Itunes video goes green and only plays audio, any reason or help to explain or fix?
iTunes playing videos, but only audio and screen is green, any suggestions of fix or reason?
Well, First of all, some of my .PDF files started to disappear without any reason, a year or so ago, a couple of months ago the "message" started to come up everytime I tried to shut it down or re start it. Then, the YouTube videos went "green" on Internet Explorer, and then on Google Chrome too! A couple of weeks ago any video saved on my Laptop, started to go "black", the same pattern, only audio could be heard, no images. It took a little while, I mean, after turning on my Laptop, 30 minutes or 2 hours later, tops, the YT videos would turn green,after watching 2 to 6 six videos on YT. and black, on Windows Media, at the same time, whenever I tried to play any video.
Then I tried the link that I posted before. And my Laptop is getting slower after that, the display has "blinked", 1 or 2 times this past week. Internet Explorer "crashes", and I have to re-open my "session" to see my previous visited sites. I think this last part, is normal, since everytime IE fails and you have to "close the program", and then open it again, it doesn't scare me.
What does scare me is to have a virus, or mallware. I have an antivirus, McAfee Security Center. And, I don't know what else to say.
I use my laptop to record music, I have 2 programs for that, and 1 or 2 more that came with a guitar pedal and a keyboard, and I don't know if I should have just one, instead of 2 programs (DAWs) installed on my laptop, does that affect my Laptop?
Thanks for replying.
Similar Messages
-
IDVD - One video in the project goes green, but still plays audio
As far as I can tell, no one has posed my particular problem, but I have complete confidence that I'll get some solid help. I've had 5 or 6 big problems with iDVD and found all the answers in these discussions. So thanks!
My boyfriend is a theater director and I have been putting together his DVD reel using iDVD 7.0.4. I am using the "center stage" theme with no motion or music in the menus. The DVD has slide shows of production shots and video clips.
-> I put the video into the computer by first using a VHS to DVD recorder and then using the program "HandBrake" to rip the DVD into .m4v, then edited them with QuickTime Pro "trim to selection" and saved the clips as .mov self contained movies.(I should add right here that I cannot use iMovie. My computer isn't big enough to run it properly with any kind of speed, and I don't know how to use it and don't currently have the time to learn it)
-> The VHS to DVD recorder inserted chapters every 5 minutes, and all of the clips included 2 or 3 chapter markers. I think the longest video is 8 minutes or so.
-> When I "add a movie" in iDVD and it asks me if I want to add chapter markers for the movies, I tell it no.
->When I preview the DVD in iDVD every video plays with out error.
-> I saved the project as a disk image and the videos were encoded under the "pro quality" setting
-> When I preview with the apple DVD player, every video and slide show plays through without incident except one. One video plays 3 seconds, then the audio skips a beat and the video goes all green. I have no idea why because the 3 other videos from this show came from the same DVD and were processed exactly the same.
Please Please Help! Thank You!
This is the first DVD that I've ever made, and I could have never done it at all without these discussion pages. I hope some programmer at Apple is reading all these problems and fixing them for the next iDVD...or at least writing down solutions to include in the help menu.Hi
I stumbled on the same problem as you. For me everything got messed up after trying to preview my project in fullscreen. Just got a blank black screen and now I can't ad titles or preview the clips! The most annoying thing is that I'm almost finished with the video I spent 4 hours on!
Anyone here now what the cause of this problem can be? Seems like many here have stumbled on it a few times
Edit: Just noticed my whole project seems to be done for! I can't even change the themes and when trying to change the settings of the clips it says "no clips selected" even when I can see they are in my project!? This is really frustrating.
Message was edited by: Wahlgreeen -
I have an Iphone 4S and It won't let me watch videos on my safari, which I do everyday. It says that I am connectef to a tv, yet I have not connected it to a tv during the entire time i've owned this product. I have not connected it to anything bluetooth either. It plays the sound through the device, but it will not play the video at all. the update is IOS 6.1.3
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
It's only playing audio but not showing video. What's going on?
Does the app you're using support video out?
-
I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played. I tried again with some different clips and some worked and some didn't. This hasn't happened before. What should I do? (I am using iMovie '09)
No guarantess but try smc and pram resets,
-
I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?
I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?
-
Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help
Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help
It all depends on the codec the file uses, Karli.
What model of camcorder is this video coming from?
Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
BY THE WAY, KARLI--
PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion. -
On my PC (Windows7 and ITunes10.6), my music videos only play audio. It did play both video and audio, but currenly only audio is working. Any advise is appreciated.
See if this article will help:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718 -
AppleTV will only play audio, not video
My AppleTV will only play audio, not video via Airplay. I've verified correct settings, reset iPad, AppleTV and router with no success. Please help!
Welcome to the Apple Community.
What is it that you were playing, some providers block their content from AirPlay. -
How can I play music through safari specifically youtube on my Mac book pro over soundlink to my bose wireless speaker I can only play audio from itunes at present? HELP PLEASE!
Should be able to go into your sound preferences and choose your output device, you can also try downloading Airfoil and try that, it's a pretty cool app.
-
Premiere Pro Only Playing audio when i press play. And it says "Media Offline" with a big red screen. What do i do?
And When i double click the video files in the editing program, another window pops up named: Source:Sequence 01. But the window Program:Sequence 01 Has a Red screen on it! But the file clearly works so i have no idea what to do.
-
How do I find the rest of the songs from Justin Timberlake's new album? I preordred it-it is listed in my purchases on itunes, but the only thing listed on my "music" is the album title that opens a special screen and only plays mirrors!
Step by step, how did you arrive at seeing this agreement?
-
I am using elements 10 and only getting audio not video. Can anyone please explain why? I am a total newbie to video.
greenfrogstone
Just saw your thread, and it looked like a candidate for the Premiere Elements 10 NVIDIA GeForce Roll Back the Driver issue. If your computer uses a NVIDIA GeForce video card/graphics card, then the following applies to you. You do not want to update the driver. Rather you want to roll back the driver version, probably to about May 2013. For your convenience I have done a copy/paste of the forum announcement which gives all the details and fix of the matter.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
This matter has been very specific to the Premiere Elements 10 NVIDIA GeForce card user. So, if your computer is using other than a NVIDIA GeForce card, it is likely that the message does not apply to you, and we can then explore other troubleshooting possibities.
Looking forward to your follow up. Do not hesitate to ask for clarification on anything written here.
Thanks.
ATR -
okay i have been trying to access the itunes store from my computer and after i click the tab the words accessing itunes store scroll across screen the the screens goes white and only the apple symbols is in the box.....WHY. Is the store down??
Hello there jodi o,
It sounds like you are unable to access the iTunes Store on your computer. I would recommend you use the following article to help troubleshoot that:
Can't connect to the iTunes Store
If the issue persists after using the info for your operating system in the above article, here is the more advanced version with further troubleshooting info:
iTunes: Advanced iTunes Store troubleshooting
If you are using Windows, you should also try the information in this article:
Apple software on Windows: May see performance issues and blank iTunes Store
Thank you for using Apple Support Communities.
All the best,
Sterling
Maybe you are looking for
-
HT1449 how do you move all music from two computers into one itunes account?
How do you move all music from two computers into one itunes account?
-
HP Deskjet 1050 All-in-One Printer series - J410A not printing photos
Hi, It's been months since I tried to fix the photo printing of my printer and until now it's still not fixed. My problem is that I can't print photos via windows photo viewer. When I hit print, it shows a printer icon on my task bar and it disappear
-
hi experts can u tell me for this <b>i want to get teja if i enter ravi in selection screen and press enter could u tell me what is the event and what is the logic for this </b>
-
I live in a rural area and have Satellite internet. That means Data caps. But, I have 5 hours of unlimited each night. 12:00am-5:00. Is there a software program or way to schedule my downloads from iTunes? I can usually manage my software updates, bu
-
Podcast only displays in single category
Hi, So I did some searching about this, but didn't really see any definitive answer. I just uploaded and got approved for the first episode of a new podcast. We're going ot be talking about a range of topics, mostly geeky stuff like games and comics.