Itunes will not open, message says library was created with earlier version. what now?,

itunes will not open, message says library was created with earlier version. what do i do?

Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

Similar Messages

  • After downloading update iTunes will not open, message says "The file "iTunes Libary.itl" cannot be read because it was created by a newer version of iTunes." I have windows 7..

    I downloaded update for iTunes when the computer restarted it said I had perform a system restore. After restore a message says " The file "iTunes Libary.itl" cannot be read because it was created by a newer version of iTunes. She I remove iTunes and reinstall it? Or can I perform the update from online? Thank you for your help!!

    See Empty/corrupt iTunes library after upgrade/crash. This message may sometimes be caused by a corrupt library database rather than an outdated version of iTunes.
    tt2

  • Message: This library was created with unreleased version of iPhoto. HELP.

    The message goes on to say, open in iPhoto 2 or 4 before trying to upgrade to 6. I have numerous Libraries on external RAID. All opened fine under 5.
    I certainly never had unreleased version of any Apple program, nor do I know where to get copy of iPhoto 2 or 4. ANY IDEAS? THANKS.
    G5/PB17/15/12   Mac OS X (10.4.5)   Too many toys/too little time

    HI DesperateMacWives,
    Does this happen when you try to open all the libraries or is it just one library giving you that message?
    There have been a number of posters here with the same message. so far I have no solution other than creating a new library from the old one.
    How many images do you have in your library?
    Do you mind losing albums, keywords, comments?
    If not...
    close iPhoto
    -drag the iPhoto Library folder to the desktop
    -launch iPhoto and create a new library
    -double click the iPhoto Library folder on the desktop to open it
    -the two main folders you will need to import are the Original folder and the Modified folder (only if you want to import the edited images).
    -the Originals folder has all your originals photos unedited. the Modified folder has all images that you have edited, rotated, cropped, etc.
    -Drag these two folders to the desktop
    -If you want to save the edited image, find it in the roll in the Modified folder and drag it into the roll of the same name in the Originals folder. It will replace the originals and now will be the original.
    -If you don't care to save any edited images, then don't import the Modified folder into iPhoto or don't bother replacing the edited image with the original image like I just described.
    -If you import the Originals folder into iPhoto you will have all your originals in their named rolls.
    -If you import the Originals and Modified folders into iPhoto, you will have all of the being in the originals folder in the finder. The roll with the same name as the other will have a _1 appended to it's name (in the finder)
    -the roll from the originals will be next to the same roll from the Modified folder within iPhoto. You can then delete any of the images from there if you want.
    I know this might sound confusing but it really isn't.
    Get back if any of this sounds like something you might want to do.

  • Itunes will not open; it says it cannot be read because it was created by a newer version.  What do I do

    itunes will not open; it says it cannot read because it was created by a newer version.  HELP!

    Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
    tt2

  • Itunes will not open and says R6034 an application has made an attempt to load runtime library incorrectly, I tried to load it twice but nothing

    Itunes will not open, it says R6034 an application has made an attempt to load C runtime library incorrectly, then it says service apple mobil device failed to start

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT203175 I tried to update my Itunes to the news version and now it will not open it says it was installed incorrectly I need to know what to do so I don't lose all my music

    I tried to update my Itunes to the news version and now it will not open it says it was installed incorrectly I need to know what to do so I don't lose all my music

    try with this one
    uninstall all the apple application S/w like Quicktime, Bonjour,
    apple Device Support, Apple Auto update, Itunes etc from your pc,
    Reboot it
    Now download a fresh itunes from apple and try installing
    Reboot it
    If you are having Problem in uninstalling any of the apple application
    try 'revo uninstaller' and uninstall all the apple applications
    mentioned above

  • Ipod will not turn on, itunes will not open, window says ipod is in recovery mode and needsto be restored

    ipod will not turn on, itunes will not open, window pops up says ipod is in recovery mode and needs to be restored. what do i do now?

    You restore the iPod via iTunes. Don't plug the iPod in. Open up iTunes and then plug it in and then try restoring, if it fails to restore a few times, keep trying. I do it on a daily basis, you're using an Apple product, remember...
    EDIT: Do it from another computer if all else fails.

  • Transferred iTunes library from pc to new mac, iTunes ; however, when opening iTunes on mac it reports the library was created with a newer version of iTunes and won't open.

    Transferred Itunes library from pc to new mac; however, when opening itunes on the new mac it reported that the library was created with a newer version of itunes and could not be opened. It asked if I wanted to download updates and I did. However, the new mac is up to date. Itunes won't open. What to do now? Any help would be appreciated.
    Thanks
    Jim

    Hello, Stephen.
    Thank you for the question.  You will need to rebuild your iTunes library file in order to open an older version of iTunes.  Below, I have included the article that walks you through this process.  Start with the section labeled Re-creating the iTunes Library file.
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    Cheers,
    Jason H. 

  • ITunes will not open on Windows Vista after upgrading to new version

    After installing the latest version, my iTunes will not open. I have uninstall and reinstall two times and still nothing, any suggestions or tips?

    King Penguin set you on the right track. It's probably security software not recognizing the new version of itunes, and blocking it.
    http://support.apple.com/kb/TS3125

  • TS1717 Itunes will not open it says my computer is missing javaScriptcore.dll. I've downloaded java but I still get this message. How do I fix this probplem?

    My Itunes app on my Windows 7 pc will not open. It gives me a message saying my computer is missing 'javaScriptcore.dll'. I've downloaded Java to the computer and restarted it but I'm still getting this message. How do I fix this problem?

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • Created a user account for my daughter but itunes will not open, just says something about digital signature policy

    Hi there, newbie here. Wondered if anyone can help, opened another user account for daughter on windows 64, and when we tried to open itunes a message came up saying it could not open because of digital signature policy, when i go back to my user it opens ok.
    Could anyone help.
    Cheers

    am not prepared to enter my credit card also on her account application.
    You can enter it on the registration page then delete it immediately after you complete the registration.
    If I purchase a iTunes card with some credit, can I open the account for her just with the code?
    If you wish. Instead of going to Create new accout, go to Redeem on the main iTunes store screen, enter the code, then select *Create new account*.
    What will happen if the credit on the card gets to zero?
    She will not be able to make a purchase until another gift card is entered or a CC is linked to the account.

  • Itunes will not open message reinstall itunes error 7(windows error999)

    I have unistalled and reinstalled several times will not open.  Running windows 7, worked for a few weeks then this message error 7(windows error999)

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • Own CS5, will not open, message says, "Some of the application components core missing from the Application Directory.  Please reinstall the application".  What do I do?

    What now?  Can't get a phone number  to contact Adobe???????????????

    Hey Cal do u have a windows box or apple? Do you have the compressed files from the original download or a backup or image of your computer? Last question for now-please describe the events that led up to the error message in your original question. Like " my girlfriend was mad at me and while I was cleaning up some photos in CS5 she cut the electric to my desktop!"
    there is a chance if its a windows box and its running the OS win7, win 8, win8.1 and the systems restore setting turned on that if you can remember the last time(date) that CS5 worked: restore it(the computer) to that date or before that date. Also is there are some other options if its a mac but i need to know the operating system version and other info as to what other software is on your machine plus similar info like sw such as mackeeper, boot camp. parallels that another adobe community member(Bo LeBeau ) alluded to.
    Provide me more info and i can/will help you! maybe even a way to minimize your cost of paying for adobe support if that what you wanna do.
    Another vector that may be worth the effort is: find out generally or exactly what components are missing/corrupted from the application core sometimes there can be confusion(zip software posing as malware) or use in the mac and windows world of wrong procedures and use of decompression of compressed( ie winzip vs winrar) files that lead to CS5 working and all of a sudden not working. Last even installers can get flaky over time. So i know you wanna handle this so u can use CS5; but I need some more info. Have a good one! later and greater!

  • My computer crashed and I had to re load my operation system. now itunes won't open. it says it was created by a newer version? what is that?

    my computer crashed and I had to re load my operation system. now, when I try to open my itunes all I get is a message that says "can not be read because itunes was created by a newer version" what does that mean and how do I correct it. I need my music back!

    As iTunes is uopgraded the newer versions require that the iTunes database be upgraded to match. It sounds like you now have an older version of the sftware attempting to load an upgraded library which it can't do.
    What version of OS X are you running?
    What version of iTunes are you currently running?
    What versions were you running when your system crashed?
    Allan

  • My itunes will not open and says i should download it again and i have but it still wont open! what should i do?

    My itunes wont open what do i do?

    what's the precise text of your error message please, matti? (There's a few different ones I can think of that you might be getting.)

Maybe you are looking for

  • What is the recommended way to get a java.sql.Connection to the DB  for ADF

    How do I create a standalone database connection based on the datasource setup in ADF? I have seen code like this in a method of AppModuleImpl.java but that seems a bit of a hack. Connection conn = this.getDBTransaction().createStatement(0).getConnec

  • Error message: Network connection timed out

    Go to download iOS5 on to my iPhone 4 and just as it was about to finish downloading, I get the error message. It's come up many times before when trying to update the phone, but I have just been ignoring it and not bothered with an update. Using lat

  • Can OS X Tiger be purchased on CD-ROM

    my PowerMac g3 which I would like to upgrade only has a cd rom drive. I have os x tiger on DVD and I think apple only made it on DVD. did apple ever make it as a cd version?

  • Changing package structure through scripts

    Hi , I have a project with huge number of files(around 2 thousand). I want to change the package structure of my source files.Previously no consistent approach is followed.so i want to correct that now. I can map each file to a new package structure.

  • Display a video with adobe air

    Hi, I'm developing an html/ajax app on adobe air. In this app that runs in fullscreen I have 3 blocks where I show 3 different swf files. In one of this blocks I have to display a video. In a first attempt I wrote a little swf that loads an flv file