the 90% point on the bar and then the process just stops and hangs. If I try to cancel the installation at this point, the installer will stop responding and then I have to end the process. Any help on this frustrating issue would be appreciated!

    You can try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). You may get a more useful error message as to which component has problems.
    tt2

  • TS5376 Trying to update iTunes to 11.1.4 for Windows has still failed after following detailed directions

    I followed the directions provided by Apple personnel to help resolve this issue: http://support.apple.com/kb/TS5376.
    The resulting errors include;
    Runtime Error! Program C:\Program Files (x86)\iTunes\iTunes.exe
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the applciations's support team for more informaiton.
    That was followed by: the iTunes warning:
    Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start. Verify that you have sufficient privileges to start system services.
    That was followed by  the Runtime Error message two more times.
    Followed by iTunes was not installed correcdtly. Please reinstall iTunes. Error 7 (Windows error 1114).
    NOTE: before this load attempt I
    Made sure I had Administrator rights
    Fully removed iTunes
    Manually removed any lingering iTunes files as per the instructions
    Right mouse clicked on the downloaded exe to make sure I was Administrator.
    Nothing seems to work. It was FINE until this new "upgrade". Any suggestions

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I can not download itune store 12.0.1 FOR windows 32-bit

    Is there anyone has the Download link? THANKS!

    Go to  https://www.apple.com/itunes/download/ or see the Further Information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
    tt2

  • When will Apple fix iTunes patch 11.1.4 for Windows?

    More a post for any Apple admin who see this: Clearly your latest iTunes update has problems. How soon can we expect this problem to be fixed?

    You don't need to open iTunes to back up the library. See Troubleshooting issues with iTunes for Windows updates and look in the further information area for backup advice.
    tt2

  • This itunes update is killing me. (for windows vista)

    I have tried everything and it is still not installing properly.  When I tried to delete the apple folder from my c drive it says I don't have permission.  This is not fun.
    There has to be a simple way to do this.  Before this update itunes was working perfectly.

    R6034 Runtine error now.  I have tried deleting the files as one thread suggested and nothing seems to work.
    Many thanks. Doublechecking: have you also worked through the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • Is iTunes 10.5 beta available for windows 32 bit and where is it found?

    New to the developers site. Can someone tell me if iTunes 10.5  beta is available for Windows (32 Bit) and where it can be found for download? Thanks.

    You're out in the public forums here, bryan. Best not to ask questions like that here ... it's a breach of your NDA. Try the developer forums instead?
    http://developer.apple.com/devforums/

  • What happened to Podcasts in Itunes 10.4.0.80 for Windows?

    I just installed Itunes for Windows on Windows 7, it is version 10.4.0.80, on a new computer. I went through the proceudre of subscribing to a podcast by going into Advanced >> Subscribe to Podcast. I expected to be able to see my subsribed podcast appear when I click on the Podcasts header in the navigation tree on the left. This is when I noticed that there is no Podcasts header. In the new version under "Library" I have "Music", "Films", "TV Programmes" and "Radio". I can't remember what version I was using before but I am pretty sure there used to be Podcasts here too. It doesn't appear anywhere on the list. Clearly the podcast section has just been moved somewhere, but where? I have repeated the action of subscribing several times and that seems to work with no errors, so it is definititely not a case of there just not being anything subscribed to. I only use Itunes to listen to podcasts, so this is rather crucial for me! Thanks in advance to anyone who can shed some light on this mystery.

    I found this happeneing too since upgrading from 10.3.x to 10.4 and can't beleive its still there in 10.5.
    Mine gets to between 1.2 and 1.6Gb before I get the 'Can't save library' error popup. If it happens late at night then the next day iTunes may be completely unresponsive - can't even bring it in to focus, so have to kill the process in Task Manager.
    This iTunes instance has been running for 15min short of one day of continuous playback! and based on it's current memory leakage, it's about to fail.
    For what it's worth, you can downgrade to 10.3 (you should be able to find sites archiving previous versions - Apple used to provide a link on their iTunes page, but I can't find it now). I was running or over a week with no decernable memory leakage, but as I wanted to upgrade to iOS5 on my phone, I had to go to 10.5.  I've got a MacBook Pro too, so may use that for iPhone updating and see if iOS5 will still sync music on 10.3 ...via direct USB connect of course!
    But, you'll also have to find the various guides for downgrading.
    Loosly put, you have to locate the backed up .itl files in your profile. It will have a date stamp in the filename to indicate when the upgrades took place.
    i.e iTunes Library 2010-11-22.itl
    It's a bit of trial and error unless you know how many upgrades you've done since 10.3!
    On Vista/Server 2008, the path to the backups is
    Users\<your user ID>\Music\iTunes\Previous iTunes Libraries
    Make a copy of your current .itl (in the parent iTunes folder) and copy and rename one from the backups. You'll need to rename the file back to the same as the current one (iTunes Library.itl)
    Hope this helps and hope that Apple pull the finger out of their cloud!

Maybe you are looking for

  • How to Make Wage Types Available in Drop Down

    Hi, I need to make a particular wage type available for a particular Infotype(14,15 to be precise.). I tried entering using the v_t512z maintenance. In that when I entered (actually copied from an existing WT), it gave an error that key already exist

  • Layer Mask Thumbnail Option

    I'm using PSE 11 and layers masks.  If you click on the layer mask thumbnail you have the option of "add mask to selection" and "intersect mask to selection".  They both select the same area of the photo. So I use the help menu and go online and type

  • Reg. different system

    Hi I heard that there are 3 systems. Production, Testing and Implementation. Who will be working on what system. How do we know that we are working on which system. Is everything done on Testing system first. Please explain. And also how to transfer

  • Filter for Safari

    I teach web design at the high school level and I'm have a little trouble keeping a small group of students focused on their work when myspace, e-mail and youtube are just a click away. I'm looking for a mac application that will allow my students to

  • Study material for MM

    Hi experts Can anyone please provide study material for learning material management module, which could guide me step by step working in MM module so that i could learn the step by step working of module.. Thanks