Itunes won't detect ipad 2

I've installed and re-installed the latest itunes 64bit on my win 7 machine. yet itunes will not detect it.
I've tried multiple usb cables. tried differnt usb ports yet to no avail.
every so often it will detect and let me sync but 99% of the time its an everyday battle to get my ipad to detect on itunes.
I have an iphone 4 that seems to detect fine. yet i can't figure out why ipad 2 wont detect. I've even restored my ipad 2.
I've tried everything I can think of.
I even formatted my computer, download itunes and install it on a fresh system and same problem.
I'm at my wits end. I can't understand why its so hard to detect it.
device manager sees it fine. but itunes locks up when i connect the ipad 2. if I disconnect it, itunes becomes available. Everytime I connect my ipad itunes throws a fit and becomes unusable for like 5 min, a very long pause as it thinks about something.
anyone have a workaround for this?
I went to the apple store and a tech there told me, buy a mac, that will sole your problem....seriously?
then he said or uninstall and reinstall. which I've done several times, that does not fix the problem.

So glad I stumbled on this particular post. And unfortunate that no seems to have a solution. I have the EXACT same symptoms: brought back an iPad 2 tonight, and it took me about 10 times to connect/disconnect the USB cable, change port on the PC, change the USB cable, rset the iPad, etc, before iTunes would see it. The PC recognizes it fine, but iTunes freezes until I disconnect the USB cable. Very annoying.
I've also tried starting iTunes before and after connecting the iPad 2, to see if it would make a diff.
I was able earlier tonight to have it recognized, to sync everything up. But now it's acting up again.
PC runs the latest iTunes 10.2.1, iPad is now on the latest 4.3.1, and the PC as well as iTunes sees the iPhone 4 fine everytime, and runs smoothly otherwise for everything. I do believe the 'handshake' between iPad 2 -> iTunes is somewhat not working.
[ADDITONAL COMMENT] Forgot to mention: I had a iPad 1 before, and it was also working fine every time.
Message was edited by: canbbb

Similar Messages

  • Itunes won't detect ipad

    I plug in my iPad mini and the display screen says "not charging".  ITunes will launch, but will not detect the iPad to back it up or sync. 

    What version of iTunes are you using?
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

  • I have a new Ipad 2.  iTunes won't detect it.

    I have a new iPad 2, i need connect my iPad with iTunes to use. But iTunes won't detect it. I used lastest version iTunes and win7. When i connect iPhone 4 with my laptop, it's good. But it can't recognize iPad2. What's the probleme here?

    I have a similar problem, but it began when i installed iTunes 10.5.2.11 on my windows 7 computer and tried to install the latest update to ipad2 software.  Prior to installing the new itunes, i had been able to sync with itunes easily and as expected.
    After installing the new version of iTunes - the ipad2 began to act strangely:
    it did not charge correctly even when connected to OEM power adapter ("not charging" message appeared when plugged in)... this still appears to be an issue, though it does not happen all the time.
    the computer no longer recognizes the ipad device (i have tried different cables and it does recognize my ipod nano)
    i am afraid to reset the ipad for fear that i will still not be able to connect afterwards and i will have lost all the apps currently installed.
    Any hints on how to go about fixing this issue?

  • ITunes won't detect my iPhone 4

    I currently use a MacBook Pro with the 12.0.1 version of iTunes, however I also have an iPhone 4 and recently got an iPhone 5. In order to backup my iPhone 4 and put it onto the 5 i need to be able to sync, but iTunes won't detect my device (iPhone 4). I have completely uninstall iTunes so that I can install an older version that is compatible with my iPhone 4.
    So my question is, what is the latest version of iTunes available that is compatible with the iPhone 4 software of 7.1?
    All help is appreciated, thanks.

    For anyone else having this issue on OS X this post will fix it.
    Steps 7, 8 and 9 may not be required in Snow Leopard.
    http://discussions.apple.com/thread.jspa?threadID=2465013&tstart=0
    Reinstall the Apple Mobile Device Service:
    1. Disconnect your iPhone, iPad, or iPod from the Mac.
    2. In the Finder, locate iTunes in the Applications folder and drag it to the Trash.
    3. Move the iTunes icon to the Trash.
    4. Choose Go > Go to Folder.
    5. Enter /System/Library/Extensions and click Go.
    6. Locate the file AppleMobileDevice.kext and drag it to the Trash.
    7. Choose Go > Go to Folder.
    8. Enter /Library/Receipts/ and click Go.
    9. Locate the file AppleMobileDeviceSupport.pkg and drag it to the Trash. If prompted, authenticate with the administrator password.
    10. Restart the computer.
    11. Choose Finder > Empty Trash and restart the computer.
    12. Download and install the current version of iTunes.
    13. Connect your device to the Mac again and open iTunes & see if you can sync now.
    Message was edited by: kazop

  • Itunes won't detect all my music

    Itunes won't detect all of the music on my PC there for I can't transfer all of it to my Ipad.  Thoughts?

    Think I found the problem.  It appears that if you have music that is incompatible with the ipad and you don't have the automatic converter to AAC turned on itunes just stops there and won't load the rest of the music.

  • Itunes won't detect ipod...

    Hey all. I previously installed my ipod on my computer with all the software and it was working fine. It was working perfectly. I decided to return it to get a smaller version, but before I did that, I had to restore the factory settings. I later decided to keep the current ipod, but now itunes won't detect the ipod. I tried reinstalling the software numerous times and it didn't work. I also plugged it into a different usb port like the manual suggests but it still doesn't work. Can anyone please help? thanks.

    i love you whoever posted the thread in this link!!!!!!http://discussions.apple.com/thread.jspa?threadID=299830&tstart=90

  • ITunes Won't Detect My iTouch

    Hey guys, I know there have been a few questions about this. Basicly, I upgraded my iTouch to v2.0 on my laptop that's running Vista. When I took it over to my desktop since I usually use that computer, iTunes won't detect my iTouch. Is there any way do fix this BESIDES having to put my iTouch in DFU mode? I've already got a bunch of apps that I really like and I don't want to have to reget them all.
    Thanks

    Ok, so I've tried to put my iTouch in DFU mode since all else has failed and well, that fails too. I hold the sleep and home buttons then let go of my sleep button, but when I finish it all, iTunes doesn't recognize my iTouch as an iPod in DFU mode. Then, when I try to turn my iTouch on or make something happen with it, nothing happens. I tried to redo the DFU steps and after reputting it in to DFU mode it turns on and my iTouch is like it was before anything happened. Can anyone help? I can't get my songs and videos and pictures and all that stuff on my iTouch cause they're all on my desktop and my desktop won't recognize my iTouch.
    Thanks

  • ITunes won't detect iPhone4

    My iPhone wouldn't open my messages and each time I tried - it would crash.
    So I backed up and reset my settings, updated iTunes and ever since my iTunes won't detect my iPhone.
    I have tried all the troubleshooting options, uninstalled & reinstalled iTunes twice, and it's still not showing when I plug in my phone.
    MY phone keeps restarting, won't allow me to text, won't allow me to turn on my iMessages.
    Someone please help before I throw my phone against a wall.

    This may help:
    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for OS X

  • ITunes won't detect firmware 4.3.3 for iPhone 3GS

    I've read about the problem where it doesn't download it and you have to turn off the firewall etc.  However my problem is that it just won't detect it at all.  I check for updates and it says that my iphone is update to date which is running on a 4.2.1.  I even tried to manualy do by downloading the firmware and going into recovery mode on the phone and shift clicking restore but then it says that the firmware is not compatible with my phone.
    The phone is an iPhone 3GS not jailbroken running on 4.2.1.
    Running Windows 7 64bit.
    I have the most recent version of iTunes.
    I did the whole virus protection being off, firewall off and changing the host file thing.
    Nothing seems to work and I'm not sure what else to do here.  I thought perhaps the 4.3.3 firmware wasn't for the 3GS but reading about it seems it is so I'm not sure why iTunes won't detect it.

    Try getting it from here
    http://osxdaily.com/2011/05/04/ios-4-3-3-download/
    Download the version for your phone, then connect the phone to iTunes and hold SHIFT while clicking Check for Updates. You can then install the file you downloaded above.

  • My iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.2

    my iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.0.4

    If itunes is comming up and saying it can't read the device because it's locked with a passcode, you may have to put your device into recovery mode first.
    To put your device in recovery mode: (Following these steps will erase your device and reset everything to factory defaults)
    1) press and hold the power button until you see the slide to power off option
    2) swipe to power off
    3) Press and hold the home button while the device is off and connect it to your computer. Continue holding the home button until you see a graphic with the iTunes logo with a picture of a USB cable below it.
    4) iTunes should give you a message that it has detected a device in recovery mode. Click ok and then select Restore iPhone. iTunes will download a fresh copy of iOS and then wipe the device and restore it. Depending on the speed of your computer's internet connection this may take a while. Just leave the iphone connected to your computer until it's finished.
    If itunes is not detecting it at all or is Not giving you the message that the phone is locked with a passcode, you may end up having to reinstall itunes. This seems to be a fairly common problem after the most recent itunes update (11.1.5)
    If this is the case and you happen to be running a windows based computer you will have to uninstall itunes in this order from your programs and features option in control panel:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Then download and reinstall itunes from itunes.com try putting your device into recovery mode again and restore.
    Hope this helps.
    Cheers.

  • IPod Touch 2g heats up iTunes won't detect it?

    Hello there I have a iPod touch 2g it heats up when I try to charge it. Its not in warranty anymore sadly. I tried to do the DFU mode and iTunes won't detect it.
    I have iTunes 10 and am running windows 7.
    Please help

    I would make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    I suspect a hardware problem. Maybe a bad battery.

  • PC won't detect iPad. HELP!

    Hi everyone, i do really need some help from u guys. well my pc won't detect my ipad. the cable's fine (using it for charging) i even tried 2 cables but still same effect.
    but sometimes when i plug my ipad to my pc and reboot my ipad while plugged, a message pops out and said "usb device not recognized"
    so please help
    thanks in advance.
    i'm running iOS 5.0.1

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/

  • My iPod Touch is in Recovery Mode and iTunes Won't Detect It ?

    iPod Touch 4G
    iOS 5.1
    Purchased 2010
    I Opened Up iTunes and Upgraded to iOS 5.1.1 from 5.1 as a "Download Only". The Next Morning I Go To My Computer Plug In My iPod and Update. My iPod Then Goes into Recovery Mode and When I Quit Recovery mode It goes straight to recovery mode again with and without the cable. iTunes does not detect it when i plus it in and neither does my computer, i have tried restarting apple mobile support and that does not work. The nearest apple store is 20 miles but i could go there.

    See if you can kick it out of recovery mode with RecBoot.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • ITunes won't detect iPhone 5

    iTunes on my mac sync one of my iPhone 5 just fine. However, other one won't sync. It won't even detect in iTunes. I can see the sync symbol on the phone but itunes won't show the iphone in application. Here is the log file.
    Any help to resolve would be appreciated..
    Thanks, Nick.
    Marker - May 27, 2014, 9:56:07 PM
    May 27 21:56:10 tests-mbp.home iTunes[3112]: Entered:_AMMuxedVersion2DeviceConnected, mux-device:52
    May 27 21:56:10 tests-mbp.home iTunes[171]: Entered:_AMMuxedVersion2DeviceConnected, mux-device:52
    May 27 21:56:10 tests-mbp.home iTunes[3112]: tid:13633 - unable to query device capabilities
    May 27 21:56:10 tests-mbp.home iTunes[171]: tid:133b7 - unable to query device capabilities
    May 27 21:56:12 tests-mbp.home com.apple.usbmuxd[17]: HandleUSBMuxConnect Client 0x10020a7f0-AppleMobileDeviceHelper/com.apple.SyncServices.AppleMobileDeviceHel per requesting attach to 0x2e:62078 failed, no such device
    May 27 21:56:12 tests-mbp.home AppleMobileDeviceHelper[280]: AMDeviceConnect (thread 0x7fff7b985310): Could not connect to lockdown port (62078) on device 46 - 131dc6e7fa9259aec48dc28aa34588e1a1808a29: 0xe8000084.
    May 27 21:56:12 tests-mbp.home AppleMobileDeviceHelper[280]: 280:2073580304|DeviceLinkListener.c:_copyMobileDeviceValue| ERROR: Could not connect to attached device: This device is no longer connected. (132)
    May 27 21:56:17 tests-mbp.home syncdefaultsd[3329]: **** globally delaying apps from syncing, next sync will be in 1s
    May 27 21:56:17 tests-mbp.home AppleMobileBackup[3387]: WARNING: Backing up 131dc6e7fa9259aec48dc28aa34588e1a1808a29
    May 27 21:56:19 tests-mbp.home syncdefaultsd[3329]: **** globally delaying apps from syncing, next sync will be in 1s
    May 27 21:56:20 tests-mbp.home com.apple.usbmuxd[17]: _SendAttachNotification Device 98:b8:e3:74:7f:bd@fe80::9ab8:e3ff:fe74:7fbd._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.
    May 27 21:56:21 tests-mbp.home syncdefaultsd[3329]: **** globally delaying apps from syncing, next sync will be in 1s
    May 27 21:56:48 tests-mbp.home MDCrashReportTool[3395]: 3395:3674112|CrashReportCopierAFC.m:-[CrashReportCopierAFC copyAndProcessRemotePath:usingConnection:]| ERROR: Could not remove remote path at ./DiagnosticLogs/security.log.20140527T121006Z

    You're most likely connecting a mobile device with a USB cable that is either faulty or incompatible. Try another cable and disconnect all other USB devices. The device itself, the USB port on the Mac, or another device on the bus could also be at fault.

  • ITunes won't detect my iPhone!

    Can somebody let me know why my new iPhone 3G won't be detected on my iTunes using a regular USB cable??
    I have all the latest iTunes and I know my USB works on my regular iPod nano ... but it won't detect my iTunes to charge the phone.
    Any help is greatly appreciated. Thanks!

    This link may be helpful.
    http://support.apple.com/kb/TS1591

Maybe you are looking for

  • Gaming apps freezes for few seconds , then resumes by itself or crashes sometimes ,after upgrading to iOS 8.3 on iphone 6

    Gaming apps freezes for few seconds , then resumes by itself or crashes sometimes ,after upgrading to iOS 8.3 on iphone 6

  • XDCAM HD422 playback stutterings and blacks out

    When I import XDCAM 422HD clips into my PC based Pr6.01 or 5.5 machine, they will play once on the timeline, and strangely,  after that, they flash black or don't play at all.  I don't have the problem with EX files (I know they are a different codec

  • MacBook Pro using too much RAM

    I have  15" MacBook Pro, purchased in February, 2013.  It has 2.6 Ghz Intel i7 processor, 8 GB RAM and a 750 GB hard drive.  The HD is about 25% filled, mostly with photos.  It came with Mountain Lion, I upgraded to Mavericks, then to Yosemite.  I go

  • CS3 Datagrid Component

    There has to be some way to get an html link to work in a CS3 Datagrid. I can't find anything on html links using Flash CS3 and Actionscript 3, which seems pretty remarkable to me. I'm surprised Adobe didn't code the datagrid to recognize when an htm

  • Purchasing Super User not able to quiry Requisition

    Hi Can someone please assist me on these,why wouldn't the Purchasing Super User not be able to quiry some Requisition,....do we need to set them up as buyers? I get these FRM-40212: Invalid value for field REQ_NUM thanks Edited by: user12198087 on De