Itunes, wireless networking and Airport Express

Hi,
I currently have an AEBS and I am considering getting an Express to extend my network and stream iTunes to my stereo. My network is wireless for my Laptop and hardwired into my two desktops.
I know that I can set up Airtunes, but sitting near my stereo is a small hub (thats connected to my AEBS) that feeds media to my Xbox media centre. Can I connect my Airport Express to this hub via ethernet to receive iTunes then using the speaker cables feed music to my stereo or will it only work wirelessly in Airtunes mode?
Also, can you extend the wirless network with your Express by having it wired into this hub then re transmitting the wireless signal or will wireless netwrk extending only work completely wirelessly?
Thanks

Hi Martin,
what a co-incidence - i just bought an IMAC and also have the thought of archiving all my CD's (about 1000) on some kind of harddisc-server, and then be able to access this archive via my Imac (wirelessly), and stream the music to my Hifi system and feed it into my Digital/Analog Converter. Do you think the time capsule wld be ideal for the function of storing/archiving and streaming to the hifi system..? I guess I also need a seperate "Airport Express", as it has an optical- digital output into my Digital/Analog converter...
Thanks for your thoughts and kind regards from Singapore !
Thomas

Similar Messages

Extend wireless network with AirPort Express

How to extend the wireless network with AirPort Express and Belkin PlayMax as the primary router ?

How it work if I have an AirPor Station and 4 Airport Express, I actually also have an old TimeCapsule and an old AirPort Express. Can I cover all my house (around 300 m2). And will the old Airport slow down or convict with the new ones?

How do I extend an existing wireless network using airport express?

Hi all,
I am trying to extend existing wireless network using airport express, my main router is Belkin

Unfortunately, Apple's "extend" feature is designed to only work with other Apple routers if you are trying to "extend" using wireless only.
It is extremely unlikely that this feature would work with a router from another manufacturer using wireless only.

Wireless modem and Airport Express.. one at a time

Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
I'm sure I'm just missing something in preferences or settings somewhere.
Can someone point me in the right direction?
Thanks, and Happy New Year!

No ideas?

Wireless Broadband and Airport Express

Where I used to live I had ATT DSL and used my Airport Express to provide a wireless network and the use of my non-networked Samsung printer. My new address won't have DSL or Cable--but there is Verizon wireless broadband. Is there a way I can more or less duplicate what I had with the DSL and the Airport Express? I sure would like to be about to print without having to physically attach the USB printer cable to my MacBook? Thanks in advance for any suggestions.

Hello,
The idea behind the Cradlepoint CBA250 adapter (which I have not tested) is to create an Ethernet output from a USB (or ExpressCard) modem or a mobile phone. This combination would thus effectively replace a DSL modem that has been connected to a WAN port of a wireless base station. If your AirPort Express was used as a base station, and was working with a USB printer earlier (much like this), everything ought to be as before.
Jan

Connecting wireless modem and airport express

I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
Mac

Hi - I have a similar issue.
I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
All three are wirelessly connected to my HG556a Huawei WiFi Router.
The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
It still dissapears from available options in iTunes and AU. ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

Extending Gen 1 Time Capsule Wireless network with Airport Express N

I am having difficulty setting up my new Airport Express w/ 802.11N (SKU# MB321LL/A) to extend the wireless network from my Time Capsule (SKU# MB276LL/A).
My setup is as follows:
Time Capsule is connected to Cable modem with the following wireless settings:
Wireless mode -> Create a Wireless Network
Allow this network to be extended -> Checked
Radio Mode ->802.11n (5Ghz N only)
Wireless Security -> WPA2 Personal
The issue is the when I attempt to setup the AE to extend the network. I match the settings to the Time Capsule:
Wireless Mode -> Extend a Network
Select the Time Capsule Network
Allow wireless clients -> Checked
Wireless Security -> WPA2 Personal
However after I reset the AE the LED glows Amber and the following problem is reported:
+Wireless Network+
+This AirPort wireless device is set up to join a specific wireless network that can't be found. If you don't see the network that you want to join in the Network Name Pop-up menu, enter the network name and network password if necessary to try again.+
When I check the Airport->Wireless tab the settings were as before.
Any thoughts on this? Thanks.

Welcome to the discussions!
Have you tried to position the AirPort Express close, say 10-15 feet, as a test to see if it will connect that way?
If so, then move it back another 10-15 feet, etc.
5 GHz signals do not travel well or penetrate surfaces very well, so my first thought was that the signal was not strong enough for the Express to pick it up where you had it located.
Message was edited by: Bob Timmons

How do I set up a wireless network using Airport Express

I know very little about networking but want to set up a home network so I can distribute my music in the home using iTunes and AirPort Express units. I am hoping to control the music using Remote on iPod touch. I do not have a network setup or anything. What are the step-by-steps?
Thanks.
Billy

http://www.apple.com/airportexpress/setup.html should get you going. The on screen instructions for the Airport Utility are very simple and easy to follow.
iFelix

Extending Wireless Network with Airport Express / DLink Wireless

I have a DLink wireless router WBR-1310. I own two Airport Express 802.11n's. Can anyone help me out with how I can properly set-up an extended network with these products? All help is greatly appreciated.

You would need one AirPort Express located near the D-Link router and connected to the D-Link with an ethernet cable. This Express would be configured to "create a wireless network" and "allow this network to be extended"
If you have two areas that need more wireless coverage, you would locate an AirPort Express approximately 1/2 the distance between the "main" AirPort Express and the area that needs more wireless coverage.
Then do the same with the second area that needs more coverage.
Without knowing your room layout, I can't honestly tell you whether you need only one "extending" Express or more than that.
It will help to remember that the "extend" setup works like the hub and spokes of a wheel. Your "main" Express connected to the D-Link would be the "hub". Each of the "extending" Express devices would be at the end of a spoke. The Express devices at the ends of the spokes communicate directly to the hub, not to another Express at the end of another spoke.
So, to work well, hopefully your D-Link router and Express will be located in a central area of your home so the extending devices will work around the perimeter.
I would recommend that you study Apple's support document on extending wireless networks before you make a final decision on what to do.
http://support.apple.com/kb/HT4145
Finally, consider if you can connect the two Express devices you have now back to the D-Link using ethernet cables. This would provide much better performance than a wireless only situation.

Extending my Linksys Wireless Network with AirPort Express

I would like to add an Airport Express to my wireless network to extend my wifi range and add AirPlay to my home theater system. Can Airport Express be used to extend my current wireless system that is not an Airport Extreme devise?
Also, by adding the Airport Express does this now limit the number of devices I can have on my wireless network to the 10 even if the Linksys supports 50?
Thanks for any advise...

Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your non-AirPort router can be extended wirelessly with the AirPort Express Base Station (AX).
The few that are known to work are:
another Airport Express Base Station
802.11g Airport Extreme Base Station (AEBS)
802.11n AirPort Extreme Base Station (AEBSn)
Linksys WRT54G or WRT54GS (not v5)
Belkin F5D7230-4 and F5D7231
BT Voyager 2091
Netgear WGR614 v6
Buffalo WGR-G54

Will extending a wireless network using airport express cause weaker signal?

Hoping someone can advise on the following please....
I have installed an Airport Express to extend my wireless network and have confirmed with Apple tech support that it's connected and configured properly. I'm using an Airport Extreme base station as a wireless router.
The AX does not seem to be extending the signal range at all, and since the setup the signal strenght from the Extreme base station seems to be at half previous strengh.
Has anyone experienced this please and, if so, what's the fix?
Any replies gratefully received.
Regards

Let's check the settings on your Express. Temporarily, move it to the same room or an adjacent room to the Extreme and power it back up.
Open AirPort Utility - select the Express - Click Manual Setup
Click the Wireless tab below the icons and make sure that your settings look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Extreme wireless network
Check mark entered next to Allow wireless clients
Wireless Security = Same setting as the Extreme network
Wireless Password = Same password as the Extreme network
Confirm Password
Update to save settings, wait for green light.
Then move the Express another room or two further away from the Extreme....and restart both the Extreme and the Express. Then perform the BSSID test again.

Itunes crashes on addition of artwork to movie folder and apple tv (2nd generation) will not see itunes while itunes plays playlist over wireless network to airport express??

I have 4 non apple pc exhibiting same issue. Whether you have ten movies on board the pc or 500 on external storage Itunes locks up after you "get info" and try to add video cover from IMDB whether the art is in my pictures on PC or off USB key / external storage. Very frustrating to the extent that I bought a macbook thinking that it may be a non apple issue and bingo same issue whether films on macbook or on nas/ external usb. Effectively itunes may be made to crash by adding artwork!
2nd Issue noticed at weekend I have a small music library of approx. 35gb music in itunes music folder when a playlist was being played within itunes and airplay was selected to an airport express that is connected to distributed music system in house all works well during party. Guest have access to DJ app via remote app or control of content being player. My kids disappeared into the front room and while playlist on notices 2 things. The ipod touch ( 4 mths old) would not connect to apple tv player 2nd generation while airplay on to music system and the infra red remote remote worked fine but apple tv would not see video files in itunes while airplay on. When airplay disabled all absolutley fine , re- enabled airplay and apple tv bumped again. I have a wireless N router and have successfully had 2 apple tv 2nd generation working off itunes video files without issue. There are delays but both are seen in remote app and both players see itunes folders. I would have thought video streaming to apple tv players sucked up more bandwidth that one airplay to airport express and one apple tv 2nd gen.
Anyone experienced same

OK - I managed to fix this. Will document for others.
I started to think it was a firewall thing. So I turned off both my Windows 7 firewall and my BT Home hub firewall. It started working!
So turned back on the BT home hub firewall - still working. So it must be a windows 7 firewall.
Went in and checked that Itunes was there as an exception... Yep. So why still not working?
Found out that the entry in my Windows 7 firewall said I-Tunes - but when you looked at the details button it wasnt pointing to a program - it was just blank.
So added a new entry and pointed that at the I-Tunes exe file.
Now all working...

How can I extend my wireless network using Airport Express and an Airport Extreme on BT Infinity?

I have BT Infinity and I am using the Time Capsule with Airport Extreme as my router. Working well (even on wireless). I want to extend the wireless network with an Airport Express, but I cannot work out the settings necessary in Airport Utility. I am using Mountain Lion 10.8.2 on a Mac Pro. Please help!

BT,
I've read several of your posts, thanks for taking the time to share your wealth of knowledge.
I'm in a situation similar to the one described by 'scoutusmaximus'. Seeking the flexibility of a standalone router, I finally upgraded my 4-yr old ATT DSL gateway (modem+router) to a Comcast standalone modem + the ASUS RT-AC66U: http://www.asus.com/Networks/Wireless_Routers/RTAC66U/
Typically, I stick with all things Apple but the ASUS router seemed fairly superior to the current-gen base station (on paper, anyway; time will tell when it comes to performance) so, for once, I jumped ship. My plan was to extend the ASUS wired/wireless network using my TimeCapsule and 2 Airport Expresses in bridge mode, however, a google search turned up several unhappy customers that claim those devices don't play well with non-Apple routers, especially when it comes to 'extending' a network.
Questions:
1. Can I successfully extend the wired/wireless network created by the ASUS router using the 3 airport devices listed above w/out negatively impacting performance? I'd rather have 1 wireless network as opposed to creating a new wireless network with the TC and then extending it with the AP Expresses... though I'd consider that option down the line if it came to that.
2. Will the LAN ports on the TimeCapsule remain functional?
Btw, my house is wired so, I can reach all 3 devices via ethernet cable coming off of a central, managed switch. Supposedly, you only lose the LAN ports on the TC if you extend wirelessly.
Any advice would be appreciated.

Stream content from iTunes to AppleTV and Airport Express

I have an Apple TV in family room which is wirelessly connected to my home network. I also have a PC connected via Ethernet to my network. All my music is stored on an external drive connected to my PC (I don’t store any media on the ATV, as my music is well over 400GB). This setup works great, and allows me to stream content from the external drive to my ATV which is connected to a stereo.
Next, I purchased an Airport Express, connected it to a second stereo in my basement. After spending 3 hours trying to get it connected to my network, (I had to disable all wireless encryption, and use MAC filtering to keep network secure), I am now able to stream media from iTunes on the PC, to the stereo connected to the Airport Express.
What I would like to do now, is be able to select a song from the Apple TV (using ATV remote, or iPhone Remote), and have it play in both places. Since the media itself is coming from iTunes running on the PC with the external drive, and it gets streamed from there to Apple TV, how can I also stream the same content to the Airport Express?
The folks at the Apple store say this is a feature, but no one seems to know how to make it work. I have also read hundreds of posts online, and some say you can do this, others say you cannot. All of those who say it is not possible, state you cannot stream from ATV to AE, but in my case, the media is not on the ATV, it is on the PC, and I just want to use ATV to select the song. From there, it would be iTunes that would send the content to both the ATV and the AE.
Can someone help myself and many others put this question to rest - can it be done, or not?

Thanks for the reply. Just as you indicated, I figured out how to use iPhone remote to tell iTunes on PC to output to Express, Apple TV and PC, and that works great - I can even turn on/off any of the speakers from the iPhone - this is so COOL!
While you answered the question, I am curious about the architecture of all this...If the media is actually on the PC and is controlled by iTunes, isn't the Apple TV doing the same thing as the iPhone Remote - just telling iTunes what to play, and iTunes sends the content to whatever speakers are defined? Keeping that thought, if you can control iTunes via iPhone Remote, and the content will play on any speakers you select, then it would make sense that you could do the same thing with the Apple TV menu - tell iTunes what to play, and let iTunes send to whatever speakers you have selected.

Itunes, wireless networking and Airport Express

Similar Messages

Maybe you are looking for