ITunes Version 10 runs slow; response to mouise commands lag
ITunes version 10 has never run smoothly on my computer. There is a annoying lag between the time you initiate a mouse command and a response from the program. I tried to uninstall and reinstall a while back, but that did not fix the problem. Never had this problem with earlier ITune versions. Does anyone know what is causing the problem and how to fix it?
Hello,
I just bought a new 27'mac w/ 4gb of ram and a Tb of memory. while i use it (with no other progams on) my itunes is slow. meaning that when i scroll or hit play it will be slow to respond. Even when i go to edit my tags sometimes. Now the problem is not constant, but it is annoying enough for me to post about it. Have you solved this issue? Now i will say that i have well over 200gbs of music on my computer (im a dj). Any help would be great.
Similar Messages
-
Slow response from SAR command
Hi,
I see slow response from SAR command on M5000 series server.
SunOS prod452 5.10 Generic_144488-09 sun4u 01/03/2012
sar 1 100
14:25:43 %usr %sys %wio %idle
14:25:45 1 1 0 98
14:25:46 1 0 0 99
14:25:48 1 1 0 98
14:25:50 1 2 0 97
14:25:52 1 1 0 98
14:25:54 1 1 0 98
14:25:56 1 2 0 97
14:25:58 1 2 0 98
14:26:00 1 2 0 97
14:26:01 1 2 0 97
Ideally i should have output at every one second, but it shows at every 2 seconds. Even i have tried to increase the interval but still i see it takes extra 1 sec. to give output.
These are the pretty newly configured Machine, do you think something to do with server perf./config/ etc ? Does this impacts perf. to my running workload on this machine ?
REgards
TilokWell, you could simply have a gigazillion fonts on your system that mess with the text engine. in that case some serious weeding out of fonts that you never use would help immensely. Otherwise you can always turn off hardware acceleration in the preferences, assuming the issue is related to that...
Mylenium -
Why does the new version FireFox run slower than the old one?
I have a fairly new computer but Firefox runs slower than the older version. Can this be remedied?
That does not sound right. I recommend rebuilding your VI. Beore you do, open the top level VI and press contol-shift-run arrow to perform a manual binary recompile. This makes LabVIEW recompile the whole code. Most times you will not see anything happen but occasionally an error will surface. Be sure to save the VI then rebuild it.
You may also need to reinstall the LabVIEW run time engine and/or LabVIEW. I would start with the run time engine first. -
Update Itunes version, now can't find"eject ipod"command
Every time I update Itunes I get some quirky problem. Just updated itunes version last night and now in the itunes tool bar, after syncing I have no "eject owners ipod command on the tool bar...diagnostics says Ipod recognized...sincs okay. ???
Hello dearel,
Perhaps this Support document can assist you. It providies all the ways you can safely disconnect/eject your iPod.
http://support.apple.com/kb/ht1853
B-rock -
ITunes 7.6 running slow with library on external drive
Ever since upgrading to version 7.6, iTunes freezes for about 30 seconds to a minute, every 2 minutes or so. Essentially, half the time i'm using it, I'm waiting for the "pinwheel of death" to stop spinning. My library resides on an external drive, when I open iTunes without having the drive connected, it doesn't freeze at all. Also, I noticed that when this freezing occurs, the light on my other external drive, and even my 4GB USB-key drive flash repeatedly, as if iTunes is searching for something.
I work for a music company and this is occuring on our two other Mac's as well: one is an iMac G5, and the other a duel-processor PowerMac G5. The iMac G5 actually has it the worst: when first opening iTunes, it is unusable for about 20 - 30 minutes while it seems to be scanning the external drive.
This did not happen with version 7.5.
I tried deleting iTunes preferences and reinstalling 7.6. I'm hesitant to roll-back to 7.5 as we have a ton of information in the library that I'm afraid to lose. But, if no other solution is available, that's what I might have to do.Two suggestions:
1- Have you looked at this announcement? http://discussions.apple.com/ann.jspa?annID=552
2- Are you certain it's not the external drive? If it is happening every time you plug the external drive into another computer (you mentioned an iMac and a PowerMac), then my inclination is to think the problem is with the external drive, and perhaps not iTunes. If the light is flashing on the HD, that doesn't necessarily mean that iTunes is searching for something; it means your HD is trying to complete a process. -
with itunes installed on my computer it freezes/works slowly/it freezes trying to get to itunes store/it freezes working on word or excel....all in all it makes my laptop horrible. when i uninstall it the computer works just fine.......help
With those symptoms, the following document might be worth a try:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store -
Extremely slow response on SetDataSource command
Hi,
I realy hope someone can help me.
I have a report with 44 sub reports, in the report header.
The processing is very simple, and the amount of data isn't large, i get the slow loading even when there is as little as 2 rows of data in the data set.
This report used to work fine on Crystal 9 and .net 1.1
we have now upgraded to .net 3.5 and Crystal 10.0 with SP 6.0
As soon as my application hits the SetDataSource command, it takes anywhere from 1 minute to 5 minutes.
Note that in the crystal designer it displayes the report instantly.
Note that in crystal 9, it displayed the report instantly.
I'm at my wits end, and at the point of throwing the report out totally, so i would appreciate any help.
The reason for the 44 subreports, is that i have a main report, showing one total for each subreport, and when you click on it, it displays the detail.
If there is a better way of doing this, i'm also open to any suggestions
Thank you in advance and anticipationI think here is the start of the problem:
"...we have now upgraded to .net 3.5 and Crystal 10.0 with SP 6.0"
Since you are using .NET 3.5 (e.g.; .NET 2008 ?) and CR 10 with SP 6 (CR 10.0.x), you are using an incorrect version of CR. Only CR 10.5 and CR 2008 are supported in .NET 2008.
Ludek -
Tried to download audio book from itunes. Already paid for with gift certificate. Partially downloaded. Says "waitin" has for last 18 hours. Cannot get into itunes app....nothing happens or changes. How to fix problem?
Hello Russlsmith
Close out of iTunes and then open it back up and try to resume the interrupted download of your audiobook. If you are still unable to download it, then report the issue to the iTunes store about your purchase.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G. -
I'm using photoshop cs6 - 64 bit. Whenever I choose the text command, photoshop takes like 15 seconds to get that command active. This was a problem in CS5 version too. What is a way to speed things up? This happens regardless of the filesize. I also have ATI Sunpro 8570 graphics 2gb.
Well, you could simply have a gigazillion fonts on your system that mess with the text engine. in that case some serious weeding out of fonts that you never use would help immensely. Otherwise you can always turn off hardware acceleration in the preferences, assuming the issue is related to that...
Mylenium -
My Mac laptop was running fine till I downloaded the latest itunes version this week, now all the programs are slow, ITUNEs cuts in and out. Anyone know what I did wrong?
Hello Mark Malecki,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having some issues with iTunes on your MacBook. You may want to isolate the issues further by testing to see if they persist in a new user account:
Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
You can also try starting iTunes in safe mode:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/TS3430
Thanks,
Matt M. -
I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
6% InterCheck
5% iCalExternalSync
3% WindowServer
2% CalendarAgent
2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outsUninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437 -
VISTA SYSTEM RUNS SLOW AFTER INSTALLING ITUNES 10.5.3.3
First I could not download Itunes new version 10.5.3.3 by clicking on down load in Itunes. I had to open my browersand go to Apple site and down load. Once down loaded I installed 10.5.3.3, Now it seems my system is running slow and hangs. Not just in Itunes but in other progams also. Any ideas?
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store -
WHEN IS APPLE GOING TO LISTEN TO ALL THE COMPLAINTS REGARDING THE USLESS PROGRAM THEY CALL ITUNES I HAVE UNINSTALLED DONE REG CLEANUP THEN RE INSTALLED THE LATEST VERSION MORE THAN 3 TIMES NOW AND IT STILL RUNS **** SLOW OR LOCKS UP. APPLE PLEASE FIX!! IT SEES MY DEVICES THEN WHEN I GO INTO THE DEVICE SUDDENLY CLOSES IT.
WHEN IS APPLE GOING TO LISTEN TO ALL THE COMPLAINTS REGARDING THE USLESS PROGRAM THEY CALL ITUNES I HAVE UNINSTALLED DONE REG CLEANUP THEN RE INSTALLED THE LATEST VERSION MORE THAN 3 TIMES NOW AND IT STILL RUNS **** SLOW OR LOCKS UP. APPLE PLEASE FIX!! IT SEES MY DEVICES THEN WHEN I GO INTO THE DEVICE SUDDENLY CLOSES IT.
-
While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message. I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly." I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!
Solving MSVCR80 issue and Windows iTunes install issues.
-
Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.
I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)
Maybe you are looking for
-
How can I get my money back, after purchasing a rip-off app?
I purchased a DVD creator app from the apple store. It doesn't work.
-
Chnage font size in payroll varinet (ZORD )
Dear Expert, I have done program to generate epay slips as PDF and mail to relevant users, I am using GET_PAYSLIP FM to convert pay slip to PDF And also I am using ZORD pay slip variant .my issue is when the mail comes to users its font size is too b
-
Dear PS gurus! Want to know that can we create one project having multiple plant, if yes ? how we will do costing?How to customize? plz let me know the concept. Ansar
-
Are there any recent tutorials or information for integrating Adobe Flex with Ruby on Rails 4?
I've combed and searched extensively and most of the documentation is anywhere from 4 to 7 years old. A lot of it focuses on outdated gems or libraries. I've even seen Rails 2.0 as a focus for a lot of this information. I would just like to know if
-
My old eMac doesn´t find the hardrive
After restart my eMac it appeared a folder with a question mark. I think my eMac doesn´t find the hardrive. I have tried to reinstall the system but of course it happens the same, it doesn´t find the disc where to install. I restarted pressing ALT an