ITunes will not install correctly on my PC with Windows 8.  Any hints?

iTunes will not install correctly on my PC with Windows 8.  Any hints?
The error message reads:
iTunes.exe - Entry Point Not Found
The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in ghe dynamic link library C:\Program Filess(x86)\iTunes\iTunes.dll.

See this User Tip by turingtest2
Troubleshooting issues with iTunes for Windows updates

Similar Messages

  • HT1349 itune will not install correctly on my PC  Error message reads "service 'apple mobile device' failed to start

    itune will not install correctly on my PC  Error message reads "service 'apple mobile device' failed to start

    Hello cynthialane,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best of luck,
    Mario

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • Itunes will not install correctly  Error 7 Windows error 126 Problem is MSVCR 80 not found

    Itunes will not install I get a error message  ERROR 7 Windows error 126  When I try to open Itunes  MSVCR80 Not found

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Itunes will not install correctly on my laptop, how do i solve this problem?

    When I try to download iTunes on to my laptop I end up with the following message:
    iTunes has not installed correctly.  Please reinstall the programme.
    Error 7 usually appears as well.
    I need help!
    CH

    A complete uninstall/reinstall of iTunes and related software components is worth a try (7s can indicate trouble with other software components like Apple Application Support). See the following documents for instructions:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    ... But if no joy there, let's check to see if there's a .NET issue underlying this:
    iTunes for Windows: "Error 7" message when opening iTunes

  • ITunes will not install correctly. error7 windows126

    I have reinstalled apple itunes 5 times yesterday and nothing. It will not install without saying MSVCR80.dll is missing. Error7 (windows126) I ran a check and my computer has no missing or corrupt flies.
    What next?

    See this User Tip by turingtest2
    Troubleshooting issues with iTunes for Windows updates

  • Itunes will not install correctly

    My itunes nwill not open on my pc. It says window error 7error 127. When i try to reinstall. It doesnt work.

    Hey there veryorange1,
    It sounds like you are unable to re install iTunes but it will not successfully install. I would recommend the troublehsooting steps in the following article to help get iTunes back onto your computer.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • ITunes will not install correctly, How can i fix this?

    I just got a new computer and want to install iTunes.  It says im able to download the 64bit for a windows 7 i believe but everytime i try to install it, it just says a public file could not be located or something like that.  I have no idea what that means and clueless of what to do.  Anyone know how to fix this problem?

    Hello, carol17. 
    Thank you for visiting Apple Support Communities. 
    I would need a little more information regarding the exact issue and error your are receiving when attempting to install iTunes.  However, here is an article that may help with this issue. 
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • Latest update of itunes will not install correctly - January 31, 2014

    I just tried to download and install the latest edition (update) of itunes.  I am getting this error message R6034 an application has made an attempt to load the C runtime library incorrectly, please contact the application support team for information. Fixes?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99283)

  • New iTunes will not install there is a problem with the GEARAspiWDM driver

    THe message says exactly this:
    "Unable to install the GEAR driver set at this time. THe GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run iTunes again."
    Ive rebooted about four times and it hasnt helped. What should I do??

    With that one, let's try getting an installer log to the Apple engineers for a look.
    1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
    2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
    3. Type in a space, then the following line:
    /l*v C:\log.txt
    4. Hit return.
    5. The installer will create a log file:
    C:\log.txt
    Find that file and send it as an attachment to this email address: [email protected]
    in the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • Itunes was not installed correctly, please reinstall error 7(windows error 5) ?

    I have already reinstalled itunes 3 times.

    Anybody want to buy an Ipad2?  I cannot put up with this kind of lack of support where iTunes is useless, making my iPad almost as useless.  Who is minding the store at Apple for support these days?

  • TS3694 itunes will not install on my laptop any more. The latest update seems incompatible with Windows Vista.

    The latest iTunes update will not install on my HP laptop with Windows Vista. There is a Microsoft Visual C++ runtime error message and it will not load or set p.

    I reinstall Quicktime and it would not launch and gave me the same error messages.
    We'd better check to see if some other application has stashed old versions of QuickTime componentry down in your system files.
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit version of Windows, open the "System32" folder.
    If you have a 64-bit version of Windows, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall I tried 3x and still will not. Now I get msg it can not start because MSVCR80.dll is missing reinstall to fix??

    I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall. I tried 3x and still will not. Now I get a message it can not start because MSVCR80.dll is missing reinstall to fix??

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • TS3212 im trying to reinstall but will not allow, due to an error 7,  itunes helper not installed correctly,i have tried several times, but will not allow me to install, i have used itunes for years but now cant use it, can you help

    i have tried to reinstall itunes because it is saying i cant use my itunes due to an error 7, itunes helper not installed correctly, please reinstall, i have tried several times but still not allowing me to use, ive never had this problem before in all the years i have used itunes, i have gone through all the troubleshooting but still no access, can you help

    Many thanks.
    That suggests that another application has stashed old QuickTime componentry in your system files.
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit version of Windows, open the "System32" folder.
    If you have a 64-bit version of Windows, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services. and 'iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 193)

    Hi!
    So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same  "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
    Tings I have done:
    - Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
    - Attached iPod before iTunes install and updated drivers.
    - Installed iTunes as 'Run as administrator'
    - Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
    Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
    tt2

Maybe you are looking for

  • Access NAST table immediately after creation of sales order (va01)

    Hi All, I want to access the nast data for the newly created sales order from va01. I tried to use program exits: userexit_save_document and userexit_save_documnr_prepare and plu the BADI BADI_SD_V46H0001 method EXIT_SAPLV46H_003. the breakpoint is n

  • Regarding quantity field...value in layout

    Hi All, my issue is here i am passing vbrp-fkimg value to layout.. the value in the field above is 100.000, but here in the layout it is coming as 100 and printing it. how the value of 100.000 become 100. any settings, configuaration are there which

  • Remove the qty form reservation column in stock overview

    Hi, we have created production order for a finish material, for that semi finish material is reserved. but we don't want to proceed the production order further. i need to remove the qty from the reservation column of semifinish. is it possible to do

  • Admin account doesn't have admin permission

    I have only one user account set up in my computer. It is described in the accounts listing as Admin. But I don't seem to able to make changes I need to make. I'm trying to use an external hard drive and it's been automatically locked as Read Only. I

  • Webdynpro exceuting problame`

    when i develop small webdynpro java application, when run from that application giving this error message please help me http://172.17.3.70:50000/webdynpro/dispatcher/local/hrpersonclaims/ClaimsApp? Access control configuration prevents your request