Itunes will not open on Win 8 saying The Procedure entry point.....

I had all sorts of issues getting iTunes to run on Windows 8 - but found a solution here somewhere.
Suddenly today it is giving a massive long error message... The procedure entry point?videoTracks@QTMovie......... could not be located in the dynamic link library C:\Program Files (x86) Common Files \ Apple | Apple Application support \WebKit.dll
I have repaured, uninstalled, reinstalled, uninstalled, downloaded a new version, installed/.... so far with restarting etc it has taken ages and nothing is changing the status.
Any ideas anyone please?
Thank
Carol

I know you've already fixed this one, Carol, but for other people reading this post, the following user tip might be useful:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

Similar Messages

  • After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

    After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.

    Hi, I get the same error EVERY time iTunes updates.
    I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
    My Question:
    Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
    It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
    Thank You,
    Steve

  • ITunes does not start. Get a message "The procedure entry point CMBlockBufferCopyDateBytes could not be located in the dynamic link library CoreMedia.dll.

    What do I do to correct this situation?

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • 11.2 iTunes update has made me unable to open iTunes. It says "The procedure entry point ADiAdID_AquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll" I have done everything imaginable! Please help?!

    I deleted, reinstalled, searched, enabled, disabled--EVERYTHING and yet iTunes will not open! This is exactly why I hate updates rom Apple because they do this time and time again. I deleted multiple .dll files and nothing has worked. This is a glitch from the newest update 11.2. It says: "The procedure entry point ADiAdID_AquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll" and I have no idea what the heck that means!
    If there is anybody that is having similar issues and know of what the issue might be, please help =[
    Thanks.

    Hi, Did you strip out all components, delete the named folders and reboot as in the second box of  Troubleshooting issues with iTunes for Windows updates?
    Checking on my computer here (Windows XP SP3 32 bit) I have one copy of iAdCore.dll in the main \Program Files\iTunes folder with the following properties:
    Size 3,004  KB
    Created 8th May 2014
    Modified 8th May 2014
    File Version 1.0.0.1
    Product Version 1.0.0.1
    I'll try to get a look at 64-bit system later to confirm the correct path.
    tt2

  • ITunes will not open on my iPhone with the new update 10/18/13

    iTunes will not open on my iPhone after the new update 10/18/13. It opens on my iPad that also has the new update; just not my iPhone.

    OK, so what troubleshooting steps have you taken?  Have you taken the ones recommended in the User Guide?  Exactly what HAVE you done thus far to help solve your problem?

  • Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

    Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions for a non techy person?

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • I am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in teh dynamic link library SQLite3.dll"

    I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll"  Any ideas what my problem is?

    Hi whatsthe77,
    Welcome to Apple Support Communities.
    You may want to follow the steps in this article to reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Have a great day,
    Jeremy

  • When I allowed an upgrade to Itunes on my HP Windows 7 computer now I have this error message when I turn on my computer:  AppleSyncNotifier.exe-Entry Point Not Found.  The the explanation in the dialogue box says:  The procedure entry point sqlite3_wal_

    Error message after allowing an upgrade:My dialogue box in the error message says:  The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll--this happened after I allowed an upgrade to be installed.  I have HP Windows 7.  Now my Iphone will not sync.  What do I do?

    Found this fix here which worked for me with a similar problem.
    https://discussions.apple.com/thread/3196594?start=0&tstart=0
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well.

  • Edge animate will not launch it says The procedure entry point GetGestureInfo

    edge animate will not launch it says The procedure entry point GetGestureInfo could not be located in the dynamic link library USER32.dll.

    Hi, Scott-
    Please take a look at this thread here:
    http://forums.adobe.com/message/5076440#5076440#5076440
    I'm guessing you're using Vista; I'll contact you via private message to get you started again.
    Cheers,
    -Elaine

  • I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams stop

    I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working".  Help!

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Itunes will not open on macbook.  says requires quicktime 7.5.5 or later.

    Have a macbook and when I try to open itunes it says that itunes requires quicktime 7.5.5 or later.  I try to download quicktime as i have 7.5 and it tells me to manage software through the software update function.  The software update function will not find an update for quicktime.  Help!  Not sure how to get itunes set up

    Hi there,
    I have also just updated my computer via the system updates. I am running OS Snow Leopard 10.5.8, and my iTunes won't open and then prompts me for a Quicktime update 7.5.5.
    Now, I have gone through the Apple support and downloaded the Quicktime update 7.5.5 for OS 10.5 or later (or whatever it was - the second from the top?). Anyways, it says it installed properly and that I need to restart my laptop. Once I have restarted, iTunes still will not open and it still says I need to update Quicktime.
    I have tried a few other solutions and nothing seems to work. Do you have any further suggestions on what I have to do to make this work? I'd really not like to have to use another media player to play music. And I don't really want to have to go out and buy a new laptop.. Although I'm starting to get really frustrated with the apparent lack of support for older versions.
    Any thing you can suggest will be greatly appreciated.
    Thanks!

  • TS1717 Itunes will not open. It just says" This version of Itunes has not been correctly localized fro this language. Please run the English version". I have tried to open with Shift/Control but it will not open. Help?

    Itunes will not open from my desk top. It just says "This version of Itunes has not been correctly localized for this language. Please run the English version". How can I change versions or whatever if unable to open at all? TIA

    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • Itunes will not open on win 7 pc after oct update?

    I am running a win7 pc-64bit os and itunes will not open since I updated it in Oct. I have attempted uninstalling and reinstalling the itunes s/w several times. I have tried without a firewall and with anti-virus programs disconnected. I do not get an error message. Itunes launches with a blank screen and the busy "spinner" spins until I reboot. Anybody with a similar problem or a solu

    I don't know if this will help you  but I just went through this. After three weeks of thinking it was my firewall and making all the adjustments suggested by apple, I discovered it was my Net Nanny software that was blocking my way. I had one character wrong in the accepted lists on websites and so it looked right to me when I checked. It wasn't until I completely uninstalled the software and reinstalled, and re-entered all my lists that I realized the error. Now it is working great. So you may want to check your list of approved websites VERY carefully or re-enter them on you firewall software or any content blocking software you may have.
    Hope that helps.

  • My itunes will not open when I click on the icon. An system error appears. "the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Any ideas on how to resolve, I have tried installing

    My itunes will not open, it displays an error that MSVCR80.dll is missing. I tried reinstalling itunes but it fails because the service is not able to start.

    Same thing happened to me. I ended up completely uninstalling itunes then downloaded it again from http://www.apple.com/itunes/.   If you're using firefox, for some reason itunes will not download and  I  don't know if using googlechrome will also have problems,so just to  be  sure that it will work on your first try, use internet  explorer  when you download itunes. Good LUCK!!

  • Itunes will not open when i click on the icon or when I plug in my device.

    Itunes will not open when I click, left or right, on the icon nor when I plug in a device.

    are you sure your i-tunes is installed proper cause the icon is just a shortcut to the program.You might have some missing files. If so you may need to uninstall it and reinstall a new one.

Maybe you are looking for

  • Why is my battery draining down so quickly, since the latest update?

    Why has my battery life gone from a once a day charge to nearly needing to keep it plugged up all the time. Since I installed the latest update, my phone will go from 100% charge to 30-40% within 3-1/2 hours and that's just sitting in standby on my d

  • Differences Between Optimizer Solution and Planner Solution in Project Server Events

    Dear All, Does anyone know the differences between Optimizer Solution and Planner Solution in Project Server?  In http://msdn.microsoft.com/en-us/library/office/gg204879(v=office.15).aspx and http://msdn.microsoft.com/en-us/library/office/gg200978(v=

  • SAP Design Studio Bookmark security

    We like the new feature in 1.3 which allow us to save bookmark / navigation state in SAP Design Studio application. However it looks like it require Administrator rights for users to be able to save or delete it. We were not able to locate what secur

  • ABAP Code to get Production Order Quantity for a material-Status REL,CRTD

    hi all, I am new to SAP. I am stuck with a problem while writing a abap code for getting all the production order quantities for a material with System Status REL and CRTD. Please help me out. This is what i tried to do.   IF t_mat[] IS NOT INITIAL.

  • Inserting Video Problem

    Hi, Im trying to insert an AVI video into dreamweaver html page in a layer. I go to insert, media, plugin + then select the video i want + then it comes up as a grey box but then when i view in browser it doesnt start playing. Please can anyone help?