ITunes will not open unless I have created a new iTunes library...

I created at least 4 iTunes libraries, but they when I try to open them, iTunes does not accept them as libraries. I may be doing it wrong, but I don't know. Any assistance would be much appreciated. Thank you!

i had problems like this back when i installed iTunes 7.2. I had to uninstall 7.2, go onto the internet and get iTunes 7.1. have no clue if it will work for u though.

Similar Messages

  • Firefox works fine until after lunch. Then it will not open, unless I reboot. Am at work, & I shouldnt have to do that, NEED a fix.

    Everyday its the same thing. By midafternoon, Firefox will not open unless I reboot. I am at work, and have too many things open all day to stop and reboot for a browser, when I also have IE. I prefer Firefox, it is set as my default, and have many passwords saved there that are not saved in IE. Surely there is a fix for this? I have removed it, downloaded it again, followed other suggestions from your site, but still have the same problem. If I leave a window open all day long, it will still work for me, and thats what I try to do. However, invariably, there will come that accidental second that I hit the red X at the top and totally regret it! Please help!

    I had tried this before, but went ahead and tried this again.
    I clicked on "reset Firefox". Firefox closed, but did not come back up. When I tried to open it again, I did receive a message that said Firefox is running but is not responding, that I couldn't open another window without stopping the processes on the other page.
    I never got a window that showed me the information that was imported, or a place to click finish.
    Since I don't believe this completed, I don't believe my problem will be solved.
    Debra

  • I have a 27 inch iMac with maverick os.  my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9.  I can find the projects and they have a ".rcproject" file extension

    I have a 27 inch iMac with maverick os.  my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9.  I can find the projects and they have a ".rcproject" file extension

    Thank you GeeD. I'm still stymied.
    I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
    When I open iMovie 10.0.8, the Events and Projects Folders are empty:
    When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
    Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
    Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
    [As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
    Back to the update of version 9.0 to 9.0.9.
    Presumably because I have version 10.0.8 installed, I got this alert box:
    So, I cannot update version 9.0
    and I cannot "Update" the Events and Projects created in version 9.0.

  • Just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

    just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

    Best route here is to uninstall iTunes completely using the Windows Control Panel.
    Make sure you know exactly which version of Win 7 you're running.
    Restart your computer from cold (with no iTunes).
    Go to Apple website and download the correct version for your operating system.  Install following Apple prompts.
    Once installed, close iTunes.
    Restart your computer from cold (with new iTunes).
    Start iTunes - all should be operating well!  Good luck ...

  • I tunes will not open unless ipod is connected

    I have downloaded and totally remove itune 3-4 times. It will not open unless the ipod is connected. I keep getting a message that says :the itunes folder can not be found or created. The default folder is located in "my music". what do i have to do to get it to work????????????????

    Do you see an error message when this happens?
    If your computer has one of the LSPs mentioned in the article below, you may have to do a winsock reset or remove conflicting software.
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store

  • I Tunes will not open unless i restart computer

    I Tunes will not open unless i restart computer

    Do you see an error message when this happens?
    If your computer has one of the LSPs mentioned in the article below, you may have to do a winsock reset or remove conflicting software.
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store

  • Firefox will not open unless I delete it and download again.

    Firefox is set as my default browser. Something has happened recently that caused this. I have both I.E. and Torch which both open fine. When I try to open Firefox, nothing happens. Pressing Ctrl,Alt,Del shows nothing in the "task" box. When I click "New Task" and enter Firefox, nothing happens. The only way it will open is for me to delete the program, restart and download it new. It will open after the download, but if I close it, it will not reopen.

    Hello,
    Try to create a new profile to see if it works or not.
    https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles

  • ITunes will not open on my iPhone with the new update 10/18/13

    iTunes will not open on my iPhone after the new update 10/18/13. It opens on my iPad that also has the new update; just not my iPhone.

    OK, so what troubleshooting steps have you taken?  Have you taken the ones recommended in the User Guide?  Exactly what HAVE you done thus far to help solve your problem?

  • I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

    I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

    I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
    [https://www.mozilla.org/en-US/firefox/new/ Firefox]
    [http://kb.mozillazine.org/Installation_directory Installation Folder]
    [http://kb.mozillazine.org/Profile_folder Profile Folder]
    Please note that using system restore would usually damage the Firefox installation.

  • I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the proble

    I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened

    https://forums.adobe.com/message/6219922#6219922
    See if the issue in the thread above helps you to solve your problem.

  • The message cannot be seen on incoming emails.  I can only view the message if I click on reply.  Also any links attached to email will not open.  I have tried everything to solve the problem but not able to.

    A message cannot be seen on my incoming emails.  I can only view the message if I click on reply.  Also any links attached to email will not open.  I have tried everything to solve the problem but not able to.

    Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Iphoto will not open, says I am useing a newer version, beats me, I can't find it, anyone out there have a clue, Thanks

    Iphoto will not open, says I am useing a newer version, beats me, I can't find it, anyone out there have a clue, Thanks

    Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #4, Rebuild Database.
    OT

  • After I updated to yosemite my iMovie will not open.  I have found the folders in the applications for both versions 9 and 10 but neither one opens when I double click on the icon.  How do I remedy this?

    After I updated to yosemite my iMovie will not open.  I have found the folders in the applications folder for both versions 9 and 10 but neither one opens when I double click on the icon.  How do I remedy this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Just downloaded LR 2015 from creative cloud and when I click icon to run it flashes in and out and will not open. I have a macbook pro 13" retina

    Just downloaded LR 2015 from creative cloud and when I click icon to run it flashes in and out and will not open. I have a macbook pro 13" retina

    Hi Frank,
    You can follow the article: Sign in, Sign out | Creative Cloud desktop app to sign out and sign in back again to Creative Cloud and try to launch your Lightroom 2015 application.
    Let us know if it works or not.
    Thanks,
    Ratandeep Arora

  • I just installed Lightroom 5. It will not open. I have clicked on the desktop icon as well as the start menu button with no results. What am I missing?

    I just installed Lightroom 5. It will not open. I have clicked on the desktop icon as well as the start menu button with no results. What am I missing?

    I had the same problem, and I believe it is caused by having the Creative Cloud application doing the updating of LR.  I "fixed" the problem by:
    1. Uninstall Lightroom
    2. Download the stand-alone LR 5.6 installer from Product updates
    3. Install LR 5.6 using the stand-alone installer, instead of using the Creative Cloud application.

Maybe you are looking for

  • Datepicker on custom popup page close the popup page when date is selected

    Hi I have created a custom popup page according to the "How-To": Build Custom Popup Pages in Oracle Application Express. http://www.oracle.com/technology/products/database/application_express/howtos/how_to_create_custom_popups.html I have changed one

  • ITunes and surround sound internet streams

    Hi all, I'm looking to broadcast internet streams in surround sound and I want to select an audio codec which iTunes will play. Does anyone know which surround audio codecs are supported for internet streaming? Best regards, Daren.

  • Move to Premiere Pro CS5.5?

    Dear Steve: I think your book about Premiere Elements 9 is great.  It's been very helpful as I try to learn the program. I have a 64-bit Windows 7 operating system on Dell XPS laptop with 8gb of RAM.  I learned yesterday that PE9 uses only 4gb of RAM

  • Format model oddity; G and V combined

    Hi, can I have your opinion on this.. Some background if you're not familiar with the 'V' in format models: select to_char(100, '999999999V9') newnum from dual;  --- 100 * 10^1 =   1 000 select to_char(100, '99999999V99') newnum from dual;  --- 100 *

  • Compiling exiv2 library for use on PPC help

    I need to convert the exiv2 metadata library to be compatible for the Mac. I have managed to use x Code to do this for OS X 10.5x on Intel machines but not for use on 10.4x on PPC machines and have failed in my attempts to do so. If anybody has acces