ITunes window stuck at the top - cannot resize the window
Is this part of some glitch that's running around?
When I open iTunes (11.2.2 running on 10.9.3) - the top bar is extended above the top of my screen - so I can't resize it - the red, yellow and green buttons are all out of sight - above - and I've tried everything to get them back - everything is cut off at the top.
Any simple solution, I'm sure?
So this is what it looks like - and it's not on full screen mode - I can't access the red, yellow or green buttons to resize - I can resize the sides and bottom - but can't click on the very top to drag it down - and when I play music - you can't see what track is playing or the scrub bar (?) - only if I then go into full screen mode. But no matter what I do - iTunes always opens stuck at the top.
Similar Messages
-
Cannot resize the albums in album view in Itunes 11. For those of us with large libraries (160gb), this is extremely frustrating. I want to make the artwork smaller. This seems to be a serious oversight.
I agree.
It was very useful to reduce everything to small and quickly scan down looking for missing artwork.
Particularly useful when I only connect to the machine with iTunes via screen sharing, so everything can be a bit slower to scroll through at times.
In fact, itunes 11 when used purely as a server for Apple TV etc is a downgrade in usability IMO, as they've got rid of some of the useful views that helped me manage my library remotely. -
itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?
Time to replace it: $49 2nd Gen shuffle at online Apple Store...
-
In itunes, pressing alt to display the menu bar totally worked for my windows running machine but I CANNOT get the menu bar to show in itunes on my imac. what's with that?
You got me experimenting ... and it was viewing the display with the green button (rather than amber) on the left that revealed the menu bar. Hovering didn't do it. Thanks for your help. First time in Apple Support.
-
Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.good
-
Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
(NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
(NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
(NAND) WMR_Start: 149 apple PNN NAND Driver, Read / Write
(NAND) WMR_Start: 174 FIL_INT (OK)
(NAND) WMR_open :371 vfl_open (ok)
(NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
(NAND) WMR_open:420 FTL_open (ok)
(NAND)_publishServices:642 FTL capabilities: 0x00000001
(NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
(NAND)_fetchBorrowedList:881 number of borrowed blocks 16Hi Guys!
I'm German, so my english writing might not be perfect
I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
I almost gave up, thought the Logic Board was bad.
BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
Long story short, on mine the front facing camera, and sensor assy were bad.
Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
If so, i can live without the sensor and front cam.
Just wanted to share, good luck everyone. -
i downloaded 3 songs to my pc and sync'd my ipod and the songs do not tranfer. is this related to not having the proper itunes version vs ios? I cannot get the songs to sync, but I can move other songs to different playlists and they sync fine...any ideas what's wrong?
Hi Dennis!
I have a couple of steps for you to try in order to get those songs transferred to your iPod touch. First, make sure all of your software is updated with the latest versions. If the songs were downloaded from iTunes, you will also want to delete the songs from your library and then download them again from the list of past purchases on your iTunes account. An article about doing that can be found here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you try a sync after those two steps and are still seeing the issue, then I would like you to try syncing the iPod by setting it to manually manage. An article outlining more information on manually managing your iPod sync can be found here:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
If you are still having issues after that, I have another article that can outline some other reasons why your songs may not transfer to your iPod, and it can be found here:
Some songs in iTunes won't copy to iPod
http://support.apple.com/kb/TS1420
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?
Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry -
Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003
I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks. -
RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."
Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
a fresh win 8.1 enterprise install on a Hyper-V VM.
I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
event log says:
Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
"C:\RSAT Windows8.1-KB2693643-x64.msu" ")
CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
You can also re-try downloading the files to see if your original download was just corrupt.
Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
It was a permissions issue! Thanks so much Bruce!
I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
1) double clicked the installer.
2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
3) Installation was successful.
Not really sure why this happened as it doesn't make sense but it's working now :-) -
The system cannot find the file specified.Windows sockets error code:2.
Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain -
whenever i try to sync iphone5(version8.0.2) with itunes 12 on macbookpro.it appears cannot sync the purchased items on itune store. authorize your computer.i authorized it many times. but same response comes again to authorize.
If you are sure that you are authorizing the correct account/ID then:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases -
Selecting (and resizing, for example) a layer under the top layer via the Program Monitor
Hello all.
Using CS5
I am in the timeline and have selected layer 1 which is a video layer
Layer 2 is a title layer.
I want to manually resize layer 1, via the Program Monitor.
But when I go to the Program Monitor and select it Layer 2 (the title layer) becomes selected, preventing me from selecting and manually resizing/repositioning Layer 1.
The above example is a simplified version of what I usually find myself doing. Usually I have many layers above a layer that I want to resize or reposition (or do something else) but when I try to resize or repositon via the program monitor I am only able to manipulate the top layer.
Any suggestions, other than locking every layer other than what I want to resize etc .?
Thanks
RowbyHi Bill,
No they are separate orginal tracks.
Is there a way to "select" a layer below the top layer via the Progam Monitor -- and perform modifications on that lower level -- such a manually resizing on the Program Monitor. I find if I want to do it via the Program Monitor I have to temporarily lock the top layer.
And if I have lots of layers above the layer I want to manually resize, I have to lock all of the layers above that layer so I don't start moving around (for example a title layer which might be the top layer of the sequence) in order to manually resize via the Program Monitor.
I know (for example) in the case of scaling or repositioning a layer I could do it via the effects control panel, but I often want to do it via the Program Monitor.
Rowby -
The icon appeared when I "grabbed" the top of my iPhoto window to move it across the desktop. I don't want to delete important files, and wonder what I should do about the icon.
I am using Time Machine.Thanks LarryHN,
I have iPhoto version 9.4.3, and the "Rebuilt Library" icon is on the desktop.
Interestingly, when I closed iPhoto in order to perform the option startup, I got the spinning beachball and had to force quit—when I reopened, using the option key, a window did ask which library to use—I chose the rebuilt library.
I moved the "Rebuilt Library" icon to the iPhoto Library folder.
Thanks again!
Phill
Maybe you are looking for
-
I can't update itunes. I get error message can't find "itunes.msi". What can I do?
What can I do to download updated itunes. I get error message can't locate "itunes.msi." folder.
-
please help my ipod out of this rebooting loop the update doesnt work
-
Dell 14z to 24" ACD - Will this work?
Hi, I was thinking of getting a Dell 14z laptop which has a DisplayPort out. I found this product online: Mini Displayport Female to Displayport Male Adapter Cable. I could then use a 24" ACD, correct? Here is the link: http://estore.circuitassembly.
-
IPAD Movie Sync Extremely Slow
Everytime I sync a movie to my IPAD it takes about 45 minutes to sync. Please help !!!!!!!!!!!1
-
Nokia 7373 searching for IM + Yahoo settings
Hi there, I'd like to use the IM program that comes with my Nokia 7373 phone. Like I do with my Nokia 5300 phone. I'm tired of this WAP stuff (to me it's too slow). Does anybody know what the server address of the Yahoo's messenger service is ?