ITunes will not install because VB Script is not installed or enabled-help

Where do I find VB Script or where do I look to enable VB Script. And if anyone has had his error message, will the VB Script solve my problem

First of all, be sure you have downloaded the itunes or safari installer into an easy access folder, i.e. "C

Similar Messages

Purchased a song from iTunes, i tried to transfer it to my itouch, but i received an error "iTunes could not copy because the file could not be converted". how do i convert the song (well, i thought it will automatically be converted)?

purchased a song from iTunes, i tried to transfer it to my itouch, but i received an error "iTunes could not copy because the file could not be converted". how do i convert the song (well, i thought it will automatically be converted)?

Problem Fixed:
Remove the song from your itunes library, then go to the itunes store and try to download it again. It will say something like "this song has already been purchased, would you like to download it again for free?". Click yes, and it will download again. This worked for me, hope it helped

New Itunes is not working because my imac is 10.6.8 need help ?

New Itunes is not working because my imac is 10.6.8 need help ....

Because you require Lion to run it. You should not have installed it.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
             Identifier 5,1 or later.
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
         7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Itunes could not sync because a connection could not be established to the Iphone

I have been trying to sync my 4s and I keep getting "Itunes could not sync because a connection could not be established to the Iphone"

I am also getting this error with two iPad 2s and an iPhone 5. All are on iOS 6.0.1 and this is with iTunes 11 on a Windows 7 PC. I also have an iPhone 4 that does not seem to have an issue that I can tell. When I plug in the iPhone 5 and one of the iPads, it will start to to sync and right at the end I get that message. It will, however, still continue to sync the device after the error message pops up. With the one iPad, which is rarely connected to computer, it will find the iPad via wifi when iTunes is opened, but I will get that message when it is performing its initial sync.
While I kept having sync issues when using iTunes 10.7, this is a new issue for me. I was also getting a lot of warnings that the iPhone or iPad could not be synced because the connection was lost even though the iPad and iPhone were connected via USB cable. In those cases, the sync would just abort. I have not gotten that error though in two days. At the time to resolve that issue, I needed to disconnect the USB cable, reset the iPhone/iPad, and then reconnect the USB cable.
I really wish Apple would figure out these sync issues.
- Merg

Itunes could not copy because the file could not be converted

So I just bought two songs from Itunes...but they won't sync to my iphone and an error message keeps coming up. It just says "Itunes could not copy because the file could not be converted" I just paid money for the songs though...so I would really really like to get them on my phone...any suggestions??

Problem Fixed:
Remove the song from your itunes library, then go to the itunes store and try to download it again. It will say something like "this song has already been purchased, would you like to download it again for free?". Click yes, and it will download again. This worked for me, hope it helped

IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more

IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately. IMEI 013311005943507. Help please! the official service Moscow representation FDA ipad offer to send in the U.S. for $ 500!

Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.

[svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

Revision: 16929
Revision: 16929
Author:   [email protected]
Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
Log Message:
Add a class that will register the required class aliases in the event the mxml compiler generation [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
Add a reference to this class in the RPCClasses file so it always gets loaded.
QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
Bugs: Watson bug 2638788
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

Great exercise to document the problem like this. It got me thinking about how an app with modules would be different from an app that does not use modules. Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked. I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

The driver cannot be installed because it is either not digitally signed or not signed in the approp

I lost my drivers to my HP deskjet f2179 Printer and when i try to download them from the HP site the process goes
through to about step 5. It then stops and the following message pops up
" The driver cannot be installed because it is either not digitally signed or not signed in the appropriate manner." Is there a way to get around this problem , i do like this printer and would like to keep it if i can. Thank you

Coming up on 10 months and over 300 views without even a reply. Seems to have stopped everyone dead in their tracks.
I'm having this issue currently with an All-In-One after attempting to install a major software update.
Did you ever determine what this issue is, and the workaraound?

Albums can not play because original files can not be found

Suddenly about half of my albums in iTunes will not play. Error message says tunes will not play because original files can not be found. The other albums still play fine.

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool have moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you might be able to reconnect iTunes to them using my FindTracks script.
tt2

I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Error Message: "Skype can not start because the system is not available"

Try to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Okay!
I'm newbie here, but it doesn't matter. I dont want to do here anything else, just write off my opinion about the Microsoft's "new" Skype, and I hope they will read...
This is a cropped image - of course hungarian, because I'm hungarian, but I think many of us could see this as well. How this is possible? "The Skype can not start because the system is not available" *** What kind of system? The Skype was on a P2P system, where is impossible that the system is not available! This is why the skype was much better than the Microsoft's messenger. Then they bought it, and make it wrong...
I found a solution for this problem, this can happen if my client is not updated. But IT IS!
How does it works? Can we use the **bleep** Skype how we would like to use? Or this time we need to find an other application (like Viber), and using that while they not buying that as well, just because that is better?
Edited to conform with the Community Guidelines
Subject/title edited to better reflect post content.

While updating to ios7 there was an error and it did not restore my phone, now when i try to restore i get a message i tunes could not restore because back up could not be saved

I was updating my phone to ios7 and due to the lead being pulled it failed during restore, it has ios7 on the phone but everytime i try to restore it so all my pics, apps, music etc is on the phone i get the error message itunes could not restore because back up could not be saved. please help, im using windows xp

Hello agardner37701,
I found some steps you can take when your iPhone is not recognized by iTunes when in Recovery Mode. I recommend reviewing the steps in the section titled "If the device is not recognized while in Recovery Mode" under step 5 in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

Item not created because service agent AG not in reference document

While creating Shipment cost document through VI01 for inbound transportation getting the following error 'Item not created because service agent AG not in reference document '. PLease advice how to resolve this
Regards
Somnath Das

Hi,
Please Refer the following link...it will solve your issue....
VI01 - Item not created because service agent AG not in reference document
Regards,
Udaya.

Could not save because write access was not granted.

Hi
I use lightroom 4 whit photoshop CS6 when I send any file from my NAS server whit LR4 to PS6 when I want save it take "Could not save because write access was not granted" .
But I didn't have this problem whit LR3.6 and PS5.
I use mac os x 10.7.4

This always happens to me on the NAS on LR3 and LR4. If the file is local, no problem. But on the NAS it has issues with permissions. For me it says the file is in use and can't be overwritten. I'm trying a new drive today with a differnet filesystem (HFS+). Maybe that will work better.

VI01 - Item not created because service agent AG not in reference document

Hello Experts,
While creating Shipping Cost Document (VI01) no line items are getting created. And I am getting Log Message as mentioned below.
Log Generated : "Item not created because service agent AG not in reference document"
In reference document Service Agent is already there..
Any inputs???
Thanks in Advance..
Regards,
HP

Hi,
If you go to VT02N and in the lower part of the screen you have several tabs. If you go to the tab stages you should see 1 or more stages. In this stage there should also be a forwarding agent.
It could also be that you're not able to create a costing document because the status does not allow it. You can check in SPRO/LOG EX/ Transportation/ Shipmpent costs/ Shipment cost document / Shipment cost types and item categories/ double click on shipment type and you will see what status a shipment must have in order to create a costing document.
However, I expect that that is ok, else the error message would have been different.
MdZ

ITunes will not install because VB Script is not installed or enabled-help

Similar Messages

Maybe you are looking for