ITunes volume plays incredibly low

While everything else on my computer plays at its proper volume--sound effects, youtube, etc.--iTunes plays incredibly low. I've turned up the volume on the iTunes pane and even tried adjusting the volume of individual tracks in their preferences. Still, every song plays soft and tin-like as if the built-in speakers were only headphones. I've installed the most recent iTunes update but the problem persists.
Advice?

I had the same problem also. Inside iMovie, Control-Click the movie. Then hit "Get info". Under Option is a volume adjustment for the movie file. Turn it up all the way. This worked for me. Good luck.

Similar Messages

  • Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

    Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
    There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
    What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

    If that's the best you can do why don't you get on another forum?

  • Volume of iTunes store music too low

    I have recently purchased several songs from the iTunes store, but when I try to play them on my iPod nano, the volume is too low. is there anything I can do about this?
    thanks in advance.

    Is it worth the $40?
    That's not something anyone but you could answer. It should give you much more control over your gain settings, but value is in the eye of the beholder
    Could I use all my instruments
    at once
    You couldn't record them to separate tracks, no. But anything you could plug into it could be "pre-mixed" and recorded to a single track (or using pan controls, mono instruments could be recorded to 2 tracks)
    or use the features with garageband, like the
    gain and stuff?
    I'm not sure what features you're referring to.
    And would it really increase the volume?
    It should. Others in this forum use this exact mixer very successfully, though I do not have this one myself.

  • ITunes volume significantly lower

    Hello,
    I recently updated to iTunes 11.1.5 (5) on my Mac mini (latest), and the volume output to my external speakers is significantly lower than before.
    As background my library is on a Lacie external HD, all lossless.  My mini is connected to a USB DAC, which is connected to a Denon integrated amp,  and then hifi speakers.  Since updating to iTunes 11.1.5 (5) the volume is just really low (takes increasing the volume level on my amp much higher than before to replicate the same desired volume).  To test this I first stupidly took apart my whole setup, tested the speaker wires and speakers, and amp/DAC, until I realized they were fine, and should compare iTunes to other media players.  Anyway, I played a concert DVD / you tube / i tunes with the same songs, at the same volume level and it is night and day, like iTunes is outputting 50% compared to the others.  This was never the case until the update as I mentioned.  I also saw some similar (much older) threads on here, with no solution other than checking the iTunes/Mac volume level, and equalizer level, and that is not the problem.
    This is really annoying because I have this whole setup just for music basically, so if anyone has experienced this / has any ideas on a fix it would be really appreciated!!
    Thank you so much,
    Tom

    I figured it out.  I went to see if an iTunes video had the same issue, and saw that the volume on the movie was set in the middle, and after adjusting to full volume, then going back to the music the volume was back at a normal level.  The problem is you can't see the iTunes volume under the default setting in 11.5, until you click Window, Zoom.  I thought the iTunes volume was the same as the computer volume button at the center-right of the screen, which it is not.  Anyway, hope this helps someone.  Time to put my entertainment system back together...

  • Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

    Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

    Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

  • When I send project to iTunes the volume is too low. I have auto normalize checked.

    When I save project to itunes the volume is too low on the entire project.  I have auto normalize checked.  I have been sure to reduce the volumes below the red clipping dots.  This includes the master volume.  It is fine in GB, but in itunes I need to increase the volume slider to max to bring it up to what I was hearing in GB.  Is sthere something else I should do to reproduce more volume when I share a project to itunes?  Thank you.

    DId you try a comparioson when exporting the same song with and without "Auto Normaize".
    Technically there is the possibility that "Auto Normilize" will reduce the overall level of your final mix. If there is a short spike above 0dB that you don't hear as an audible pop and GarageBand brings down the overall level to that that spike to 0dBFS, and by doing so, lowering that level of your mix by that amount.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • I have a galaxy S4. When I connect a headphone, certain songs play extemely low while others play at the correct volume. The same songs play fine thru the speakers. Can someone shed light on this.

    I have a galaxy S4. When I connect a headphone, certain songs play extremely low while others play at the correct volume. The same songs play fine thru the speakers. Can someone shed light on this.

        chrisglobe7,
    We want you to be able to enjoy all your music! Were all the songs downloaded from the same source? Are all the songs that play at the low volume from the same place? Is the music you are listening to stored on your device or a 3rd party application?
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • HT204370 the volume is very low on downloaded movies from itunes, and my volume is turned up all the way, and my volume is fine all other times???

    My volume is very low when I download a movie from itunes, and my sound is turn all the way up.  The volume works fine on everything else.  It's really hard to even watch the movie and enjoy it.  Why is this happening?

    Morning Al My issue has since been resolved after some advice from a friend. It was simple, push the optical cables in firmly until they click, however mine didnt click but there was definatley room for them to be pushed in further as if they are loose they "leak".  in addition to this on the TV settings, make sure that the TV speakers are turned off

  • I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

    I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

    I'm having the same issue.  After opening Audio Midi Setup in Utilities I noticed that the master volume slider of the Built-In Output is very low.  I am not able to slide to get any more level out of the system.
    Can you adjust the master volume on your system?

  • I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    Sorry if this is too basic or confusing
    Apparently in iOS 8 there are different volume settings for different applications
    The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
    So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
    Please let us know what happens
    Thanks

  • HT1222 itunes volume vs. direct play volume is dramatically reduced, what has happened??? Please help!

    Playing music through itunes has always reduced the sound slightly, but since the last update the sound is less than 1/10 of normal sound and slightly distorted. Full volume though itunes is like 1/10 of the volume playing the same track through the finder window directly.  WHat is going on??!! Please help!! Cant deal with bad sound! Living ****...

    Unchecked all to try but it made very minimal change. All volumes are on full - itunes, computer, and my amp is turned up twice as high as normal. Sound is so weak but when I play the same trak through finder with same settings it blares out clear and super loud I have to turn it down... Can only be the software i think... Who knows?

  • Ipod & Itunes Volume Issue

    Hi,
    I am having a problem with my iPod volume. It was not loud enough when the volume was turned up even halfway (barely audible). Only when I crank the volume to the max is it loud, but when I turn it down, to even three quarters it is not loud enough.
    So, I ended up updating to the latest version with the ipod updater, and added some more tracks to my ipod from iTunes. Now, iTunes is doing the same thing when I listen to the tracks on my computer! Even when I play a cd through iTunes, it is not very loud, but when I play the same cd through Windows Media Player, the volume is correct, and the sound is great.
    So, I think the volume issue on the iPod is now transferred to iTunes.
    How do I fix this?
    I have a brand new computer, and havent had any problems with this before. I have the 60GB iPod Photo.
    thanks!
    dell inspiron 9300 Windows XP
    Windows XP Windows XP
    Windows XP   Windows XP  

    No, I checked that. Its weird, in that the volume was too low on the iPod and it was fine on my computer, but when I updated my iPod it transferred to iTunes and now it is acting the same way.
    I dont know what else to try! help!

  • Turn off sound effects for iTunes volume changes?

    I've started getting audible squirt-noises each time I use the F9 or F10 or F11 keys to raise or lower iTunes volume. How I go back silent changes?
    I've checked iTunes help and Googled a few things and unchecked all the sound effects in Apple System Preferences but no luck. I want to keep using the keys, not the slider.
    Thank you
    Don

    Did you mean to ask this in the Tiger OS forum? Your computer information says you are running Leopard. I can request this post be moved to the correct forum.
    In Tiger you can toggle "play feedback when volume is changed" in the System Preferences > Sound > Sound Effects preference pane.
    Message was edited by: Limnos

  • Using apple remote to control iTunes volume

    This must have been covered before. I searched through 12 pages and couldn't find the answer. I simply want to be able to control the iTunes volume with my white apple remote. Presently it will only control system volume and I'm going out to a different device where system volume has no effect.
    This is for Snow Leopard. Appreciate the help.

    I too play iTunes to remote speakers (airplay express, apple TV, IOS devices running Speakers app.)  The volume buttons on my Macbook Air control the laptop speakers but won't control the iTunes application volume when playing Airplay.  Going to iTunes to click on a slider is frustrating when there are volume buttons on the laptop.
    Another App solution is Airfoil from http://www.rogueamoeba.com/airfoil/mac/
    There is a cost and I don't have a free Apple/Mac solution.  But with Airfoil, you can link the volume bottons to Airplay volume.  This is really a preference that iTunes should inherently provide.  But with Airfoil, I can push any audio app (Pandora, Spotify, browser audio, and even iTunes) to any number of speakers both Airplay and computer.  And Airfoil will link the volume buttons to the audio output on any of the speakers selected.  I no longer use the Airplay option from within iTunes but use Airfoil to push iTunes whereever I want and properly control volume.
    Hope this helps.  Sorry it is a third party pay app as the solution when Apple could just incorporate this simple request.

  • Speaker Volume Gone Too Low Suddenly

    Hi,
    I have an iPhone4 and it has worked like a charm for about a year now. Just recently, out of nowhere the volume on the speakers have gone extremly low. It is so low that you can only hear if you hold the speakers part of your phone close to your ear and there is no other sound/noise around you. On the first day this happened, I tried turning it off and back on again a few times without any success.
    Then when I was playing a game next day, the volume came back up again suddenly and the phone was back to normal. It only lasted a few hours though, the same thing happened again and the volume has gone low since then. I have tried so many things hoping it is a software issue and might get resolved by doing a factory restore, but it's not helping at all.
    Has anyone had this problem before? Any help would be greatly appreciated.
    And if this is a hardware issue, is it fixable by replacing speakers or something? What should I do next in order to get this resolved?
    Regards,
    Hiral

    Okay, for the record, the problem was dirt in the speaker, which was blocking it and muffling the sound.  I managed to open the case (thank you Youtube) and get in their with compressed air, which managed to blow out whatever junk was in there.  It made a huge difference.  So that was it!

Maybe you are looking for

  • Viewing XMP Metadata in Adobe Bridge via Adobe Drive Connector

    Hi there, I've been trying to view remote file XMP metadata in Adobe bridge via our adobe drive connector. I've added the READ_XMP_METADATA capablitiy, and I've seen the DataType.XMP has been requested. but I'm not sure how to display the metadata on

  • Problem with access into the main stage

    hi, how are you guys ,, i hope you fine here is my problem i have file fla called "game.fla" and there are alot of frames in the main stage  i wanna move it from class called "admin" in the library but how?? i tried to this parent.gotoAndStop(39); bu

  • Asset Sub Number with Letter

    Dear Expert Is it possible to define asset sub number using letter? e.g 1000000001 A001 Thanks and Regards, YL

  • Document splitting-wbs, Order

    Hi users Is it possible to have document splitting by characteristics wbs, order and GL accounts  is payable in nature. Please clarify how. suppose i make two characteristics will i be posting a single transaction to both the characteristic or it sho

  • PIPs with attachments

    Hi All, One of the requirement I have here is to process a PIP with attachments. Normally a PIP message starts with (for example); <?xml version="1.0" encoding="UTF-8" ?> <Pip4C1InventoryReportNotification> <fromRole> ........... But in this case I a