ITunes window name change

In iTunes, the name of the window (in the middle at the top) should be "iTunes" but when I updated iTunes and was doing something else at the same time, I accidentally made the window name some random word and I have no idea how. It appears on the bar at the bottom of the screen too. How do I get this back to "iTunes"?

The name of the iTunes window is normally the name of the folder holding the iTunes library. It would seem you've somehow renamed this folder, then managed to open the library in the renamed folder rather than correcting the rename.
Close iTunes, rename the library folder back to iTunes, start iTunes, browse to the iTunes folder and open the library file within it.
tt2

Similar Messages

Email/iTunes account name change

How do I change the iTunes account/Apple ID that backs up my iPhone? The email address has changed and I can't find a way to redirect it.

Your purchases are permanently tied to the Apple ID (account) used to purchase them. They can't be moved to another account and you can merge accounts. You can start making new purchases with your iCloud ID if you want, but you will end up with two sets of purchases under two different IDs, adding further complication to your life.
Also, your @icloud email address is an alias of your existing @me address; emails sent to either address will be routed to the same inbox. You can decide which one you want to use as your default (as discussed here: http://support.apple.com/kb/HT5441) but you can't separate them.

I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes

I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes, and Itunes can't find my Ipad. [email protected]

Ok, if reinstalling iTunes as suggested above does not resolve the issue of iTunes recognising the iPad then try this -
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are no faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/
As for making your new laptop your 'home computer' follow these instructions -
1. Without connecting your iPad to your computer -
A) Install iTunes / make sure the latest version of iTunes is installed.
B) Go to the Store tab and click on "Authorise This Computer".
C) Go to Edit, click on Preferences [iTunes and Preferences on Macs] and click on Devices. Put a check mark in the box next to "Prevent iPods/iPhones/iPads from syncing automatically". Click OK and close iTunes.
2. Connect your iPad to your computer -
A) Start iTunes (it will not start automatically because of the action at 1(C) above).
B) Right click on your iPad under Devices in the left column. Select "Transfer purchases".
C) When the transfer has completed, right click on your iPad again and select "Backup".
D) When the backup has completed, left click on your iPad, click on the Apps tab, and put a check mark in the box next to "Sync Apps", and then click on "Apply" (bottom right).
E) Unless you want to always do a manual sync (as I do), go back to Edit, Preferences [iTunes and Preferences on Macs] and uncheck the box next to "Prevent your iPod.....".
F) Finally, on your iPad, check that everything is syncing properly. If not, go back to iTunes and check all settings.
NB You should not lose any apps. However, any 'purchased' missing apps can be downloaded again FOC. As with updates, this must be done with the Apple ID under which they were originally 'purchased'.
Also see here as to moving your music to your new computer -
http://support.apple.com/kb/HT4527

Changing Variant Pop up window name in Portal for BI reports

Hi All,
I have integrated Bex analyzer with portal, from which when i select variant it will open pop window to select options.. here i want to change the pop window name as " sale order report name itself. I have changed the name of the report and it is showing in internet explorer...
when i select variant...im getting Bex internet explorer name, instead of sales order report name.
Please suggest where can i change this settings in portal or BIW level.
Thanks
Pradeep

See if this link helps
http://www.vrusso.com.br/blog/2011/03/unobtrusive-confirm-javascript-replacement-with-jquery-ui-dialog/Effectively you are calling a jQuery dialog box with custom buttons and events. Optionally you can hide the close button(or even the titlebar) and prevent closing the modal window when escape key is pressed.

How do I change the itunes user name on my iphone?

How do I change the itunes user name on my iphone? When I attempt to purchase an app or update the existing ones, the previous owner of this iphone has their information displayed and asks for the password as their user name is automatically prompted?

The apps are tied to the account from which they were purchased. If the apps were purchased from the previous owners account, then they would have to be updated from that account. you should not have these apps anyway. You need to buy your own.
Read the manual. it will tell you how to sign into your account to buy apps.
iPhone User Guide (For iOS 4.2 and 4.3 Software)
I would suggest restoring as new.

How can I change my iTunes Account Name to something different from my Billing Information Name?

I have an iTunes account using a relative's credit card. As a result, my iTunes Account Name is changed to her Name in the Billing Information.
Can I change my iTunes Account name to something different from the Billing Information Name?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

If you want the shuffle to be always visible in Windows (outside of iTunes), you need to Enable disk use.
Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, select the Summary tab. You should see a checkbox that says Enable disk use. Check it and click Apply.
NOTE: If disk use is enabled, you have to Eject the shuffle in iTunes, BEFORE you physically disconnect it. If disk use is NOT enabled, you can disconnect the shuffle at any time, as long as iTunes is not doing something with it at that moment (such as syncing); the shuffle's light will then be blinking (to indicate DO NOT DISCONNECT).
So, unless you want to use the shuffle like a USB flash drive (carry random files on it), you may want to NOT Enable disk use.

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes. What next? I've not had this problem with other updates requested by Apple.

I have also had the same problem with my Win 7 32 bit computer. I had great help from Apple techs in Montreal and Orlando for 2.5 hours. They helped me remove every trace of Apple products and clean the registry in two different ways. Each install gave the same problem! If Apple techs can't fix it (on some of our machines) then we are really in trouble. They promised to raise it with the "engineers" and get back to me with a solution. I am waiting and hoping. Otherwise maybe version 11.1.5 will have a fix ??

HT1386 After syncing with itunes(windows), messages for one of the contact(I have saved the contact name as 'Unknown') are lost. I can see only few messages which fits to the screen. I don't see option to load earlier messages.

After syncing with itunes(windows), messages for one of the contact(I have saved the contact name as 'Unknown') are lost. I can see only few messages which fits to the screen. I don't see option to load earlier messages.
Can anyone help.

Can anyone help on this?

[partiallySOLVED] changing window name of running urxvt

Hi,
Is it possible to change the window name of an running urxvt-terminal via external script (as in: not running in the urxvt-terminal itself)?
I have no idea how i could do that ... is it even possible at all?
EDIT:
Why?
To change the name/title of a urxvt-terminal running mcabber when a new incoming message is detected ...
Thanks, atcq
Last edited by atcq (2009-04-24 12:53:41)

sure.. this is true for the first start of the terminal ... and you can also do that by using the -name NAME option of urxvt!
i wanted to change a specific terminals (say started with the -name mcabber option) window_name!
found a solution which doesn't work with openbox , had it tested by someone running debian and xfce ... maybe it works with arch and xfce, too!
no idea why it won't work in openbox though!
you need community/wmctrl
pacman -S wmctrl
to use it in mcabber:
~/.mcabber/mcabberrc
set events_command = ~/.mcabber/eventcmd
set events_ignore_active_window = 1 # not necessarily needed!
needs to be set
~/.mcabber/eventcmd
#!/bin/bash
# testing if message is an incoming message from JID
if [ "$2" == IN ]; then
wmctrl -r mcabber -T "new msg from $3 - mcabber"
fi
# resetting window_name to default if all messages are read
if [ "$1" == UNREAD -a "$2" == 0 ]; then
wmctrl -r mcabber -T "mcabber"
fi
exit 0
instead of changing the name of urxvt, i now use notify-send with xfce4-notifyd to notify me about new messages in mcabber ...
maybe it helps someone else ... i'm fine with notify-send!
Last edited by atcq (2009-04-24 12:52:06)

Saving/exporting issue in Windows 7-file name changes when trying to navigate

I just got Windows 7 on my computer and am running ID CS5. The weirdest problem happens when I try to save as or export a file. The dialog box comes up and normally, I would be able to select a folder I want to navigate to just by typing the folder name, but what is happening is that the first letter goes to a folder, but upon typing the second letter, it starts changing the name of my file.
So for example, I am saving a file ABC.indd and I go to navigate to save it in a folder called Project XYZ. When I type in "P" to get to that folder name, it jumps right to the first folder starting with P. However, upon typing "r" my file name changes from ABC.indd to "r.indd." If I kept typing, it would become "roject XYZ.PDF."
This happens when saving as a file or if I am exporting a PDF. Our entire marketing department or 6 people was recently upgraded from XP to 7 and we all have this problem in ID. This does not happen in Illustrator or Photoshop and it has our IT department baffled. It is driving us crazy though because we make dozens of files a day and now have to manually scroll through long file structures when exporting PDFs, which is so time consuming, not to mention aggravating.
In searching for this problem, I found another poster on a different website who has the same issue, but no one had any suggestions.

Tell whomever is emailing the file to zip it first.

Where to change window name of webhelp output

RH8 HTML
I want to change the name that appears in the window name of the webhelp.
i.e when browsing the adobe forums the window name that apepars in your browser is Adobe Forums: Forum: WebHelp.
where can I change this, or where does RH pull this info from.
Thanks.

Nevermind, found it.
for those who want to know.
File > Project Settings > General Tab > Project Name.

Sometimes when I open itunes it will change my computer name.

I've been having a problem with my computer changing names on its own. It will change from "name" to "name"(2) and so on. I found a thread that said it might be a Bonjour issue so I toggled bonjour in the following way
To turn Bonjour off:
sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist
To turn it back on:
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist
This didn't help with my issue. now I've notice that it will sometimes rename itself once I open iTunes or wake it from sleep. any thoughts or help would be greatly appreciated. thanks

I got an error telling me iTunes couldn't find my iPhone so I quite iTunes and restarted the application. I was then prompted with the computer name change message. I turned off iTunes sharing, but I'm still having the issue. I think the issue is most likely iTunes and/or something with syncing my phone. My Mac Mini is also showing up on itself as a shared computer??

How do you update file name changes made it iTunes to the actual file?

I have changed some song names in iTunes but these change are not being made to the actual file. It worked yesterday when I changes the file name in iTunes the file name was also changed. Can someone please give me some advice.

Now it's taking hours for emails.
Not good.
Bob

Airport express name change, not showing properly in iTunes

I needed to swap the location of two Airport Express units, and I renamed them accordingly. They show up properly within Airport Utility/OS X, but within iTunes they seem to be cached to their old names. How do I reset them, flush the cache, or simply get them to show properly within iTunes?

I had the same problem and finally worked it out!
Go to the _AirPort Utility_, click on the *Airport Express*, click the *Manual Setup* button and click on the Music icon at the top. You'll see the "iTunes Speaker Name", which relates to the name in iTunes...

ITunes window name change

Similar Messages

Maybe you are looking for