Itunes will not stay connected to Airport Express with any Yosemite update.

Since installing Yosemite (original and updates) my itunes will no longer stay connected to Airport Express on my iMac. Any ideas?
I have no probblem at all when using ipad or other devices.
Matt

Hello mtvessell,
If you are having issues connecting to the iTunes Store, then start with the article below for some general troubleshooting to get it sorted out. If it continues, then take a look at the second article for additional support. 
Can't connect to the iTunes Store
http://support.apple.com/en-us/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/en-us/TS3297
Regards,
-Norm G.  

Similar Messages

  • PowerBooks will not automatically connect to Airport Express

    Recently purchased iPhone and changed my Airport Express password to something easier to spell on iPhone keyboard. Since then, two PowerBooks I own (early G4 and later G4) will not automatically connect to Airport Express Network. I have to manually go to Airport icon in menu bar and join network. Any advice on this small annoyance is greatly appreciated.

    Went to the Sys Pref and edited the profile of the AE. Now loads fine.

  • Can not stay connected to Airport express

    I have an airport exress that is less then 9 months old.  I have my internet provide wirlessely so my macbook pro picks up the signal and i share it with the airport exress.  With the AE set to bridge mode.  This was all working fine for the last 3 months, but now for some reason I can not stay connected with any of my devices wirelessly with the AE.  I try to connect with my Iphone 4s and when i click on the network to connect i never recieve a check mark on the left all it does is give me the moving circle.  I try to search the web on the phone and it will work for a second then not work for who know how long then work for a second ect.... i have hard rebooted the AE, reset network settings in my phone, reset smc and pram.  when i access the ae through airport utility on my mac the internet shows green and the AE show amber becuase it says it does not have a valid ip address.  I access the AE from my phone and the AE shows the same and the internet will go from green to amber and back.  Also it will not stay connected to the AE i try to change setting on the AE through my phone and as long as i do it quickly it works fine, but if i wait anylonger then 10-30 seconds the phone drops the AE and i have to start over even though it will pick it up again with in  a second or two.  this is the same for ipad, three iphones, dell computer, and a android phone. 

    Simply reconfigure your Airport Express to either use for airtunes only or to extend the range of the existing network. This effectively connects the Airport Express to your main wireless router as a basic access node rather than a separate router creating its own network.
    If you consult the User Guide that came with your Airport Express you'll find additional information on how to setup an Express to simply extend a local wireless network rather than function independently.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • G5 & PC NOT STAYING CONNECTED VIA AIRPORT EXPRESS!

    I've got a G5 and a PC - Hoped that Airport Express would allow both to access internet (via cable modem).
    The connection drops after a little while. Everything says its working but obviously it's not.
    ANY HELP??!!!
    Thx!

    reinis wrote:
    I have white Macbook (802.11g capable) and Airport Express (802.11g capable).
    I have a LAN internet connection, which is pretty fast. When I connect the cable to my ethernet and try to download something (for instance, speedtest.net) then the download speed is 33Mbit/sec, and upload is 20Mbit/sec.
    I also have an Airport Express router - the 802.11g to be specific. So in the Airport Utility, under Wireless I selected "802.11g ONLY" and selected 24Mbit/sec Multicast rate.
    When I tried to download something when conected to my Airport Express router - what actually happened, is that my computer is 2 m away from the Airport Express and the max download speed approximately should be ~24 Mbit/sec, but it turns out that the down speed is ONLY 14 Mbit/sec and the upload speed is 11 Mbit/sec.
    So it means, that the Airport Express actually cannot deliver the 24 Mbit/speed.
    I am actually pretty dissapointed, because I was kind of okay with the fact that I will loose those ~10 Mbit/sec from my actual internet sped when connected via Airport express, but I did not expect that it would be halved.
    Any solutions?
    According to one source, the maximum throughput of 802.11g is 25 Mbps. That assumes ideal conditions. To learn more about those conditions in your case, launch AirPort Utility, double-click on your AirPort station to enter "Manual Setup" mode, select the "Advanced" panel, click on the "Logs and Statistics" button, then click on the "Wireless Clients" tab. There you will see values for signal and noise. The closer those two numbers are together, the worse throughput you can expect.
    If the value for noise is high, you might try setting your AirPort unit to a different channel.
    All the above is based on your having no other Wi-Fi equipment.

  • Airport express will not stay connected

    I have a new Airport Express (802.11n) and it will not stay connected to my MacBook Pro. Any suggestions?

    I have returned the Express and reinstalled my Extreme. I found a "tip" page that suggested to put a sheet of aluminum foil behind the Express to concetrate the signal inside the house. This crude idea has not solved the problem. My MacPro is a 2 GHz Intel Core i7. Any further suggestions?

  • TS1369 I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not in itunes. At this point my ipod is connected to my computer but when it finishes syncing it's no

    I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

  • Will not stay connected to my home wi-fi

    My iPhone will not stay connected to my Airport Express. My iMac and PB have no problem. Where I live I do not get any other wi-fi signals.
    In the morning my phone connects...I check my mail and check a few web sites. No problem for about 5 minutes or so then I loose the connection and it switches to AT&T's Edge service. The phone will re-connect when I go to setting>wi-fi But it only stays connected for 30 seconds or so. It will say "unable to connect" and I do renew the lease.
    This has been happening for about 3 weeks now.

    Have you tried deleting the saved wireless network settings for this network from your iPhone followed by reconnecting to the network?
    If not, on your iPhone go to Settings > Wi-Fi.
    Select the right facing arrow in a blue circle icon to the right of the name of the network.
    At the top, select Forget this Network.
    This will delete the network and network settings from your iPhone.
    Follow this by selecting and reconnecting to the network.

  • Wifi will not stay connected after Lion upgrade - help?

    I upgraded to Lion last week on my iMac and now my computer will not stay connected to wifi...  it is fine if I restart my computer, but then it looses its connection, settings when it goes in to screen saver mode - very frustrating, please help!

    This has been well discussed on another thread here: https://discussions.apple.com/thread/3191630?start=2055&tstart=0
    (There appear to be no moderators on these forums to make sure that new threads with the same topic don't get linked to a parent !?)
    Anyway... The issues appear for many to be related to a specific Airport card type & firmware version.
    I've had constant disconnect problems with my Mini since upgrading to Lion.
    My Airport card specs are:
      Card Type:                              AirPort Extreme  (0x168C, 0x86)
      Firmware Version:                    Atheros 5424: 2.1.14.9
    Connecting to my Time Capsule distributing on:
              PHY Mode:          802.11a
    The Atheros firmware version appears to be the issue depending on certain wifi network conditions.
    After some playing about today I think I've managed to force my Mini to connect on a better frequency, without having to roll back the firmware to the Snow Leopard version or mess with the Mini Airport card settings (via Terminal) by changing some settings in my router (Time Capsule).
    These are the changes I made:
    Airport Utility > Wireless > Wireless Options
    Set Radio Mode to 802.11 a/n - b/g instead of 802.11 a/n - b/g/n (Automatic)
    Set 2.4 GHz Channel to 13 instead of Automatic
    Set 5GHz Channel to 48 instead of Automatic
    My Mini now connects on:
    PHY Mode:          802.11g
    Signal / Noise:          -64 dBm / -96 dBm
    Transmit Rate:          54
    instead of previously
    PHY Mode:          802.11a
    Signal / Noise: -73 dBm / -96 dBm
    Transmit Rate: 36
    This appears now to be stable (no drops in the last 4 hours). It's a low transmit rate still, but better than before.
    The iMac is still connecting on
    PHY Mode:          802.11n
    Signal / Noise:          -69 dBm / -88 dBm
    Transmit Rate:          216
    and all is right with the world (hopefully for the long term)

  • Iphone will not stay connected "invalid response received from the device."

    I have an older iPhone (8gb) and for some reason whenever I plug it into the usb port on my computer it will not stay connected whatsoever. Itunes freaks out, it'll come up for a little bit and then just as soon as it appeared, 'Josh's iPhone' disappears. When I say "won't stay connected" I mean you'll hear the "new usb device" sound over and over again continuously and the iPhone goes crazy too. Like it's connected, disconnecting, connecting, disconnecting, etc.. The error I get during all this madness is "itunes could not connect iPhone because it received an invalid response from the device."
    I've used this ( http://support.apple.com/kb/ts1286 ) link to no avail (yet.) I am about to restart my computer right now. If it works after that I'll just simply delete this post. But anyway it's in a usb 2.0, it's plugged directly into the computer, etc etc
    Also I'm not sure if this has anything to do with it but I put ringtones on the phone as well, I tried adding about 5 or 6 of them through itunes and it only uploaded two of them, except one of those two appears FOUR TIMES.
    Thanks in advance for anyone who can help!

    Okay, after the updates I am still having the same problem. I'll try explaining it as detailed as possible, hoping somebody has an answer because this is pretty weird to me.
    -I have 5 files, Ringtone1.m4r, Ringtone2.m4r, Ringtone3.m4r, Ringtone4.m4r and Ringtone5.m4r.
    -I add them to the "ringtones" section under "Devices"
    -ON ITUNES they show up perfectly fine. In order, and if I play them through itunes, all the ringtones are correct, just how they should be.
    -I eject iPhone, go to settings > sounds > ringtone, and under custom, what I see is:
    Ringtone1
    Ringtone1
    Ringtone1
    Ringtone1
    Ringtone1
    Why on Earth could this be?

  • Ipod will not stay connected for more then a few seconds

    I was going to update my nano this morning after downloading the newest version of software, and first off it said the firmware was corrupt. so then I restored it, and it would not restore to the new version so i used the older version. the ipod seems to work in my hand but when i connect it to my computer it will not stay connected for more then a few seconds, then it ejects its self, but itunes still shows it as being there even though the rest of the computer does not
    I have not had any issues with it since i bought it which was last june.
    any ideas?
    John

    Hi John,
    I would suggest, with your iPod disconnected, that you force your iPod into disk mode (following the instructions in this article)
    Connect your iPod to your computer.
    Then, try restoring it in iTunes while it is connected in disk mode.
    Can you successfully restore your iPod?
    If so, when the restoring and resyncing process is all complete, now update your iPod to the latest firmware.
    Any success with trying that?
    -Kylene

  • My Iphone will not accept the Apple airport express as the Wi fi network so I can facetime, how do I fix?

    My Iphone (I have a 4s and 3G) will not accept the apple airport express as the wi fi network so that I can face time. How do I resolve this?

    What are the exact specifications of the wireless network you've created? (If you're not sure, open Airport Utility on your computer and check the Radio Mode in the Wireless tab). Bear in mind:
    - iPhones earlier than the iPhone 4 cannot connect to an "n-only" network - they need b/g compatibility.
    - No iPhone can connect to a 5GHz network (Compatibility mode will also fix this).
    Matt

  • Under Yosemite iMac will not stay connected to ethernet network

    Mac OS X 10.10.1
    When attached to Netgear Prosafe gigabit unmanaged switch (circa 2007) iMac Retina, Mac Pro, Macbook Pro will not stay connected to Apple Airport managed ethernet LAN. With Sys Prefs Network panel open I can watch the ethernet connect and disconnect on a periodic basis (about every 15 secs!). When same machines are connected to ethernet ports on the Airport itself, connections are steady and permanent. I suspect incompatibility with networking protocol used by Netgear but assuming their protocol is standard the incompatibility must be in Yosemite. Did NOT have this problem under Mavericks with any of my machines.
    Is my only alternative to order a new gigabit switch? If so, have protocols changed in the intervening 6 years such that Yosemite is not compatible with older switches?

    Well, my 6 year old netgear gigabit switch must have been partially failing because when I replaced it with the current model (same specs, same model name, but sold as an updated model??) things are now going fine. Getting gigabit network speeds on all computers and 100% reliable connection. Guess it was just a coincidence that my Yosemite update and the switch failure occurred at the same time.

  • My Itunes will not stay open, I have uninstalled it and reinstalled it and it still won't stay open

    My Itunes will not stay open. Everytime I open it it just gives me a wait signal and then closes down on it's own. I have uninstalled it and reinstalled it and it still won't stay open.... what should I do now?

    Try removing the Genius database.  In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

  • After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)

    After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)

    I have exactly the same problem. I too have tried everything that's been suggested, but still not working. Don't really what to do next? I have an iPhone 4S.

  • My Macbook will not stay connected to the internet, while my Dell computer works fine. Why? What can I do?

    My sister and I both have Macbook Pros that will not stay connected to our internet (wifi). Our dell computers and HP computers in the household work great- but both of the Macs do not stay connected, and often say "you are not connected to the internet". I have saved our wifi name to the computer so it is registered as our home network- but it still will not work fast or stay connected for long periods of time. Is there a setting I need to change, or anything I can do? Very disappointed with how the Mac works with our wifi.

    Mac's will have trouble connecting to WEP Encrpyted and/or "hidden" / "invisible " networks.
    OpenWEP (insecure) or WPA2(AES) is the only secure standard.
    ..WiFi, Internet problems, possible solutions
    WiFi security issues, at home and WiFi hotspots
    Also make sure the date and time are current and updating to Apple's servers for your location in System Preferneces > Date and Time. Then reboot and reconnect.
    If your still having trouble after this, take both machines back to the store for a free evaluation.

Maybe you are looking for