ITunes will not burn playlists after loading the ION USB Turntable software

Loaded EZ vinyl converter, which allows copying of LPs and importing them into ITunes. All went well with first album and it can be played on my computer. I cannot burn a disc- either the LP I loaded or music already there.
The discs are good.
Any others with this issue?
Any solutions?

All my LP downloads go well and they sound great over the computer's speakers, but I can't burn anything, either from iTunes or from Windows Media Player.
I even deleted the turntable software and tried burning, with no luck.
And, I haven't gotten a response from the ION folks.
I don't want to take the computer to my local fixer, only to find that there's a simple software solution.

Similar Messages

My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.

Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."

Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

My xp version of iTunes will not let me communicate with the store

my xp version of iTunes will not let me communicate with the store, I did have an internet issue but has since been resolved. I think.

Unfortunately, you're not the only one. There are a lot of people experiencing the same problem after upgrading. Check out the many recommendations and suggestions throughout the forum. It's worth a look. Good luck!
Windows XP Pro

HT5654 Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

Itunes will not open on my computer the icon on desktop has changed to a white foldertype icon. itunes is listed in programmes on my start menu but will not launch either

please help
itunes will not open on my computer the icon on my desktop has changed to a white folder and it is still listed in start programmes but will not launch i am concerned about losing all my downloads

You music etc should not be affected by problems with the iTunes program, nevertheless it is always a good idea to backup your data.
You haven't said if there was any error message when you tried to start iTunes. If there was one please give it in full.
Also check to see if QuickTime works, iTunes can not work without it. If QuickTime doesn't work, it has to be fixed before worrying about iTunes.
Then restart your PC and open your Task manger and select the Processes tab.
Try to start iTunes, does iTunes.exe appear on the processes tab? If so does it disappear again or remain although the programs does not open?

ITunes will not display my iPhone on the device tab, message appears saying error in reading iPhone what can I do to correct this, I have tried everything suggested in apple support

iTunes will not display my iPhone on the device tab, message appears saying error in reading iPhone what can I do to correct this, I have tried everything suggested in apple support

- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT3965 i put an emoji in my ipod name , and itunes will not recongize my ipod. could the emoji be the cause to my problem? what should i do?

i put an emoji in my ipod name , and itunes will not recongize my ipod. could the emoji be the cause to my problem? what should i do?

If you think the emoji is the cause of the problem, why not remove the emoji from your name?

OSX will not start up after loading iTunes 5

Just down loaded and installed iTunes 5. OS 10.4 will not start, it hangs at the apple logo. Any suggestions?

Try booting into Single User Mode and run the File System Check. Then, if you can successfully boot up, run Disk Utility and repair disk permissions right away.
FSCK - File System Check
To start up in single-user mode
1. Restart the computer.
2. Immediately after the startup sound, press and hold both the Command (Apple) and "s" keys on your keyboard. The computer will display a series of text messages, at which time you may release these keys.
When the computer has started up, it will display a command line prompt (#). The computer is now in single-user mode.
How to Run the File System Check from the Command Line
Once you have reached a command line, follow these steps to use fsck:
1. At the prompt, type: fsck -fy (NOTE, there is a space between the k and the -)
The fsck utility will go through five "phases" and then return information about the disk's utilization and fragmentation. Once the check is finished, if no issue is found, you should see "** The volume <name of volume> appears to be OK."
If fsck alters, repairs, or fixes anything, it will display the message:
**** FILE SYSTEM WAS MODIFIED ***
IMPORTANT: If this message appears, repeat the "fsck -fy" command until this message no longer appears. It is not unusual for your computer to require several "passes" of fsck, because first-pass repairs may uncover additional errors. Run it until you get two consecutive times with an "OK" result.
3. When fsck reports that no problems were found, type: reboot
4. Press Return.
Hope this has been of some help. Good luck.
OT

My itunes will not burn cd. telling me new burning software added may cause this

I recently had Windows Vista put on my computer. I had Roxio put on it also. I tunes will not burn my playlist because of this. I have tried uninstalling and re-installing itunes . this does not correct the problem. I tuunes is telling me there is no disc burner found.

Hello bacovino,
From what you describe it sounds like you are getting this error message when trying to burn a CD in iTunes even after uninstalling the iTunes application:
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I recommend uninstalling not only iTunes but its associated softwares as well, as outlined in the following article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/ts3299
iTunes installs a device filter which helps it work with your optical drive. If this device filter is missing, you will see the message mentioned above. To resolve this issue, follow the steps below to reinstall iTunes and put the device filter back in place:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista, Windows 7, or Windows 8
If the issue persists after re installing iTunes again, there is additional troubleshooting in the article that involves installing the device filter in Windows, which it walks you through.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Itunes will not allow me to change the installation drive...

I have a PC with a hard drive that previously was partitioned into C: and D: segments. I have since removed the D: partition. itunes thinks it is still installed on the D: segment and keeps trying to perform downloaded updates there. My current D: drive is now a DVD ROM. When trying to install itunes updates, it will not allow me to change the destination. When I try to change it, I get the message "The volume D: is currently unavailable. Please select another." Then it gives me the "Finish" screen and doesn't allow me the option of changing the drive. SO... I tried uninstalling itunes. itunes will not allow me to uninstall it either. Please help.

Even though you're getting a slightly different error message, I'd try the following user tip:
"Invalid drive X:\" install errors

IDVD will not burn disc after QT update

IDVd used to work just fine. I did software update and updated Quicktime to version 7. I found that my Quicktime Pro key for QT 6 would not work with QT 7. I called Apple support and they told me how to revert back to QT 6. I followed their steps and successfully have QT Pro 6 back, but not my iDVD projects will not burn. It gets to stage 4 multiplex and burn and spins for hours. When I hit cancel, the disc ejects and is unburnt.
I have followed Apples steps to solve a no burn when you upgrade to iDVD 4.0.1 (remove encoded assets) and this does not fix the problem.

Hi Dennis
There is ways to delete all of QT and then make a clean install but the
easiest way is to download a back to QT 6.5.2 file from Apple support
and downloads.
I've done this and keep it till I get an upgrade that takes away the old
files before installing the new ones.
Yours Bengt W

ITunes will not play videos after 10.7.0.21 upgrade.

This morning I received a pop-up that a new version of itunes was available...blah, blah, blah...I agreed and upgraded. Since then videos will not play. It starts, the viewer comes up, a black screen then itunes crashes and it's back to the desktop. The videos worked fine before the upgrade and I have uninstalled and reinstalled itunes. What to do now?

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

After update itunes freezes will not burn playlist to disc

After I updated to the latest itunes, I cannot burn a playlist to a cd: message is Disc drive or software not found then itunes freezes up so I have to force close and start over. Any one else have this problem? Any ideas on how to fix?

after update mine now freezes when i switch to miniplayer, download apps, halfway though a song. in short it's unusable.
hope i can find a way to do a roll-back.

Itunes will not burn the order I want.

details: (a) itunes 10 (b) 2011 13'' macbook pro (c) not a noob
1) create playlist folder in itunes.
2) add songs to folder.
3) put songs in desired order.
4) burn playlist to cd.
5) playback cd and discover order is incorrect.
6) look on internet for help - hours later, discover there is none.
7) bust cd in rage - vacuum up shards.
8) start looking for alternatives to itunes.
mood: dispondent

In step 5, did you play the CD in your computer or in a CD player? If you play in your computer, it will play in the order selected by the highlighted column in list view. I invested a CD and 10 minutes to show you this.
Here is the paylist sorted by track number.
Here is the CD as it first appears in iTunes after burning. Notice that it is sorted by album. I didn't yet select a sort column but it appeared sorted by album with the album column checked.
Here is the CD sorted by track number.
Here is the CD opened in Finder. Note the track numbers correspond to the burn playlist. This is the order they will play in a CD player.
Next time, try playing in in your CD player before resorting to steps 7 and 8.

ITunes will not burn playlists after loading the ION USB Turntable software

Similar Messages

Maybe you are looking for