ITunes will not load my entire library

I did a lot of editing of my music folder without the use of iTunes. In order to make my library appear the way I wanted it on iTunes, I cleared the iTunes library (without deleting the files), and then tried to add the entire iTunes Music folder back into the library. It had worked for me several times before, but this time it didn't. iTunes will only load a fraction of my library and quit. Is there anything else I can do to get all my music back into my library without having to click every folder and adding individually? Thank you for your time and help.

I have the same problem!!! I formatted my hard drive after exporting my library to a DVD (very easy). Now I want to put all 1564 songs back and it brings in only a fraction. I first tried with the total amount to get 716, then with 800 to get only 207, then with 100 to get 37. I have the copy to folder thing checked but the add file to library doesn't work either. Why is it such a payne to put the songs back! It should be just as easy as backing them up! v6.0.1

Similar Messages

  • Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

    Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

    Hi Keen itunes User,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • ITunes will not load certain mp3s into my library

    all of the music i have has been tested as working mp3s both on and off the computer; i had a zune for about a year til a rainstorm destroyed it, and the song collection i have plays just as well through winamp/zune/wmp as it did on the zune. however, itunes will not load songs into the library and doesn't give any sort of error or message about it. my primary example is the three bloodhound gang albums i have, only one (one fierce beer coaster) will load in itunes whereas the others (hefty fine and hooray for boobies) don't show up, regardless of adding songs individually, adding folders, or drag+dropping from explorer. any ideas why itunes is hatin on my music?

    i can't seem to find a "itunes music library.itms" file, or indeed any .itms file in the program files folder for itunes. currently there is no music in my itunes library; i removed it all to try directly dragging files from explorer to the music section of my ipod, which still results in files not loading/synching. after it finishes i'll put files into the library and see if it creates such a file

  • Itunes will not load library because it a newer version

    itunes will not load library because its a newer version

    Hi highliner22,
    Thanks for using Apple Support Communities.  This article has steps to take to recreate your iTunes library that may help:
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    Cheers,
    - Ari

  • I converted a heap of music using 'switch', when i try and add this music to library iTunes will not load it??

    i converted a heap of music using 'switch', now when i try and add this to library itunes will not load???

    Unless the MUST be AAC, try FreeWMAtoMP3Changer: http://www.wma-mp3.com/free-wma-to-mp3-converter/
    The ONLY caveat with it is: You CAN'T drag & drop files on it to open them. You MUST use the browse function to select them. If you drag and drop, it multiplies the output files. A 10 track album will produce 45 converted files.

  • Itunes will not load

    hi- i have tried to install the updated version of itunes- but i guess i deleted the "music folder" from my computer- and therefore itunes will not load- how can i put back "my music" folder- where should i put it- so that i can load itunes- thanks-

    Next time you try to launch iTunes, do a "Choose library" as per the following document:
    [Using multiple iTunes libraries|http://docs.info.apple.com/article.html?path=iTunesWin/9.0/en/15502.h tml]
    Now where "username" is the name of your XP User account, browse to:
    C:\Documents and Settings\username\My Documents\My Music\iTunes\
    Can you see your library in there? If so, and you select it, does your normal iTunes library come up?
    Message was edited by: b noir

  • Itunes will not load, someone please help!?

    i have read all the forums, and nothing is working for the technical help that I need, itunes will not load or work and no matter what help I am trying to seek, nothing is working. I have tried uninstalling, reinstalling, everything that people are advising but nothing seems to work. Basically each time I try to click on itunes to load, the timer appears but nothing else. I have just replaced my iphone and I cant get it to sync with my itunes so basically i cant use my phone either, please help anyone?! thanks, terri!

    I believe the files need to be in MPEG-4 format. Or that is what I am converting my movies in and it works fine.
    Movies you download off of iTunes are in M4V format, which is probably Apples MPEG-4 format name.

  • IPhoto will not load the iPhoto library.  When I select "show all windows" the library does appear but cannot open it.  I am on version 8.1.2 and using Maverick.

    iPhoto will not load the iPhoto library.  When I select "show all windows" the library does appear but cannot open it.  I am on version 8.1.2 and using Maverick.

    I was able to get it fixed. I had received some responses and they had me
    recreate the library I believe.  It's been a while so I cant remember
    exactly what I did. I have since upgraded to the latest i photo version and
    have had no problems with it.
    Brian
    On Friday, November 7, 2014, Apple Support Communities Updates <

  • I have an ipod touch 5th gen. i first loaded itunes on a windows 7 64 bit machine. i then got a new windows 8 64 bit machine but itunes will not load on it. i keep getting 2503

    i have an ipod touch 5th gen. i first loaded itunes on a windows 7 64 bit machine. i then got a new windows 8 64 bit machine but itunes will not load on it. i keep getting 2503 & 2502 errors. some apple software loaded, but it will not let me uninstall it from the machine. any thoughts, about how to get itunes to run on my machine?

    Try:
    Trouble installing iTunes or QuickTime for Windows
    Next try posting in the iTunes forum

  • Itunes will not load on my ipad. Icon is there. When I open "Music", it shows itunes with no content briefly and then takes me back to home page. What to do?

    itunes will not load on my ipad. Icon is there. When I open "Music", it shows itunes with no content briefly and then takes me back to home page. What to do?

    Quit the app and restart.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Itunes will not open, message says library was created with earlier version. what now?,

    itunes will not open, message says library was created with earlier version. what do i do?

    Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
    tt2

  • Itunes will not load all photos

    Suddenly, my Ipad 3 will not load all of the photos that are in a folder onto the iPad into an album.  I have a folder of 58 images and iTunes recognizes that.  When I sync to add the images, itunes loads only 53 of them.  I have repeatedly attempted to sync and it keeps loading the 53 images.  I took the 5 images from the folder and put them in a new folder and Itunes will not load them.  These images are JPEG's and are not any larger of a file than the ones that did load.  I have even restored my Ipad and it still only will load the 53 images.
    I had this same problem the other day where out of 96 images, it would only load 76.  I have plenty of HD space available.  I am at my wits end.  All software is up to date now and still same issues so not sure what the problem is.  I've deleted the iPod Cache folders, have a fresh install of ITunes and still no luck.  HELP!

    You removed the cache from iPhoto - correct?
    MJ

  • ITunes will not load in Vista.......

    I have installed and reinstalled the newest iTunes out there and my computer will not load iTunes. I get a message......"iTunes has stopped working." and it makes me close down, but iTunes never loads up. I have checked the help/support pages and have found nothing and I dont know what to do. I need new songs and I can't do nothing. I can charge but not edit my ipod or upload songs since iTunes will not load up.
    any suggestions?

    I'm having this exact same problem. All my iTunes software is up-to-date. I've tried downloading and re-installing several times. I'm not very impressed with the Apple support. Has anyone managed to resolve this issue?

  • HT1296 my iTunes will not load podcasts onto my iPhone.  Everything stays in the cloud for streaming!  HelP!

    my itunes will not load podcasts on my iphone for review later.  everything stays up in the cloud and wants to stream  I want to download the content to the iphone.  HELP!  Never had this problem before IOS 7

    Is the content in question selected to sync?

  • Movies on itunes will not load or load very slowly and freeze on my apple tv.

    Movies on itunes will not load or load very slowly and freeze on my apple tv. both the computer and apple tv are wired connections on my home network. Checked the network speed and it is between 0 and 1 ms response. This problem just started last week. Only new software introduced recently was update to Norton 360.
    Thanks

    I know very little about windows but security software is notorious for causing the type of problem you have, you may want to contact Symentec and ask them which settings you need to change.

Maybe you are looking for

  • SizeLimit exception; how to retrieve the all the records?

    Hi there! I'm trying to retrieve objects (users) from a node which has lots of entries. So, after getting several entries i receive javax.naming.SizeLimitExceededException: [LDAP: error code 4 - Sizelimit Exceeded]. So the question is: is it a server

  • Images in button not shown properly

    I have imported a quicktime file which was exported from FCP. The final cut portion is strictly jpeg files, no movies. I have made chapter markers in FCP. So in DVD Studio Pro, I created a button and chapter index, then selected a template. When I go

  • Zoom button to scale display object

    I am attempting to scale a current instance on the stage named siteMap_mc. The class below is attached to a "zoom icon" thru the library palette package { import flash.display.MovieClip; import flash.events.MouseEvent; import flash.display.Sprite; pu

  • Os9.0.4 upgrade to tiger 10.4

    hello please can anyone help me. I have just bought a G4 dual 450 running OS9.0.4 and I do not want this os at all. I have tiger on dvd and have tried installing but it doesn't work. I now know that I must first upgrade os9.04 to os9.2.2 but have sea

  • Object link

    Hello All experts, I have to attached the document in delivery & in maintenance order.But as per my knowledge these are not standard object in SAP.So these can do with screen exit can any one tell is there are any standard exit are available for that