ITunes will not open iTouch 2G on device

iTunes will not open on my iTouch 2G and on my Dell laptop running windows & ultimate. Help!  S.O.S.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Store and sign out and sign back in
- Reset all settings      
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up                                                                
- Restore to factory settings/new iOS device.             
If you mean that the iPod does not show in iTunes on the computer:
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Similar Messages

  • Itunes will not open when i click on the icon or when I plug in my device.

    Itunes will not open when I click, left or right, on the icon nor when I plug in a device.

    are you sure your i-tunes is installed proper cause the icon is just a shortcut to the program.You might have some missing files. If so you may need to uninstall it and reinstall a new one.

  • HT1923 My itunes will not open due to the Apple Mobile Device.

    My itunes will not open due to the Apple Mobile Device. When i try and start it on control panel it says i cant. i unstalled Itunes and the components and then reinstalled it like the website says and the same problem occurs. can someone help me please?

    Try updating your QuickTime Player to the latest version. Does that clear up the DEP errors in iTunes?

  • HT201413 suddenly itunes will not open and I get a message that the "Data Execution Prevention" is blocking itunes from opening....why????

    itunes will not open and I get a message that the "Data Execution Prevention (DEP)" feature in Windows is preventing it from opening. (this is after I've been using itunes for years???? If I try to manually deselect itunes from the DEP filter, of course I get a message that itunes cannot operate without the DEP active...another Catch 22 from the evil program designers....

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Itunes will not open and says R6034 an application has made an attempt to load runtime library incorrectly, I tried to load it twice but nothing

    Itunes will not open, it says R6034 an application has made an attempt to load C runtime library incorrectly, then it says service apple mobil device failed to start

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Itunes will not open, message says library was created with earlier version. what now?,

    itunes will not open, message says library was created with earlier version. what do i do?

    Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
    tt2

  • Itunes will not open; it says it cannot be read because it was created by a newer version.  What do I do

    itunes will not open; it says it cannot read because it was created by a newer version.  HELP!

    Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
    tt2

  • ITunes will not open in Windows 7, 32-bit

    I had to reinstall Windows 7.  Since then, iTunes will not open.  I have uninstalled iTunes and all related Apple products and reinstalled several times.  It tries to open up for about 3 seconds and then nothing.  Quicktime opens fine, but no iTunes.   HELP!!

    Hi, hopefully you have solved this now but if not I had a similar problem with an earlier version of iTunes.
    To solve it I had to go into the services menu and shut down a service called 'Bonjour'. Then once iTunes was loaded restart the bonjour service in order to be able to connect a device to it.
    There are also 2 other services one called 'apple mobile device' the other called 'iPod service' which are also known to cause loading problems.
    Hope this is helpful or not needed

  • My newly updated itunes will not open

    To Whom this may concern,
         I have a 15" mac book pro laptop, running snow leopard operating system. I updated my Itunes account about 2 days ago when my security updated popped up, and now i cannot open my itunes. When I click on the itunes icon to open it, it pops up this box that has no writing, however it has a button to press ok, and my itunes will not open. I have tried restarting my computer, i have tried turning off my computer. Please Help!

    Hello Ms. Dunbar,
    I recommend that we complete uninstall iTunes from your computer, then reinstall the latest version from www.apple.com/itunes
    For steps on uninstalling, please follow this resource:
    iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier
    http://support.apple.com/kb/HT1747
    Thanks,
    Matt M.

  • Itunes will not open on windows 8 laptop

    I have uninstalled and installed iTunes on my windows 8 laptop several times and it still will not open or recognize my devices when connected to laptop.  Please help!  Thank you.

    Hello. Posted below is info I posted in another forum which may assist you today. If not please post back.
    Basic Uninstall
    *Remove the Applications in the following order to decrease amount of reboots
    -Apple Mobile Device Support
    -Apple Software Update
    -Bonjour
    -Windows iPod Updaters
    -Mobile Me Prefs
    -Quicktime
    -iTunes
    *Reboot Machine, Download and install latest iTunes, launch, and see what occurs.
    *Follow link below if this continues. It will assist with full uninstall of all Apple Software and folders.
    http://support.apple.com/kb/HT1926?viewlocale=en_US

  • Installed 10.4 update and itunes will not open

    Installed itunes10.4 32 bit version - after successful installation itunes will not open
    any advise?

    Update to my last post.  I have finally "fixed" whatever problem was causing the Apple software products to malfunction on my PC, Windows Vista 32 Bit SP2.  After updating to iTunes 10.4 and Safari 5.1, a series of error messages would appear:1) AppleSyncNotifier.exe 2) iTuneshelper.exe 3) iTunes Failed to properly install - Error 7 (Windows error 126).  I had tried uninstalling and reinstalling iTunes & Safari as well as downdating iTunes to an earlier version, but this had all failed to correct the problem and the error messages still appeared when the programs were suppose to have been removed. 
    I ended up using the Windows Program Manager (in Control Panel) to remove every single Apple product from my PC, including the Apple Installer.  Then I restarted the system.  Taking bits and pieces of advice from this forum, I started the system, went to the Apple website, downloaded and SAVED the newest iTunes version (which includes QuickTime), but did not run the program.  Then I disconnected from the net, turned off all virus and firewall protections, and finally installed the saved iTunes program.  It took an extraordinarily long time to complete the install, but I was able to restore my libraries from my iPod Touch (4th gen) by performing a simple sync.  I reconnected to the net and updated the device software . . . so far, so good [knock on wood], no error messages yet.  I will add each of the removed programs as they are needed in the future so that whatever conflict exists can be fixed - until then, I'm at least happy to have iTunes back!  Hope this is helpful to someone and saves them the 4 hours it took me to get back on track

  • My Itunes will not open, please help

    I am running version 10.7.0.21 - since upgrade itunes will not open.  I have visited the support site and done many things to get this working - taken hours of my time I do not have, including setting up a new user and same result.
    My PC is running Windows 7.  I need my itunes as I have 4 ipods and 3 iphones - I need to back up a phone as I have just upgraded,
    One error I seem to have caught is as follows:
    Problem Event Name     BEX
    Application     itunes.exe
    Version     10.7.0.21
    timestamp     504d85d9
    Fault Module Name Quicktime.qts_unloaded
    Fault Module Version     0.0.0.0.
    If someone has some suggestions, it would be much appreciated.

    You're posting in the wrong area. This is the Mac OS X Lion area.
    Post in the iTunes area.

  • My itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible

    my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible

    i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
    I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!!

  • TS1717 Started a software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    Started a Itunes software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    There are a couple of options that I know of to fix the issue.
    One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes.  You will need to read the instructions in the thread to see the correct uninstall order.
    Second option is use System Restore to set your system back to a date prior to the iTunes update.  I did this before finding the thread mentioned above.
    Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer. 
    Message was edited by: karivers

  • Itunes will not open at all

    hey guys,
    ever since I've reinstalled my pc with windows xp pro sp3, my itunes will not open at all.
    every time i click on itunes.exe it does not do anything. It does give me the hourglass icon as if my pc is working on it. but then it disappears without any itunes response.
    to fix this issue, I have tried any possible method that i could find on the internet. even called the support center but they were not able to help me either.
    I have tried to reinstall itunes *(no effect)*
    did something with the cryptographic something in the administrative tools menu *(no effect)*
    I have deleted the itunes installer cache *(no effect)*
    I installed any older versions,( btw 7 does not work either)but after updating it *(no effect)*
    itunes 6 does work; but since i have an iphone it is completely useless for me. so *(no effect)*
    the strange thing is that itunes.exe does appear in the "processes" tab in task manager, but it does not show in the "applications" tab.
    and every time I shut down my pc, I get the windows message that itunes is shutting down.
    If you have any other suggestions, please be so kind help me.
    this is driving me nuts. It's been going on for two months now.
    Kind regards,
    Bart
    Message was edited by: Pleinvrees

    Pleinvrees
    I am not sure if I have this right from all those posts.
    When you try to start iTunes, there is no error message and you can see iTunes.exe persisting on the processes tab of the task manager.
    If that is your probelm it is commonly do to a problem with cryptographic services.
    Before looking into that there is a quick thing to try:
    http://support.apple.com/kb/TS1776?viewlocale=en_US
    If that's not it, work carefully through *method 4* in the following article:
    http://support.microsoft.com/kb/822798
    Make a careful note of any error messages you get, this is important. post back the names of any dlls mentioned in error messages.
    If you don't get any error messages try starting iTunes.

Maybe you are looking for

  • Using still images with Final Cut (and the apple suite in general)

    I have had a re-occuring and long term problem that has caused me many lost hours of head scratching and work arounds, and as of yet I have not been able to come up with a good solution. Its to do with integrating still images with the Final Cut suit

  • Remote control and MCE remote on Windows

    I am having issues with the remote control app on the Tablet S1 and MCE remotes on Windows 7 (64-bit). After learning the buttons for the MCE remote, pressing the same button more than once from the app does not do anything. For example, if I press t

  • SAP Bex: How to calculate formula variable, without dragging corresponding date in the row

    Hi Experts, In my requirement, we should not do any changes in the BW system. I need to create a Bex query on the existing Info-set, KPI need to be calculated from the date objects. e.g Delivery date - Order date - which has been done with the formul

  • Live Font Color

    When I pull up a Live Font and try to change its color in the Dashboard the result is not the color I pick. Is there any other way to change the color other than using a colorize filter? Thanks.

  • Which photoshop elements will work with a mac desktop v7.1 working on os 10.9.5

    I have a photoshop elements 11 which I purchased some time ago which has a disc for mac computers but will not load on my mid 70s (7.1) mac desktop which is running on the latest 10.9.5 maverick software can anyone give me advice on which elements ad