Itunes will not open even after I reinstalled Quick time!!!  Help!

Okay, I have read lots of information on this site and did everything as instructed, but I am still having problems. I installed the new version of Itunes, then got a "audio configuration problem" message. So, I removed Quicktime and then re-installed Quicktime. I am still getting the same "audio configuration" message! I even tried repairing Itunes in the Add/Remove Programs folder....but it says that Itunes must have Quicktime in order to run. Well, I just reinstalled Quicktime but somehow it is not recognizing it!
What should I do now? Help!?!?! I want to use my new Ipod.
Tiffany
Gateway laptop   Windows XP  

I went to and had a copy of the QT/IPOD Installer & I-Tunes software copied to a CD. I loaded the disc using the .exe file and all came up and ran well. Best Buy's Geek squad provided me the files free of charge. I was frustrated for three days until the thought came to mind. I hope this helps.

Similar Messages

  • I updated my face book app on my iphone 4 and now it will not open, even after i rebooted the phone. help???

    I updated my facebok app after the app store said that it needed to be updated and ow the app wont load when I try to open it.  I have tried to install and reinstall the app and I have also rebooted the phone several times with no results

    try settings>general>reset>reset network settings, i mean this sounds like its a facebook issue its self and that you would have to wait for another update, they were probably getting prepped for ios 6 and somehow this one got out for an update, they are usually pretty good about getting updates out.

  • App will not open even after reinstallation

    How do I resolve this?  Reinstalled multiple times, tried shuttting iPad down, is it a settings issue??  Running iOS 5.1.1 still, is that the issue?

    I'm sorry to hear that you have trouble running
    PS Touch.  Please try to install via iTunes. This normaly helps.
    -Guido
    Am 02.02.2013 um 06:34 schrieb "seankelleher" <[email protected]<mailto:[email protected]>>:
    Re: App will not open even after reinstallation
    created by seankelleher<http://forums.adobe.com/people/seankelleher> in Adobe Photoshop Touch - View the full discussion<http://forums.adobe.com/message/5041972#5041972

  • My ipod will not open even after following instructions online

    my ipod will not open even after following instructions online

    Do you mean you can't unlock it?
    We have no way of knowing exactly which online instructions you may have tried.
    Apple - Support - iPod touch - iPod touch Troubleshooting Assistant
    iPod touch: Hardware troubleshooting

  • Safari will not open, even after reboot

    I have been having all sorts of problems with my iMac since installing Mavericks (Gmail integration was freezing everything, Maps just didn't work).
    The latest is that Safari just will not open, period. I have rebooted several times and even reinstalled OS X via the Cmd+R on reboot, nothing. It hangs upon opening and needs a Force Quit. When restarting again, it asks if you want to reopen windows and it makes no difference if you say Yes or No.
    Any ideas on what to do?

    Try deleting the com.apple.Safari.plist
    Quit the application.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
    Open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
    Thanks to leonie for some information contained in this.
    You might need to redo the View settings after an update.

  • MY ITUNES WILL NOT OPEN- I'VE TRIED JUST ABOUT EVERYTHING HELP ME PLEASE!!!

    I am so depressed and angry..My beloved Itunes is not opening. I get the error report: "itunes has encountered a problem and needs to shut down sorry for the inconvience"
    I've tried the misconfig option,uninstalling and reinstalling the itunes, rebooting, uninstalling and reinstalling quicktime, i did the delete temp option,just about everything I've tried- please to anyone who can help me, give me your solutions please I'm begging you- I never been so lost with out my ipod/itunes...
    ANything you guys know that may help is fine..I'm in need of help!!!!!!!!!!!!!!!!!!!!

    OK, I've been messin with this for about 4 hours now, I finally found the solution to my problem and would like to share in hopes of helping. Every time I tried to open itunes I recieved this error message:
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
    If you were in the middle of something, the information you were working on might be lost.
    Please tell microsoft about the problem.
    We have created an error report that you can send to us. We will treat this report as confidential and anonymous.
    <send error report> <don't send error reptort>
    I sent the error report ... and eventually got this link http://docs.info.apple.com/article.html?artnum=302372
    Which basically lays out my whole problem - and I did all of the suggested steps but still...
    same message... same problem... and no solution.
    I came to the mssg boards and tried all these suggested steps that are on this post to no avail. Reinstalled everything over and over. Then I found this:
    for itunes 6.0.x, the first thing i check for with one of those is a broken quicktime. does your quicktime currently launch, or does it give you an error message?
    try a careful standalone QT 7.0.3 reinstall.
    http://www.apple.com/quicktime/download/standalone.html
    I went and downloaded the standalone quicktime, installed it. Opened the quicktime program to make sure it worked, which it did, then tried itunes again.......
    WALLLA IT WORKS!!!! Finally
    hope this might help, good luck.

  • HT1491 My password in iTunes will not work, even after changing it. It keeps showing a window to add PW. I do and it pops up again.

    My PW in iTues will not work. Even after changing it. Window pops up and ask for PW. Over and over.

    I would be worried about that - but it may turn out to be nothing.
    Since you already changed your password, you're probably OK - but I recommend looking at your purchase history to see if there's any unauthorized purchases (use iTunes on your Mac or PC to go to the itunes store, then click your account in the upper-left or upper-right corner). If there are any new purchases that you didn't make, click the button to report problem (and if they happened after you reset your password, you should immediately change your password again).
    I think sometimes when you change your password and verifiy your credit card info, it can "reset" the warnings - so it may actually have been you logging in to your own account that caused you to get the warning. But I'm not absolutely sure of that, so it's best to check your purchase history (and reset your password if necessary - but you already did that).
    I also recommend turning on "two-step verification" (but Apple makes you wait a few days after changing your password to turn that on). With "two-step verification", Apple will send you a text message with a 4-digit code the 1st time you try to buy something from a new computer - since a hacker won't have your phone, they won't be able to continue (theoretically). After the 1st time, it goes back to mostly working normally (until the 1st time you  try to purchase from another new computer, then you get another text message - so this alerts you to someone, somewhere else, trying to get into your account).

  • Elements/Premier will not open, even after re-install

    I was unable to open Elements or Premier (V11) from the shortcuts on my Windows 7 (64) PC after years of use.  No related .exe file was found on a search of all drives.  I re-installed, and I have exactly the same problem.  How do I resolve this?

    Hi MontesShack,
    If iMovie will not launch or is not responding on your iMac, you may want to look at the troubleshooting done in this thread -
    iMovie is frozen: Apple Support Communities
    https://discussions.apple.com/thread/3640729
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Firefox will not open even after update or in safe mode using windows button + R

    Tried solitions given on site using IE. Firefox will not start at all, did latest update and tried safe mode start.
    Only get box stating it has encounterd a problem and crashed. I only use firefox and have so many bookmarks I really don't want to uninstall and start over.

    We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
    #Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
    #In that text field, enter %APPDATA% and press Enter. An explorer window should open.
    #From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
    #Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
    #Open the most recent 5 files with a text editor and copy the IDs.
    #Paste each ID with '''bp-''' into the reply window on the forums.
    Thanks in advance!
    You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

  • HT4946 My Ipad is plugged into the wall.  It is locked and telling me to backup to icloud.  The ipad will NOT unlock, even after I push ok.  Help!

    My ipad is plugged into the wall.  It is locked and telling me to backup to icloud.  I can not unlock it even after I press ok.  Do you have any advice?

    A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo reappears, release both buttons and await restart.

  • IPhoto will not open even after installation

    After importing some photo images from a CD and beginning to edit (red eyes) a few of them, *iPhoto hung up* with the spinning ball. So, I tried to close the application and even shut down the iMac without success. Eventually, I just shut down the iMac using the on/off switch in the back of the globe. After starting it up again, I tried to restart iPhoto without success. Now iPhoto just won't open up. I have tried the MacOS X disk utilities at least twice; and I have used DiskWarrior without impact. I have removed and reinstalled iPhoto 4.0.1 from the iLife disk three times unsuccessfully. At this stage every time I try to start iPhoto, the unpopulated iPhoto screen (no images shown) appears then seems to time out and quit. *I have a LaCie storage disk with pretty recent saves, including the iPhoto and its library.* But, when I tried to transfer that latest iPhoto copy to the iMac, it would not seem to work. Anyone have useful ideas for me?

    I've corrected one problem and generated another, I'm afraid. I could not seem to load the iPhoto files, even though the screen said it was loading. So, I followed a suggestion found on this forum to restart iPhoto and create a new photo library first, then drag the older photo library folder into that newer folder. It did not specify whether I should select all folder contents, copy, and drag into that new folder or merely to drag the old iPhoto Library folder inside the new one. I chose the latter. Once that happened, iPhoto restarted nicely but spent hours repairing the photo library. It seems to have corrected several image date problems I'd always noted, but now I'm left with the dilemma of deciding which photo library to use. I no longer have the albums within the iPhoto displays when I open iPhoto; and all images show they were made and imported today. In the previous process, another photo library emerged with a "-1" appended to it. Its contents seem to be correct, but when I specify for iPhoto to use that new photo library_1, the iPhoto contents appear to be empty. At this moment, I'm reloading the newest iPhoto Library-new using the select-all, copy, and drag the contents into it to see whether my albums will appear this time. Before I restart or do anything else which might jeopardize success, any suggestions?

  • IPhone will not open even after reinstallation

    After importing some photo images from a CD and beginning to edit (red eyes) a few of them, *the iPhone hung up* with the spinning ball. So, I tried to close the application and even shut down the iMac without success. Eventually, I just shut down the iMac using the on/off switch in the back of the globe. After starting it up again, I tried to restart iPhone without success. Now iPhone just won't open up. I have tried the MacOS X disk utilities at least twice; and I have used DiskWarrior without impact. I have removed and reinstalled iPhone 4.0.1 from the iLife disk three times unsuccessfully. At this stage every time I try to start iPhone, the unpopulated iPhone screen [no images shown] appears then seems to time out and quit. I have a LaCie storage disk with pretty recent saves, including the iPhone and its library. But, when I tried to transfer that latest iPhone copy to the iMac, it would not seem to work. Anyone have useful ideas for me?

    Operator error: meant to say iPhoto, not iPhone.

  • ITunes will not open up after the latest iTune update 12.01 on my iMac (late 2009)

    The latest iTunes 12.01 refuses to open on my iMac (late 2009) after installing Yosemite, but works OK on my Mac Mini (late 2012) also with Yosemite. help!

    Hi there 1302Scotty1944,
    You may want to try reinstalling iTunes as an initial troublshooting step. The article below has more information.
    Troubleshooting iTunes installation on Mac OS X
    -Griff W.

  • Firefox is running but will not open even after re-installing

    I have tried re-installing firefox but it still won't open. If I go onto task manager I can see that it is running in the background. I am currently using google chrome as my default browser.

    I have three computers that are practicably clones of each other and the new itunes update failed on two of them but one worrked fine. Here is fix that worked for me. This fix was suggested by another member but I cannot recall or find his post. My system is WinXP sp3 with all the latest patches.
    1. Download AirPort Utility 5.5.1 for Windows http://support.apple.com/downloads/
    2. Open task Manager and stop the mdnsresponder process. The corrupted mdnsresponder will be using 50% of your cpu.
    3. Open control panel / add remove programs. Find the bonjour app and click on it.
    4. Note the corrupted version of bonjour 2.0.0.34 by clicking on the support link.
    5. Uninstall bonjour
    6. Restart Windows.
    7. Install the AirPort Utility. This will install a good working version of mdnsresponder. Restart windows again.
    8. Upon restart you will see a new the airport icon in your task tray. You can also find mdnsresponder.exe running under process in task manger with little or no cpu usage. Your bonjour app under add remove panel will now be version 1.0.106

  • IPhoto will not open even after reload

    I have remove iPhoto and reloaded from disc. Still getting the same error message. I am basically pretty frustrated at this point, any ideas?
    Interval Since Last Report: 13374 sec
    Crashes Since Last Report: 8
    Per-App Crashes Since Last Report: 8
    Anonymous UUID: 41254D60-DDE4-4A37-A55C-DB4E70D14C3F
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/Framework s/iLifeSlideshowProducer.framework/Versions/A/iLifeSlideshowProducer
    Referenced from: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
    Reason: no suitable image found. Did find:
    /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/Framework s/iLifeSlideshowProducer.framework/Versions/A/iLifeSlideshowProducer:
    stat() failed with errno=5=

    I am at my wits end with iPhoto error messages and inability to reload it. It has worked fine until yesterday when I started getting the library not loaded error message. I deleted the app, removed the pkg files from HD/Library/Receipts and reloaded the app from my iLife CD as suggested. I have done this 6 times without success and continue to receive the same error message. During reinstall it runs for a long time saying loading packages. After reload there are no new pkg files in teh HD/Library/Receipts location. I do not know what to do next . . . I am open to any assistance.

Maybe you are looking for

  • To have a field value in FileName

    Hi All, I am doing an IDOC to XML File scenario. My requirement is to create multiple files at the target with the Filename having a field Value in it. In the mapping i will be using RFC calls which will return multiple records and if my RFC returns

  • Need to remove syles/images via CrystalReportViewer

    I am trying to embed a report in the app. I only need the report (minus the toolbar, "main report" tab, printLayout and border gifs) I was able to remove the a) toolbar, b) "main report" tab, c) partial background style - using setDocumentViewType -

  • Is it normal?(NetworkManager applet's strange output & 3 IPv6 address)

    1) label ppp0 appears in NetworkManager applet every time when I up vpn-connection 2) Also something strange with enp5s0. Output of "ip addr": 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default     link/loopback 00:00:0

  • Javascript not parsing through in an HTML data set (table)

    I have a spry dataset (html table) working perfectly on my site.  I have an 'info' column with some HTML, an image, and youtube embed.  All of these parse correctly and show on the page, but for some reason my google adsense (javascript code) is not

  • V4 - How to create OLAP objects?

    I would like to start using the OLAP functionality now built in to SQL Developer. I would like to create an Analytical Workspace, Dimensions, Measures etc. The help says To create an analytic workspace:  In the Connectors navigator under OLAP Option,