ITunes will not launch on W2K

I've searched and read previous replies. Here's my specifics:
On Win2K PC, trying to launch iTunes, task manager shows iTunes.exe, and perhaps 15 seconds later it disappears and iTunes does not launch.
There are no error messages.
Uninstalled iTunes, downloaded latest version and reinstalled, same problem.
QuickTime Pro launches no problem.
I don't have any Norton Software. I do have McAfee VirusScan.
I downloaded and ran Ewido. It found some Adware. If I try the full system scan, Ewido quits partway through, with no error message. If I do any of the subscans, it can complete them.
I downloaded AdAware SE and ran that no problem. It also found some Adware and removed it. Restarting and subsequent scans come up clean.
Still no change with iTunes. iTunes.exe shows up in Task Manager, and about 15 seconds later disappears. No error messages. QuickTime launches no problem.
help
-Mark

I think I have this isolated, and wanted to write back to share the info. I installed a clean hard drive and did a clean install of Win2K (happens to be W2K Server), performed current updates, then installed the latest iTunes and got the same result. I uninstalled iTunes and tried the last version 5.x iTunes with the same result, I uninstalled iTunes and tried the last version 4.x iTunes with the same result.
Here's my amazing conclusion: User error, the computer hardware doesn't meet the System Requirements of iTunes. iTunes System Requirements says it requires a minimum 500 MHz Pentium, and this computer is running a P233MMX. I'd generally expect a more graceful user experience, such as iTunes not installing and a dialog.
I know that a 1998 motherboard in a PC is ancient in computer terms. Despite this board being equipped with the maximum capable and speed processor and max RAM at 256 MB, it is ancient and obsolete by current standards. No, I'm not a luddite, I have plenty of modern computers, but keep this one because despite its age it runs various server features that I use just fine. This was more of an experiment to see if iTunes would run on in anyway. I'm a little bit surprised, as the hardware runs plenty of applications that are more computing intensive than iTunes, and it doesn't require much computing power to play music, but for whatever reasons, iTunes system requirements are in fact plainly stated, and this particular computer doesn't meet them.
I'd be very interested in hearing if anyone with a sub-500MHz PC running W2K can successfully run iTunes, but I suspect there aren't any.
Again, this was merely an experiment and I think it is simply the defacto behavior for iTunes to not launch if you try to run it on less-than-required hardware. And this is merely one of seven computers in the house, I'll just run iTunes on one of the newer systems. Thanks for the input, hope I didn't waste anyone's time.
-Mark

Similar Messages

  • Itunes will not launch on Windows Vista no error code

    Itunes will not launch on my computer. I have windows vista. I have uninstalled and downloaded itunes repeatedly. I have also tried all of the troubleshooting tips available on the apple support site. But none of them worked. Quicktimes works fine. It is just itunes. I even opened up task manager to check the processes and itunes appears for about a second in the processes tab then just disappears. I have no idea what to do i have an iphone 3gs and havent updated it for a few months now and cannot sync my iphone without itunes. I Have kaspersky internet protection but i doubt thats the problem because itunes was working fine until i updated it.PLEASE HELPPPPPP!

    Presumably the configuration fails to complete, so every time you start iTunes it has another go.
    As iTunes works normally when you plug in your iPod, you should be able to work round this by creating a new iTunes short cut.
    Go to Program Files\iTunes and right click on iTunes.exe. Select: Send to>>Desktop(create shortcut). If you are lucky you will be able to open iTunes using this short cut.
    However this work around does not fix the underlying problem that WIndows fails to complete configuring iTunes.

  • TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    I'm having a very similar issue, paired with iTunes not being able to get online.
    iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
    Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.    

  • Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)

    Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)
    Yeah

    OK, so i cannot enter into iTunes safe mode, whilst monitoring proccesses in the task manager I noticed that itunes will only stay open if i keep my fingers on shift and control-i dont know if that is worth mentioning- the proccess promptly ends after the release of the said keys, (I tried both the shift control keys on either side of the keyboard-same result) so i am stuck there.
    P.S.
    This version of iTunes had previously worked before, I uninstalled everything apple related after noticing how many processes (-id est-) /applications, were using up my memory.
    afterwards I had need for iTunes, (i needed to wipe my iDevice) I reinstalled and this problem has arisen.

  • HT2589 itunes will not launch on my pc

    My itunes will not launch from my pc. Have repaired it, uninstalled and reinstalled and it still will not open. Have a mini player icon on the task bar that is unresponsive also. Help please.

    Hello, fledens. 
    Thank you for the question.  Try the steps in the article below as they may help you resolve the issue that you are experiencing with iTunes becoming unresponsive or failing to launch.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Jason H.

  • Itunes will not launch, it shows  message of "itunes library .itl" can not be read because it was created by a newer version of itunes. I tried opene it in save mode but I had the same problem.

    Itunes will not launch, it shows  message of "itunes library .itl" can not be read because it was created by a newer version of itunes. I tried opene it in save mode but I had the same problem.

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • TS1386 itunes will not launch in XP because: "itunes library.lit cannot be read because it was created by a newer version of itunes"

    itunes will not launch in XP because: "itunes library.itl.cannot be read because it was created by a newer version of itunes"
    Is this an apple problem or a computer problem? If I reinstall itunes will my library still be there?

    Uninstall and reinstall the Apple software.  See the following.  That link also has a link for Win7 and Vista.
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • ITunes will not launch after upgrade--click, bounce bounce, nada

    iTunes will not launch after upgrade--rebooted nothing--2 bounce icon
    then shut down all and unplugged, restarted--no change, iTunes still will not launch after upgrade
    iTunes current version
    on imac w/10.6.8

    I have the same issue.
    Allready uninstalled iTunes and reinstalled it, but the same problem occurs.
    Icon keeps bouncing, and all that's visible is the first menu-item in the top menu bar, named iTunes. Nothing is clickable though.
    The iPhone Configuration Utility doesn't seem to work either, it crashes on uploading an app to my iPhone. I guess it's using some of iTunes' libs or something.
    Does anyone know how to get iTunes working again? I'm getting pretty desperate over here...
    Thanks!

  • ITunes will not Launch 10.6 Snow Leopard

    I just upgraded to 10.6 last night and now my iTunes will not launch. I removed all my extra plugins and am trying to start fresh. Here's the error message that pops up in the Console:
    8/29/09 10:26:15 AM [0x0-0xbddbdd].com.apple.iTunes[9902] [Deprecated] CocoaJava: com.apple.cocoa.foundation.NSRuntime
    8/29/09 10:26:15 AM [0x0-0xbddbdd].com.apple.iTunes[9902] -[NSJavaVirtualMachine initWithClassPath:] FATAL: cannot initialize ObjCJava. Exit
    8/29/09 10:26:15 AM com.apple.launchd.peruser.501[237] ([0x0-0xbddbdd].com.apple.iTunes[9902]) Exited with exit code: 255
    Any ideas?

    OK, this solution worked for me:
    Quit all programs, force-quit iTunes if it is locked up.
    Disconnect any iPhone or iPods
    Go to: Macintosh HD/users/"your user name"/library/preferences, and drag to trash the preference panels: with itunes in the name: including>com.apple.iTunes.plist, com.apple.iTunes.eq.plist
    Download iTunes 8.2.1 from theApple website,
    Run the iTunes 8.2.1 installer
    It will have you set up iTunes as if for the first time.
    Launch iTunes after it is set up, it will take a bit as it creates new prefence files.
    Quit iTunes>restart the mac>Launch iTunes and after it loads plug in your iPod or iPhone.

  • TS1717 Since the upgrade to version 11 ITunes will not launch I'm running Windows 7

    Since upgrading to version 11 ITunes will not launch I have removed and reloaded again but it still will not launch.

    I was having the same problem.  I went into Control Panel and repaired quicktime, and now i am able to open itunes.  hope this works for you!

  • Yosemite working but iTunes will not launch

    Finally got Yosemite running OK on my MBP even though I could not redownload it from the App Store.  iTunes has not been working through this whole ordeal so that is not surprising (I thought).  But I just did a complete download of the Yosemite Installer so they must be separate.  iTunes will not launch.  The icon is in the Dock and it will bounce three times when I click it but it won't launch/open.   Can this be fixed by launching the Yosemite Install app now in my Application folder?  I haven't found a way to download/reinstall iTunes separately.  I had/have iTunes 12.0.1.

    I have had this problem, I even went into package contents to Macos folder, ane when I launched from there, it seems that Itunes is not conecting to a server, and hence times out with the spinning wheel of death so no matter how many tiles i uninstall and re install, it keeps coming back to this?
    Gordon

  • SW upgrade wiped out my iTunes library and also now iTunes will not launch

    I just completed the recommended Sw upgrade for iTunes and now iTunes will not launch and my iTunes library is TOTALLY EMPTY.
    Clearly, I am NOT A HAPPY CAMPER. I have lost a substantial investment of $$ and time in losing my iTunes library - so Apple should be paying me for my loss.
    I need help, can you, will you help me?  I want my iTunes library back and I'd like to reinstall the previous version of iTunes, because it worked fine.
    Barbara Bowen
    Apple, 1983-1993

    You don't say which versions so we don't know to which version you wish to revert.  Reverting won't get back your library anyway, if it is truly gone.
    Have you checked if your library is truly gone?  Have you looked in the iTunes folder and the media folder inside of it?  The library has two main components, all the media files for the individual tracks and the iTunes Library.itl file which give them the structure you see in iTunes.  Sometimes iTunes just loses track of the library file which can be re-linked, and what's really important anyway are the media files.
    If the library is truly gone you can restore it from the backups you make of your computer.  Backups are a responsibility of any computer owner ever since computers were invented.  If you don't have backups then it may be possible to redownload items purchased from the iTunes Store.
    I know I have glossed over some of this but it's not worth going into details on how to do all the different things until we know precisely what it is that needs doing.

  • Itunes will not launch after latest update 2/2014

    Just installed latest update for iTunes on 2/21/2014 on my MBP running snow leopard and after restarting MBP iTunes will not  launch.
    Thank you
    MacBook Pro
    Late 2008 unibody running Snow Leopard 10.6.8

    Yes, first, I would run Disc Utility; Verify Disc, Verify Disc Permissions, & Repair Disc Permissions.
    Then I would go here > http://www.apple.com/itunes/download/ for the .dmg file download.
    Then I would reinstall iTunes. So, unless you do not have enough free space on your hard drive, that should work.
    Otherwise, it may be time for some spring cleaning...
    Regards,
    mm~

  • ITunes will not launch on Win 7 32-bit

    It was working fine a week and a half ago when I used it last, but now iTunes will not launch. It just shows up in the task manager Processes tab and nothing in the Applications tab. I have followed the instructions provided here:
    http://support.apple.com/kb/TS1717
    and still nothing. I have also done a complete uninstall/reinstall of iTunes and Quicktime. I am pretty much at the end of my rope and I am hoping someone has a suggestion that works.

    We could try renaming the APSDaemon.exe file.
    In Computer, open Local Disk C:\ or whichever drive your program files are installed on.
    On a 32-bit version of Windows 7, open the "Program Files" folder.
    On a 64-bit version of Windows 7, open the "Program Files (x86)" folder.
    Open the "Common Files" folder.
    Open the "Apple" folder.
    Open the "Apple Application Support" folder.
    Rename the APSDaemon.exe file APSDaemonDISABLED (or something like that).
    Does that stop the iTunes issue?

  • I just down-loaded your latest iTunes up-grade and now iTunes will not launch

    I just down-loaded the most current iTunes upgrade, and now iTunes will not launch. I ran my computer diagnostics and it indicated that the program was incompatable. What should I do from here?

    This page has some troubleshooting for problems when updating/restoring the iPad : http://support.apple.com/kb/ht4097

Maybe you are looking for

  • How to lock a form (all fields read only) using a button (JavaScript)

    Hi guys, I have a form with several input fields, check boxes. Using a button in the form, I would like to lock it using a JavaScript. Locking means in my case that all input fields, checkboxes, etc. are read only (cannot be changed anymore). I alrea

  • Any word on GT80 Titan release?

    I'm really curious to know approximately when the GT80 Titan will be released. Is there any information on this? Google search only came up with websites announcements back in October predicting it would be released near the end of 2014, last year. S

  • Removing Non-Breaking Spaces En Masse

    A bunch of text I copied into a pages document is littered with lots and lots of non-breaking spaces (^ with a dot underneath it, showing up as an invisible). Does anyone know of a way to select the affected text and convert the non-breaking spaces i

  • ACS 2.4 migration to 3.x?

    Hello, Has anyone migrated from ACS 2.4 to 3.x? If not, how else can you one get data from that version into the next? thanks!

  • Removeable Anti-Glare screen for new iPad?

    To clarify, I am looking for something that is meant to be taken off and on. For those infrequent ocassions when I'm outside or in a very high light environment and want to read.  I do not want something that applies like a screen protector. I alread