ITunes Wifi sync has stopped working

iTunes has stopped syncing over wifi with my iPhone 5S and iPad Mini. It's always been a bit flaky, but has recently stopped working completely. iTunes will not see the devices unless I either reboot them, or plug them in with the Thunderbolt cable, deselect and select "sync with this device over wifi" and apply. If I try to use wifi sync, iTunes gives me a "looking for device" message and then drops the connection.
My set up is a Mac Pro running 10.10, hooked up to an Airport Express via Cat 6. Both iOS devices are on iOS 8.
I have tried changing the IPV6 settings on both my machine and my Airport Express, resetting the network settings on both iOS devices, and flushing my machine's DNS cache.
I see the following messages repeated in my system log:
10/17/14 10:51:03.004 PM iTunes[2424]: Entered:_AMMuxedDeviceDisconnected, mux-device:1
10/17/14 10:51:03.004 PM iTunes[2424]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:1
10/17/14 10:51:03.005 PM iTunes[2424]: tid:244b - BootedOS mode device disconnected
10/17/14 10:51:07.123 PM iTunes[2424]: Entered:_AMMuxedVersion2DeviceConnected, mux-device:2
10/17/14 10:51:07.140 PM iTunes[2424]: tid:244b - unable to query device capabilities
10/19/14 3:32:41.583 AM com.apple.usbmuxd[56]: HandleUSBMuxConnect Client 0x103c017d0-AppleMobileDeviceHelper/com.apple.SyncServices.AppleMobileDeviceHel per requesting attach to 0x4:62078 failed, no such device
10/19/14 3:32:41.583 AM AppleMobileDeviceHelper[15815]: AMDeviceConnect (thread 0x7fff74ccd300): Could not connect to lockdown port (62078) on device 4 - cda9592d30dad5b13a61189fdc7d7abebcb71eca: 0xe8000084.
10/19/14 3:32:41.660 AM AppleMobileDeviceHelper[15815]: 15815:1959580416|DeviceLinkListener.c:_copyMobileDeviceValue| ERROR: Could not connect to attached device: This device is no longer connected. (132)
10/19/14 3:32:41.660 AM AppleMobileDeviceHelper[15815]: 15815:1959580416|DeviceLinkListener.c:_setMobileDeviceValue| ERROR: Could not connect to attached device: This device is no longer connected. (132)
10/19/14 3:32:41.661 AM AppleMobileDeviceHelper[15815]: 15815:1959580416|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarge t| ERROR: Could not set tethered sync info ({
    SyncingOS = iPhone;
}) in lockdown for com.apple.Bookmarks (Bookmarks): -402653052
10/20/14 12:16:38.119 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 1
10/20/14 12:16:38.119 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 2
10/20/14 12:16:38.119 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 3
10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 4
10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 5
10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 6
10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 7
10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 8
10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 9
10/20/14 12:26:50.255 AM iTunes[15786]: clip: empty path.
10/20/14 12:26:50.287 AM iTunes[15786]: clip: empty path.
10/20/14 12:26:50.334 AM iTunes[15786]: clip: empty path.
10/20/14 9:11:27.248 AM com.apple.usbmuxd[56]: _SendAttachNotification Device b8:e8:56:cd:bb:10@fe80::bae8:56ff:fecd:bb10._apple-mobdev2._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
10/20/14 9:11:29.048 AM iTunes[15786]: Entered:_AMMuxedDeviceDisconnected, mux-device:47
10/20/14 9:11:29.048 AM iTunes[15786]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:47
10/20/14 9:11:29.048 AM iTunes[15786]: tid:17e3f - Mux ID not found in mapping dictionary
b8:e8:56:cd:bb:10 is the wifi address of my iPhone.

Hi littlejimmym!
I have an article here for you that will help you troubleshoot this issue:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/ts4062
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Similar Messages

  • Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers and my iTunes wifi sync isn't working. Anyone else having the same problems?

    Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers / docking station and my iTunes wifi sync isn't working. Anyone else having the same problems? Both worked fine until the update...

    Okay. I got it working again by setting it up as a new phone instead of just syncing. Then I backed up. All is good today.

  • ITunes Helper Module has stopped working

    I just downloaded the new version of iTunes and now iTunes and Quicktime wont open at all. When I click on iTunes or when I first turn the computer on, a window pops up that says the iTunes Helper module has stopped working. Then another window pops up right after that says "iTunes has stopped working". It checks for a solution to the problem and then says "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." When I try to open QuickTime, it says "Runtime error! Program:C:\Program Files\QuickTime\QuickTime Player.exe This application has requested the RunTime to terminate it in an unusual way." I have Vista which seems to cause problems with the firewall and iTuens, so I turned off the firewall from my security software, switched on the windows firewall, and made sure the settings were right. I even tried doing a System restore to the previous version (same problems) and then tried reinstalling the new version (Still same problems). Anyone have any suggestions?!?!

    hey stess,
    I have the exact problem you have. I tried deleting (went into program files and deleted the folders ) from my system and reinstalling it. It worked until i rebooted my system, I am still on xp. The restore doesnt help either. It cant be my ipod ( its quiet old!) as it isnt even connected to my system at start up. I think maybe a bug with the new version that will eventually have more and more users affected when they update. I f i find a solution I will post asap... good luck

  • Have a error message "canvas database sync has stopped working"?

    Have a error message "canvas database sync has stopped working"? My computer is a HP touchsmart 300, windows 7 64 bit OS? Need help in fixing it.

    Does it work in a new file? If it does, see Remove minor corruption by exporting. If not, see Replace Your Preferences

  • MobileMe and iOS 4- Syncing Has Stopped Working

    Since "upgrading" to iOS 4, MobileMe Calendar Syncing has stopped working. This is the worst upgrade. Slow iPhone, spotty usability, and now MobileMe syncing isn't working.
    Anyone else having the same problem? Any fixes. I've tried the usual. Push: On, MobileMe Sync: On, etc....

    Like you, I ran into MobileMe synchronisation problems after I upgraded my iPhone’s software to iOS 4. I have an iMac running under Mac OS X version 10.6.4 and a 3G iPhone. I was able to solve the problem with the following “brute-force” (but very simple) sequence, which I also used after prior iPhone software updates and it has always worked for me. Note that it involves the removal of all contacts and calendars from the iPhone so if you are worried that you may not succeed in copying the data back, you may want to look for another solution.
    (1) Make sure that MobileMe is synchronized with iCal and Address Book:
    Open MobileMe Sync Preferences
    Click on the “Sync Now” button
    (2) Back-up the data in the iCal and Address Book applications (just in case):
    File / Export / iCal Archive
    File / Export / Address Book Archive
    (3) To avoid erasing the data on the computer if something goes wrong:
    Open MobileMe Sync Preferences
    Select the “Sync” tab
    Un-check “Synchronize with MobileMe”
    (4) On the iPhone:
    Settings / Mail, Contacts, Calendars
    In the “Accounts” section, select the MobileMe account
    Turn “Contacts” off
    Select “Delete from My iPhone”
    Turn “Calendars” off
    Select “Delete from My iPhone”
    (5) Check that all contacts and calendars have been deleted from the iPhone, then do:
    Settings / Mail, Contacts, Calendars
    In the “Accounts” section, select the MobileMe account
    Turn “Contacts” on
    Turn “Calendars” on
    (6) Wait (it may take a while) until all contacts and calendars have been updated on the iPhone, then do:
    Open MobileMe Sync Preferences
    Select the “Sync” tab
    Check “Synchronize with MobileMe”
    After having done all this, changes made to contacts or calendars on the iMac or iPhone were properly synchronized with MobileMe. You may have tried something similar without success, but if you have not, hopefully the above will work for you too.

  • Itunes wifi synce won't work on windows 7, why?

    I've tried everything to get itunes wifi synce to work on windows 7. But I don't seem to be getting it. It's not working.
    I'm running Ios 5.1.1 and the latest itunes 10.6.3. Any solution about getting itunes wifi synce to work.
    I'm open for any solution and will try al l of them.

    I've been dealing with this issue for quite sometime now, keep going back to the same suggestions over and over from here and other sources. The common thing I see here is having the bonjour services restarted to get things working correctly. Being on windows 7 64x I didn't have a problem before. Something changed though. Today I though of "hey what about running as admin" since it seems some programs require admin running status to work properly. So in Task Manager under the Processes, (have show processes from all users checked) Anything that has to do with iTunes/Apple/Mobile/etc. I right clicked> Properties>Compatibility>Run as Admin.
    So far this has solved my issue. Hope this helps others.

  • Itunes wifi sync does not work after upgrade to OS X Yosemite

    Hi,
    After upgrade to OS X Yosemite itunes wifi sync with my ipad and iphone stopped working. After attaching the iphone and ipad with a cable, I could sync, but as soon as the cable was removed, the ipad and iphone disappeared again from itunes. And wifi did still nok work.

    Apparently something is not being saved somewhere and this technique forces the save.  Below is a C&P from another poster describing the technique on a different thread.  It's been working for him for some fifteen hours.  I tried it and it's been working but it's been only ten minutes.  My gut feel is that quitting and relaunching iTunes are critical steps.
    With the device connected via cable, click on its icon
    Uncheck WiFi syncing
    Click Apply
    Quit iTunes
    Launch iTunes
    Check WiFi syncing
    Click Apply

  • ITunes 10.6 has stopped working on windows 7

    I just bought this Lenovo H415 desktop with windows 7 home premium.
    I installed a earlier version of iTunes and it worked fine. Then I updated it to the latest 10.6 version, and it gives me the following error after I click "agree" for the agreements whenever I start it.
    iTunes has stopped working
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    iTunes.exe
      Application Version:    10.6.0.40
      Application Timestamp:    4f56cf56
      Fault Module Name:    QuickTime.qts_unloaded
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    4cf45322
      Exception Offset:    660a1040
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\windows\system32\en-US\erofflps.txt
    I tried reinstalling it, and I also tried to uninstall it and install it in a newly created admin user account. But I am still having the same problem when starting iTunes.
    Please help. Thanks.

    Hello,
    I've been unable to use my iTunes ever since upgrading to v10.6 Today with the new roll out of v10.6.1 I ran the fresh update hoping the issue would be resolved... After the update, Same CRASH issue at opening...  I was able to FIX this on my own after messing around with an extremely confusing support article. http://support.apple.com/kb/TS1717
    Try doing this troubleshoot and see if it helps you, it worked great for me! After I moved the first folder location listed below, my iTunes was fixed! I have since deleted that folder I had moved earlier and iTunes it's still working like a charm. I've also re-wrote the instructions for you more clearly then apple did.
    Remove iTunes Preference files
    Some of the files that iTunes uses to store it's settings and preferences may be unusable and cause issues.  iTunes has two folders where it's preferences are saved. Move one of the folders to another folder location ie. (my documents, etc.) and try opening and running itunes to test.  This is to see if the issue persists after removing these files. If the issue does not persist, simply delete the moved folder and enjoy using iTunes! However, If the issue still persists, move the folder back to where it was originally and try the same process again, this time moving the second folder. The location for the two preference folders are:
    C:\Users\username\AppData\Local\Apple Computer\iTunes
    C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Really hope this helps you!

  • ITunes v11.1 has stopped working on Windows 7 Enterprise 64bit

    Hi to all. I have brand new Dell's Latitude E6540 laptop with Windows 7 Enterprise edition 64bit. I downloaded the newest iTunes v11.1 and installed (Run as Administrator) it on my new laptop. After I start iTunes in less then minute the small windows pops-up saying "iTunes has stopped working. Here is copy of error:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    iTunes.exe
      Application Version:    11.1.0.126
      Application Timestamp:    52394b24
      Fault Module Name:    KERNELBASE.dll
      Fault Module Version:    6.1.7601.18229
      Fault Module Timestamp:    51fb1116
      Exception Code:    c06d007e
      Exception Offset:    0000c41f
      OS Version:    6.1.7601.2.1.0.256.4
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    So, what is the fix for that Itunes problem? Thanks for help. vpanov

    Try copying the QTMovieWin.dll in the  c:\program files (x86)\common files\apple\apple application support folder to the c:\program files (x86)\iTunes folder. I had same problem and it's fixed this bug.

  • Itunes 10.5 has stopped working message on windows vista

    Hey Guys.
    I've just updated to iTunes 10.5, currently running vista 32bit.
    I get an error message when i try and start up itunes saying itunes has stopped working, then this...
    Problem Event Name:          APPCRASH
      Application Name:          iTunes.exe
      Application Version:          10.5.0.142
      Application Timestamp:          4e9243f2
      Fault Module Name:          CoreAudioToolbox.dll
      Fault Module Version:          7.9.7.8
      Fault Module Timestamp:          4e72cbf1
      Exception Code:          c0000005
      Exception Offset:          0023e3c2
      OS Version:          6.0.6002.2.2.0.768.3
      Locale ID:          2057
      Additional Information 1:          fd00
      Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
      Additional Information 3:          fd00
      Additional Information 4:          ea6f5fe8924aaa756324d57f87834160
    in the tab.
    Have tried install and fix, have tried uninstalling itunes and all apple software and reinstalling but no help.
    Anyone got any ideas?

    How many cds have you ripped since replacing the drive? I think you have just been lucky.
    I mostly use an external cd drive. I still have the problem with both internal and external drives.
    Remember this problem is random. I have tried 3 cds in a row and had no trouble, then on the 4th the issue is back.
    I don't believe this issue will completely go away until Apple prvides a fix with an iTunes update.

  • ITunes WIFI Sync is not working on win7 64 bit OS

    I am having problems using itunes wifi syncup with windows 7 64 bit OS. I connected the cable and enabled the option under summary screen. The "syn now" is enabled now under settings -> General -> itunes wifi sync up. When i un plug the cable from my computer, it is greyout and displays "Sync will resume when XXX computer is available". Its annoying. Push some ideas !!

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue with your purchase to the iTunes Store.
    Regards.

  • IPhone/iTunes Wifi sync doesn't work

    Hi guys,
    I don't even have hope to solve this problem anymore but I guess I should post this anyway and show apple the crap software they're giving us.
    I'm on Lion 10.7.4 (iTunes 10.6.1) and, after upgrading my iPhone 4 to iOS 5.1.1, my Wifi sync with iTunes stopped working. Out of nowhere. Looking for an answer I started digging on apple foruns and found out there are dozens of threads discussing the problem and literally hundreds of possible solutions. I've tried the following:
    - Restart iTunes and iPhone (full power cycle).
    - Check the "Sync over Wifi" option on iTunes when iPhone is connected using cable
    - Uncheck the "Block iPhone, iPod and iPad from automatically sync" on iTunes > preferences > devices.
    - Restart Router
    - Reinstalling iTunes
    - Restore iPhone
    - Move to trash "com.apple.iTunes" and "MobileDevices.framework" files. Restart Mac after.
    - Make Airport on Mac and iPhone forget the saved networks and reconfig them
    - Open ports on router 123 (all), 3689 (TCP) and 5353 (UDP)
    - Disable and enable uPnP on router
    - Install Remote app
    - Use "Release Liase" option on iPhone under Settings > General > Network > Wifi > Blue Arrow
    NONE solved it. I gave up. Apple *****.
    Interesting behaviours:
    - Remote app doesn't work at all. I can't use it under Home Sharing or that code thing. My phone and Mac simple can't see each other anymore.
    - iPhone conects fine using cable. Everything is working and, when I pull out the cable, iPhone vanish from the list. Even with the Wifi option enabled.
    So, if any of you can solve it, you will have a place in heaven. And in Apple developing team, probably.
    Thank you!

    Hi guys,
    As I suspected, none of the previous solutions worked. I strongly believe this is some crap in iOS 5.1.1 OR iTunes 10.6.1. More precisely: this is APPLE fault, not something we did wrong or didn't do.
    My Wifi sync worked great before this updates (Lion 10.7.2 and iOS 5.0). I can't isolate the problem because I did both updates in less than 24h from one another. Now I'm back to cable and I think I'll still be until Mountain Lion is out.
    @rodrigonewtonI sent apple my feedback. Basically everything I wrote here. And I can't connect bluetooth either. Luckily I barely use bluetooth on my Mac.
    @ou812ManySushi Lucky you! I'd already tried this without success. What is your iTunes and iOS?
    @joejohns90 Doesn't work here, the option is ALWAYS greyed, waiting for my Mac to do something. The only way the "sync over Wifi" button work is pluging the cable. Ironic, isn't it?
    Anyway, thanks for the feedbacks guys!

  • ITunes wifi sync doesn't work since moving Mac to a new Airport

    Hi,
    I recently moved my Mac mini which acts as an iTunes 'server' for all the other devices/computers that I have at home from being Ethernet connected to the airport base station in the middle of my network (the Time Capsule described below) to the Airport Extreme at the end of my network. Since moving this, all my devices continue to show in iTunes but if I try and initiate a wifi sync it spends 10 to 20 seconds trying to find the device and then fails (the device then shows "Sync will restart when mini becomes available" or similar). If I completely reboot all my airport base stations it seems to start working for a while. For info, I have tried disabling the Mac mini firewall but it has no impact. Sync works perfectly with a cable and used to work pretty well (but not 100% of the time) before I moved the Mac mini.
    Any help or ideas would be really appreciated, my network layout is described below:
    My network cosiest of a Sky TV broadband ADSL model & wifi router which provides internet and DHCP using 802.11b/g.
    Connected to that via a long Ethernet cable I have a latest gen. Airport Express in a different part of the house creating a 2.4Ghz 802.11n only network with 'Allow this network to be extended' checked.
    I then have a 1st gen. Time Capsule extending that network and an Airport Extreme (not the latest version)  which extends the network further. If I look at the iPad Airport Utility app I see this network as a long, straight line where each extends the previous.
    I have all the Apple Airport devices in 'Bridge mode' so that the Sky device is providing DHCP for the entire network.
    I have an old-ish Mac Mini (Intel single core) running a fully updated version of snow leopard (can't update to Lion on a single core)  with the latest version of iTunes. I have several iOS 5 devices (fully updated).
    Regards,
    Phillip.

    Just noticed a typo: I moved FROM plugged into the middle of the network to the END of the network and then plugged into that base stations ethernet.

  • Backup/sync has stopped working

    My backup/sync stopped working in the middle of a backup three days ago.  But PSE7 shows that backup/sync is working normally (green arrows).  It also shows files pending back up.  Synchronization is turned on for the album's needing back up.
    I have tried pausing and restarting sync, restarting PSE7, and rebooting.  Nothing works.
    HELP!!!!

    No raw files.
    But the backup/sync agent sent a message to my computer at startup that
    stated that it could not find an Internet connection and has been unable to
    backup for the last five days.  The computer has been continuously connected
    to the Internet through a cable connection every day through that time
    span.  So the backup/sync agent cannot find the Internet for some reason.
    Is there a way to reset that?

  • Home sync has stopped working

    I am running a mac mini server with server 3 app. I have a mobile account on a MBP and a MacBook Air. The Air has stopped syncing to the server. Everything is running 10.9.4.
    I have checked in the user setting and the server is still linked to the computer, it has the right DNS settings.
    I have rebuilt the permissions on both the MBA and the Server. My home folder is set to the User folder on the server.
    The last sync was 3/7/14. When I manually click sync it starts and finishes in 3 seconds.
    Have searched many forums and can't find an answer to my problem.
    I have an older MBA (10.9.4) that works fine, and an White MB - no problems there. My MBP
    Please ask me questions about my setup.

    Below is what i got, is it helpful?
    07/08/2014 08:00:30.284 mount_url[993]: TUAMHandler::SetUAMType setting UAMType to 1
    07/08/2014 08:00:30.317 mount_url[993]: ERROR: AFP_Mount - theEnumerator->Mount failed 2
    07/08/2014 08:00:30.321 automountd[949]: mount of /Network/Servers/server.thenashes.org.uk/Users failed: No such file or directory
    07/08/2014 08:00:30.462 mds[78]: (Normal) Volume: volume:0x7fe1b9967000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Users
    07/08/2014 08:00:32.000 kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Users, flags 524288, pid 998
    07/08/2014 08:00:32.000 kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff80209f2530
    07/08/2014 08:00:32.000 kernel[0]: ASP_TCP Detach: Reply queue not empty?

Maybe you are looking for

  • XML not seen correctly in browser

    Hello:  My archives xml in browser of the QAS server are seen thus:  002b6e60-5235-2910-069a-aa6eb62c02b8.xml But in the server source DEV does not happen the same, is seen correctly.  This it happened after passing this file using the WebDav.  I wai

  • How to relate Customer UOM with SAP UOM

    Hi SAP Gurus I wanted to to relate Non-SAP customer's UOM with our SAP UOM. For example: Customer1 has PAK mean PAC (in SAP) Customer2 has PAB means PAC (in SAP) How to do that? Thanks for your inputs... Edited by: Harpal Singh on Mar 30, 2010 10:34

  • Installation of new HD, How to copy

    I have a 150GB Hard drive that came with my T61.  I have purchased a new 500 GB for my T61.  I do have the Ultrabay HDD adapter. What is the best and easiest way to copy the entire drive to the new drive and swap them out? Solved! Go to Solution.

  • Why i cannot buy using my itune id?

    Why i can use my itune id? Can i buy gems clash of clan using my itune card?

  • Can anybody explain in detail reference cursors?

    I couldnt understand the concept of reference cursors in details Regards shweta