ITunes Will Not Play Entire CDs Unless Error Correction Switched Off!
I was having problems with iTunes in that it would only play 2 tracks on a CD before iTunes froze and had to be Force Quit.
On the advice of a poster on this Apple Discussions Forum I went into: iTunes>Preferences>Advanced>Importing and unchecked the "Use error correction" button. Voila, my iTunes will now play complete CDs.
But surely this is not right? It has been suggested to me that this is a software issue and that I should carry out an archive and install of Leopard.
What do you think?
+4. Windows blue screen comes up to check the FAT32 drive to see if there are any errors. There is nothing.+
what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
if the blue screen mentions a specific file, let us know what that is called too. (exact spelling, please.)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
Similar Messages
-
have rented a movie, downloaded it 4 times but it will not play, says an unknown error occured in itunes store. error 42110
Hi beckai.rose,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 3001," "-42110," or "5103"
This alert is related to iTunes Store movie rentals and authorization issues.
Make sure you are using the most recent version of iTunes and QuickTime. They both can be downloaded free of charge.
If your iTunes is up to date, remove the SC Info folder.
If you continue to have issues with this purchase, contact the iTunes Store Support team:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
- Judy -
Itunes will not play if Chrome is running
I recently installed iTunes 12.1 on a Toshiba Satellite running win 8.1. Problem is that when Goggle Chrome is running iTunes will not play. My library is there and the progress bar shows at the top of the screen but it stays at 0:00. If I close Goggle Chrome, and restart iTunes it works fine. Chrome is the 64 bit version up to the latest revision. This is a brand new install so all software is current and patched. Any Ideas Why?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
After updating to windows 8.1 iTunes will not play video
I recently updated to Windows 8.1 but since i have my iTunes will not play video i previously downloaded from the iTunes store. The video will play in QuickTime without issue though, please help
sorry it's not my apple id. it's my icloud email/account. after i updated to ios 8.1.2 my icloud acct on my phone is wrong. it's using my old college email address instead of my current icloud account email. my old college email address *used* to be my apple id, but i changed my apple id to my gmail account a few months back. anyway i can't "sign out" or delete the icloud account bc it thinks my college email address is my icloud account and it keeps asking for the password. so i'll type in the current password for my icloud account and it says it's wrong and i need to retry or change the password, which i've already done twice and nothing changes. probably bc its asking for the password associated with the college email address it thinks is my icloud acct.
i can access icloud on my desktop without a problem... make any sense? do i have to restore my phone now or is there a solution? i've wasted the last 2 days trying to figure this out. i can't send or receive emails on my iphone bc of this. which really ***** for work. -
Itunes will not play a number of songs in my library as they were purchased a long while ago using an email address and ISP that I no longer use. When I try and play them I get the message "this computer is not authorised to play this song, authorise your computer now". Any ideas?
Hello, quckvic.
Thank you for visiting Apple Support Communities.
You will need to reset your Apple ID password via the steps in the first article below. Take a look at the option that refers to answering the security questions. Since you do not have access to the email account and if you are unable to answer the security questions, see the second article.
If you forgot your Apple ID password
http://support.apple.com/en-us/HT201487
Contact Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
I have a IPHONE 3G and recently I downloaded the latest version for my phone and since some of my songs that I downloaded thru itunes will not play in it's entirety
I have a IPHONE 3G and recently I downloaded the latest version for my phone and since some of my songs that I downloaded thru itunes will not play in it's entirety
-
I bought a new, larger external hard drive. I have my iTunes library on the external drive instead of C: drive, Using Windows 7.
I copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive.
iTunes will not start or run unless the old hard drive is plugged in.
If I disconnect the old drive iTunes shuts down.
Any ideas. ??Hello kskip,
Thank you for providing so much information about what is going on. It sounds like you have setup iTunes to save new content to your new external hard drive in iTunes>Preferences, but it sounds like iTunes is not opening iTunes Library.itl file on the new external drive. You have one last step to take to have iTunes point to your new external hard drive rather than your old one:
Steps to create or choose a different iTunes Library file
If iTunes is running, quit iTunes.
If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
You should see the following screen:
Additional information
If you do not see the screen above, then you did not hold the correct key at the correct time. You may want to try again. Note that if you pinned iTunes to the Start menu programs, and open it that way, it may not work.
Once you select "Choose Library," you will need to navigate to the iTunes Library.itl file on your new external drive.
You can find the full article here:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
iTunes will not play any songs from my library. When I click on the song to play the title appears in the box as if it is going to play but the the bar does not move and then the title disappears and a bunch of lines appear.
When I play a video, movie or TV program the video plays fine, but no audio comes out.
Audio and video work fine in any other application and all the system sounds work fine. I can also play audio and video fine using Windows Media Player.
I have shut-down and restarted several times and even let the computer stay shut-down overnight, but to no avail. I have upgraded to the newest version of iTunes and QuickTime. I have also made sure I have the most current version of all audio and video drivers for my laptop. I have also update Vista to Service Pack 1. I also noticed that MS Silverlight also loaded, so not sure if this could be causing my problems.
Any help that anybody can provide would be greatly appreciated.Finally was able to fix the problem. Here is what I had to do:
1. Uninstall MS Silverlight
2. Install all new Audio and Video drivers (even though they were already the newest versions I had to re-install them).
3. Installed newest MS Windows Vista upgrade.
4. Restarted computer
5. Made sure all my audio settings were set to use the proper speakers.
Now everything is working fine. -
ITunes will not play songs on NAS drive
I have a WD My Cloud NAS drive with all my music. I've been playing the music through iTunes for the last year or so on my Windows 7 Professional PC. I just upgraded to iTunes 12.1.0.71 and now iTunes will not play any of my music. iTunes still sees all the music on my NAS drive but clicking the play button does nothing. Only way I can get anything to play is to import the albums/songs into my playlist in iTunes, something I really don't want to do.
Hi Josh,
I have exactly the same issue. I also have many songs I purchased on iTunes that will not download. It seems random. I have 3 recently purchased albums that only half the tracks on one album will download, most on another, but only 2 on another. It's annoying! I keep tapping download and they just give up saying Cant connect to iTunes'. Even though it is.
Regardless, I have too exactly the symptoms you described, but had them periodically before today. Again, not sure if its related, but have you recently got an Apple TV? -
ITunes will not play music, songs stuck at 0:00
I know this is a frequent question as I've spent three hours searching through the support discussions here as well as elsewhere online, but none of the possible solutions I found posted worked for me.
The problem, if you're unfamiliar with it, is that iTunes will not play any music (either songs I've ripped or songs I've bought off of the iTunes Store).
I've tried updating iTunes and Quicktime, uninstalling and then reinstalling both, updating my audio drivers, playing with the preferences of both iTunes and Quicktime, made both programs the defaults for all associated file types, and rebooted countless times.
I'm on a 3-month old Dell Inspiron running Windows 7 if that makes a difference.
Any new suggestions anyone has or something random you may have tried that solved a similar problem would be greatly appreciated.
Thanks!I'm afraid the problem is more widespread than just iTunes and the update didn't fix it. There's a thread out there about users not getting any sound/audio in Lion after wake from sleep or just having it idle for a long while.
Hopefully, Mac OS X 10.7.2 will fix the issue.
Thanks! -
Itunes will not play my music nor videos
I recently updated to itunes about a week ago..and for some odd reason my itunes will not play any music that is located in the itunes music library.. I un-installed it, then re-installed it..and it still did not play the music.. I believe it has affected my windows media player on my computer as well. I was wondering if anyone had any information or a solution to my problem??
thanksYou can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
-
Hi..can anyone help? Songs on my itunes are not playing to the end? They cut off part way through a song. Its not on all the songs but lots of them? thanks
A couple of months ago, I went to the Apple Store to try and sort this problem out. I was told that I was not playing my songs out of an actual music library. I created a library and loaded all of my songs, movies, etc. onto it. I had found that when I synced my songs from the new library onto my itouch, the songs no longer stopped in odd spots or bled into each other. To ensure that most of my songs had been fixed, I played the ones that were the most problematic. Fortunately, the songs play all the way through without any interruption. So far, I have not encountered the same problems that I had posted in my question. I apologize for not knowing the fellow's name who helped me with my iTouch at the Apple Store, but I would like to say how thankful and happy I am now that my iTouch no longer skips to the next song.
I know that other people have had this same issue with their iPods. If you encounter your music not playing correctly, I would suggest that making a new library and loading all of your music into the new one may help correct the problem. I hope that this helps. -
I have no cell service at my house, but when i leave it my iphone 5 will not pick up service unless i turn it off and back on????
Reset all network settings, go into settings, general, reset network settings.
-
I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help
Connect the iPhone to the compter you usually sync with
and use iTunes on that computer to do the restore.
Maybe you are looking for
-
JSPM Error while applying As Java Patch to PI 7.1
Dear All I am facing an issue when trying to patch new Pi 7.1 Ehp1 Java patch through JSPM steps i did . since the download manger is not working for us i click on the link and down load all the patches to windows machine ( Installed machine is AIX)
-
Hi all, Iam not able to copy and paste between oracle and other applications(ms word,etc).A java applet window is coming.Instance is R12.The problem is instance specific.am able to do the above in some instance while not in others.have reinstalled th
-
The battery of my iPhone 5 easily discharges even when not in use. The unit was tested by Apple and passed the Battery Health Test although the performance showed otherwise. The battery deterioration started 11 months after purchase and is not covere
-
User specific default variant setting
Hi gurus, My requirement is Report should get executed with default user specific Variant. For example while running MB51 system should pick the corresponding variant based on the user who is executing the report. Based on threads i created variants
-
Call forms and reports through a hierarchical tree node.
Hello, I am new in pl/sql programming and I have some dificulties. I have created a hierarchical tree, in order to use it as a menu in an application that I am trying to develope. The problem is that I do not know how can I make the last nodes to be