Itunes was not installed correctly error 7 windows error 126. I have tried 3 or 4 times with the same result. I have deleted a previous version and tried a fresh install. I still get the same error. help please!
I have tried to dowload and update itunes on my PC. I have had an error message error 7 (windows error 126) several times. I have deleted the previous version of itunes and tried a clean install, with the same result. What am i doing wrong????
Hi DavidTPerrett!
I have an article for you that will help you troubleshoot this issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for using the Apple Support Communities!
Cheers,
Braden
Similar Messages
-
I have tried every step you have listed in your FAQ section for enabling and disabling cookies but I am still getting error messages "cookies not enabled" on certain websites? Why is this and what do I need to do to fix this?
I have STILL NOT received an answer to my question as of this date. I am VERY disappointed in Firefox support.
-
I will try to describe the problem as well as I can; I've seen quite a few posts about this problem already but I am yet to find anything that really helps.
Basically, I thought my rear camera had a hardware problem as when I opened the camera app all I would get was a black screen. Despite this I was still able to use the front camera without a problem. Thinking it was the camera I ordered a replacement which I have since installed and I am still getting the same issues as with the old camera.
I'm comepletely stumped, I've looked at many forum posts etc. about this and have yet to see anything that is helpful.
Is this a software issue?Nobody here would know. You took it unto yourself to repair a non-user servicable item instead of going to an Apple store or authorized servce provider when you had the original problem. Your best bet now is to go and do a Google search or take it to a third party (unauthorized) service shop. Apple will never touch that phone.
-
I received an Iphone 5 as a gift two days ago. The first thing I did was set up ICloud for photos. Itunes would not allow me to add songs to my new phone without restoring it, yet when I did this, it deleted all 129 photos of my graduation and friends from the past two days. And I cannot find them anywhere, photo stream, ICloud, nothing. Where can I get back my memories?
Were the photos taken by your new iPhone? If so, did you not import them off your phone to your computer (as you would any other digital camera) before the restore? If not, restoring wiped the data off the phone and your pictures are gone.
Sounds like a good time to (re)read the User Guide. -
When I installed the update originally, it said it installed correctly. How do I fix this?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659) -
So, yes. Backed up, synced, and I have all my purchases transferred... The thing is, I just got a MacBook Pro for my birthday, and I get the error message saying "Updating to iOS 5.1.1 will delete all of the apps and media, including iTunes Store purchases, on your iPhone. To preserve your content, apply this update on the computer where you sync apps, music, videos, and photos.. "
The computer I had been previously using simply would not recognise that iOS5 was available (it was a Windows PC; this is my first apple computer.)
So... Is it safe to update it?
What would I have to do to qualify this laptop as the "computer where I normally sync"?If everything is on your computer, as it should be, then you are safe.
Not sure what you want.
Your iphone simply mirros the selected content of your computer. If all of your content is on your computer, then it will be on your iphone. -
What do I do with the bonjour service issue? I have read blog after blog and nothing works. Please help.
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Itune will not download correctly on windows xp
i got a new ipod touch for Christmas and was very excited to use the device. I followed the instructions and downloaded the newest version of itunes (version 9). It downloads fine and goes through the entire process but when I go to open itunes I get this exact message.
"Apple Application Support was not found
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
Error 2"
please help me it has done this for two days now.... I just want to use my ipod. this is very disappointing.=(NTVDM.exe is the executable for the Windows NT Virtual DOS Machine [NTVDM]. It is an emulation platform for running 16-bit DOS applications on the 32-bit NT subsystem (NT/2000/XP).
In order to avoid the problem you are having, make sure you are using cmd.exe and not command.com. Cmd.exe is an updated DOS shell that offers higher compatibility with modern applications.
If you are already running cmd.exe, try running it in a separate memory space: you may have a 16-bit application running on the NTVDM that is crashing other applications.
In XP, the "Run in Separate Memory Space" check box next to the RUN dialogue is diabled by default. To enable it, add the following REG_DWORD to your registry, but I'm not responsible if you botch up your registry:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\
MemCheckBoxInRunDlg=1
-- Phil Bayer -
When I try to download apps I get an error message referring metro apple UK but when I try to do this I get the same message ergo unable to load up any apps... H e l p please...
Change to UK App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done". -
I have an older pc with itune songs on it. Trying to burn to disk. Tells me that the computer is not authorized to do this, it is. Have tried de-authorizing it and re-authorizing it and I'm able to do that. Then if I try to authorize it, it says it already is, but still won't allow me to work with my songs, still says not authorized. The songs I'm trying to burn were purchased from the itunes store, but don't show up on my purchased songs on my new iMac, not sure how to find them. Any ideas? Thanks!
Thanks for trying to help!
Tried it without much success though.
Looked good at first. I was able to unauthorize it and after rebooting all I went in under "store" and authorized it again, witch it did without a hassle.
But, when I had restarted everything again and tried to sync with me iPhone I still got "Part of the programs in the iTunes library, for instance 'yadda-yadda-app' was not installed on the iPhone unit 'The name of my iPhone' because you are not authorized for them on this computer. You can authorize this computer for purchases by choosing store - Authorize this computer"
(Translation to english might include minor errors...
So... Any other ideas on how to sync my iPhone with my iTunes?
(Oh, and my iPhone has never been jailbroken or anything like that.) -
When I open the apps I´m asked to activate it with a product key. Another problem is that one app is listed as installed in CC, but is not downloaded.
Please help. Have work to do.
BG
MayaMaya Nielsen please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html to restore your connectivity to our activation servers.
-
Hi! Today I tried to update my ipod touch 4th generation to ios 6.0.1. But the final result was my ipod being reset to factory settings. I don't know what happened. Does it mean I lost everything on my ipod? How do I get everything back? I had backed up my ipod on my computer before updating. Will that help? I don't know what to do now. I'm not very good with anything electronic, so now I'm afraid to touch anything in case I make it worse...
The backup that iTunes makes does not include synced media like apps and music. Se the following for what it does contain.
iTunes: About iOS backups
http://support.apple.com/kb/HT4946You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Can I have help please?
IOS device do not support Flash
However Skyfire, Photon, iSwifter, Browse2Go and Puffin Web Browser will provide limited Flash capability -
Instead I get the thumbnail page which Id rather not have. I x'ed out all the thumbnails so only the google.ca one is there but it's not a full page, just a thumbnail. I realize I can enlarge it. This is not a huge problem but I would like it solved.
Just to lay out the recipe all in one place:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Note: as per cor-el's suggestion, open the Google page you want and copy the "final" URL from the address bar to paste in when you update this setting. If you use a shortened version, then Google will send Firefox a redirect every time, which is a waste. -
HAVE A MACBOOK PRO 2006 WITH NO OPERATING SYSTEM ON IT WHAT OSX DO I NEED FOR A FRESH INSTALL
I had to install new hhd and have no luck w/reinstall disc, so I believe I need retail disc does it matter what version of osx I use?
There were numerous MacBook Pros released in 2006. http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html
The earliest came with OS 10.4.5 installed, but the max is OS 10.6.x. The last came with OS 10.4.8 installed, but the max is OS 10.7.x.
If you are able to get the original install discs from Apple, you should probably upgrade to OS 10.6.x or 10.7.x.
Cheers, Tom
Maybe you are looking for
-
There should be a Mac only thread in here
i don't know about the rest of the mac users, but i find it difficult, if not impossible, to **bleep** through all the windows related posts. just about everything posted in here is meaningful only for windows users. the small percentage of mac relat
-
pls provide the details wat type of quest ask to hr department bcoz i dont have the he domain knowedge & i boss sent to hr deparyment but no response from this side , plz guide how to learn the process .thanx in advence.
-
Music dropout when remote speakers used through AE
Installed two AE for two seperate sets of remove speakers. Intent to create muti-room sound. System connects but music drops out enire system every 30 seconds for about two seconds each time. Has anyone found a solution. 1 AE tech support doesn't hav
-
Hello, is there the possibility to send attachments (in base64) with a sender proxy to SAP PI? Which possibilities or restrictions would I have for thise case?
-
....Our first template matches "/", the XPath expression for the document's root element. <xsl:template match="/"> // line1 <xsl:apply-templates select="greeting"/> // line2 </xsl:template>i have been stuck. actually, i want to know the role