Itunes won't detect ipod...

Hey all. I previously installed my ipod on my computer with all the software and it was working fine. It was working perfectly. I decided to return it to get a smaller version, but before I did that, I had to restore the factory settings. I later decided to keep the current ipod, but now itunes won't detect the ipod. I tried reinstalling the software numerous times and it didn't work. I also plugged it into a different usb port like the manual suggests but it still doesn't work. Can anyone please help? thanks.

i love you whoever posted the thread in this link!!!!!!http://discussions.apple.com/thread.jspa?threadID=299830&tstart=90

Similar Messages

  • Itunes won't detect ipod touch after upgrade to firmware 1.1.4

    I am in desperate need of help. My 16GB Ipod is no longer being detected by iTunes.
    I decided to upgrade the firmware to 1.1.4. through iTunes. The update wasn't interrupted and i can see no issues during the procedure. when the update was completed, my iPod had no content in it and it wasn't showing up in iTunes.
    Here's what i've tried so far to correct this:
    - Uninstalled iTunes and all other apple related software and then re-installed
    - tried different USB ports on my laptop
    - Reset all setting within the ipod
    - Run the iTunes diagnostic. It error's out during the sync test.
    I've tried to find any other similar example on other sites but haven't been successful.
    Please help.

    These are other hints http://www.copytrans.net/helpcopytrans.php#22
    That might help.

  • Itunes Won't Detect Ipod Updates

    So Itunes easily detects my Ipod touch and I can manipulate/view my songs, hard drive, etc ad nauseum BUT when I hit check for updates it says my Ipod is already up to date. This is definitely not right since there is now iOS 4 and I'm currently at 2.2.1.
    anyone ever have this happen? it used to auto detect updates all the time now i cant seem to get it.

    Try closing out of iTunes and rebooting your Mac. Sometimes it helps in situations like these.
    It might be a good idea to re-install iTunes using these instructions to see if that doesn't help.
    http://support.apple.com/kb/ht1224
    What model iPod do you have exactly? You may want to double check this article once more to be sure you truly have a 2G Model. I'm not denying that what you are saying is true, I'm just trying to help and it wouldn't hurt to double check.
    http://support.apple.com/kb/ht1353
    B-rock

  • IPod Touch 2g heats up iTunes won't detect it?

    Hello there I have a iPod touch 2g it heats up when I try to charge it. Its not in warranty anymore sadly. I tried to do the DFU mode and iTunes won't detect it.
    I have iTunes 10 and am running windows 7.
    Please help

    I would make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    I suspect a hardware problem. Maybe a bad battery.

  • ITunes won't detect my iPhone 4

    I currently use a MacBook Pro with the 12.0.1 version of iTunes, however I also have an iPhone 4 and recently got an iPhone 5. In order to backup my iPhone 4 and put it onto the 5 i need to be able to sync, but iTunes won't detect my device (iPhone 4). I have completely uninstall iTunes so that I can install an older version that is compatible with my iPhone 4.
    So my question is, what is the latest version of iTunes available that is compatible with the iPhone 4 software of 7.1?
    All help is appreciated, thanks.

    For anyone else having this issue on OS X this post will fix it.
    Steps 7, 8 and 9 may not be required in Snow Leopard.
    http://discussions.apple.com/thread.jspa?threadID=2465013&tstart=0
    Reinstall the Apple Mobile Device Service:
    1. Disconnect your iPhone, iPad, or iPod from the Mac.
    2. In the Finder, locate iTunes in the Applications folder and drag it to the Trash.
    3. Move the iTunes icon to the Trash.
    4. Choose Go > Go to Folder.
    5. Enter /System/Library/Extensions and click Go.
    6. Locate the file AppleMobileDevice.kext and drag it to the Trash.
    7. Choose Go > Go to Folder.
    8. Enter /Library/Receipts/ and click Go.
    9. Locate the file AppleMobileDeviceSupport.pkg and drag it to the Trash. If prompted, authenticate with the administrator password.
    10. Restart the computer.
    11. Choose Finder > Empty Trash and restart the computer.
    12. Download and install the current version of iTunes.
    13. Connect your device to the Mac again and open iTunes & see if you can sync now.
    Message was edited by: kazop

  • ITunes Won't Detect My iTouch

    Hey guys, I know there have been a few questions about this. Basicly, I upgraded my iTouch to v2.0 on my laptop that's running Vista. When I took it over to my desktop since I usually use that computer, iTunes won't detect my iTouch. Is there any way do fix this BESIDES having to put my iTouch in DFU mode? I've already got a bunch of apps that I really like and I don't want to have to reget them all.
    Thanks

    Ok, so I've tried to put my iTouch in DFU mode since all else has failed and well, that fails too. I hold the sleep and home buttons then let go of my sleep button, but when I finish it all, iTunes doesn't recognize my iTouch as an iPod in DFU mode. Then, when I try to turn my iTouch on or make something happen with it, nothing happens. I tried to redo the DFU steps and after reputting it in to DFU mode it turns on and my iTouch is like it was before anything happened. Can anyone help? I can't get my songs and videos and pictures and all that stuff on my iTouch cause they're all on my desktop and my desktop won't recognize my iTouch.
    Thanks

  • I have a new Ipad 2.  iTunes won't detect it.

    I have a new iPad 2, i need connect my iPad with iTunes to use. But iTunes won't detect it. I used lastest version iTunes and win7. When i connect iPhone 4 with my laptop, it's good. But it can't recognize iPad2. What's the probleme here?

    I have a similar problem, but it began when i installed iTunes 10.5.2.11 on my windows 7 computer and tried to install the latest update to ipad2 software.  Prior to installing the new itunes, i had been able to sync with itunes easily and as expected.
    After installing the new version of iTunes - the ipad2 began to act strangely:
    it did not charge correctly even when connected to OEM power adapter ("not charging" message appeared when plugged in)... this still appears to be an issue, though it does not happen all the time.
    the computer no longer recognizes the ipad device (i have tried different cables and it does recognize my ipod nano)
    i am afraid to reset the ipad for fear that i will still not be able to connect afterwards and i will have lost all the apps currently installed.
    Any hints on how to go about fixing this issue?

  • ITunes won't detect iPhone4

    My iPhone wouldn't open my messages and each time I tried - it would crash.
    So I backed up and reset my settings, updated iTunes and ever since my iTunes won't detect my iPhone.
    I have tried all the troubleshooting options, uninstalled & reinstalled iTunes twice, and it's still not showing when I plug in my phone.
    MY phone keeps restarting, won't allow me to text, won't allow me to turn on my iMessages.
    Someone please help before I throw my phone against a wall.

    This may help:
    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for OS X

  • ITunes won't detect firmware 4.3.3 for iPhone 3GS

    I've read about the problem where it doesn't download it and you have to turn off the firewall etc.  However my problem is that it just won't detect it at all.  I check for updates and it says that my iphone is update to date which is running on a 4.2.1.  I even tried to manualy do by downloading the firmware and going into recovery mode on the phone and shift clicking restore but then it says that the firmware is not compatible with my phone.
    The phone is an iPhone 3GS not jailbroken running on 4.2.1.
    Running Windows 7 64bit.
    I have the most recent version of iTunes.
    I did the whole virus protection being off, firewall off and changing the host file thing.
    Nothing seems to work and I'm not sure what else to do here.  I thought perhaps the 4.3.3 firmware wasn't for the 3GS but reading about it seems it is so I'm not sure why iTunes won't detect it.

    Try getting it from here
    http://osxdaily.com/2011/05/04/ios-4-3-3-download/
    Download the version for your phone, then connect the phone to iTunes and hold SHIFT while clicking Check for Updates. You can then install the file you downloaded above.

  • Itunes won't detect all my music

    Itunes won't detect all of the music on my PC there for I can't transfer all of it to my Ipad.  Thoughts?

    Think I found the problem.  It appears that if you have music that is incompatible with the ipad and you don't have the automatic converter to AAC turned on itunes just stops there and won't load the rest of the music.

  • My iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.2

    my iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.0.4

    If itunes is comming up and saying it can't read the device because it's locked with a passcode, you may have to put your device into recovery mode first.
    To put your device in recovery mode: (Following these steps will erase your device and reset everything to factory defaults)
    1) press and hold the power button until you see the slide to power off option
    2) swipe to power off
    3) Press and hold the home button while the device is off and connect it to your computer. Continue holding the home button until you see a graphic with the iTunes logo with a picture of a USB cable below it.
    4) iTunes should give you a message that it has detected a device in recovery mode. Click ok and then select Restore iPhone. iTunes will download a fresh copy of iOS and then wipe the device and restore it. Depending on the speed of your computer's internet connection this may take a while. Just leave the iphone connected to your computer until it's finished.
    If itunes is not detecting it at all or is Not giving you the message that the phone is locked with a passcode, you may end up having to reinstall itunes. This seems to be a fairly common problem after the most recent itunes update (11.1.5)
    If this is the case and you happen to be running a windows based computer you will have to uninstall itunes in this order from your programs and features option in control panel:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Then download and reinstall itunes from itunes.com try putting your device into recovery mode again and restore.
    Hope this helps.
    Cheers.

  • My iPod Touch is in Recovery Mode and iTunes Won't Detect It ?

    iPod Touch 4G
    iOS 5.1
    Purchased 2010
    I Opened Up iTunes and Upgraded to iOS 5.1.1 from 5.1 as a "Download Only". The Next Morning I Go To My Computer Plug In My iPod and Update. My iPod Then Goes into Recovery Mode and When I Quit Recovery mode It goes straight to recovery mode again with and without the cable. iTunes does not detect it when i plus it in and neither does my computer, i have tried restarting apple mobile support and that does not work. The nearest apple store is 20 miles but i could go there.

    See if you can kick it out of recovery mode with RecBoot.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • ITunes won't detect my iPhone!

    Can somebody let me know why my new iPhone 3G won't be detected on my iTunes using a regular USB cable??
    I have all the latest iTunes and I know my USB works on my regular iPod nano ... but it won't detect my iTunes to charge the phone.
    Any help is greatly appreciated. Thanks!

    This link may be helpful.
    http://support.apple.com/kb/TS1591

  • ITunes won't detect updates

    For some reason, my iTunes 10.4.1 won't detect the newest update for my iPod touch 3g (the current software is 4.2.1).  Please help!  I have already tried syncing and restoring.

    My guess is that you really have a 2G iPod.  Those can only go as high as 4.2.1.  If yours is an 8 or 16 GB model it is surely a 2G since Apple only made 32 and 64 GB 3G iPods.  A 32 GB can be either a 2G or 3G.  To identify yours go to:
    Identifying iPod models

  • Computer won't detect iPod

    Hi,
    My computer won't detect my iPod when I plug it in. I open up iTunes and it won't show up in the list. It gets a picture of a sad ipod on it, and as it starts up it makes an odd clicking noise. I cannot get it into disk mode. I've tried all of the solutions at the apple support site and it simply won't work. I downloaded the iPod Updater software and I got it running but it couldn't detect my iPod for some reason. Ive switched the cable to different USB ports and my comp wont detect it. Also when I try and reset it, (after the clicking noise stops and it shuts off) there is an icon which looks like a battery with rough, jagged, or broken ends. What does this mean and what can I do?

    Welcome to Apple Discussions!
    iPod Displays A Sad Face
    Also, for the other icon...
    Have A Strange Icon On Your iPod?
    btabz

Maybe you are looking for

  • How to use SSO with Forms application

    Can somebody explain, how can we configure the SSO with Forms application. I have two application server instances. One for infrastructre and Other for application. Thanks

  • How to set log filename dynamically

    Hi all! Could anybody give me a hint how I can set file name for log4j dynamically. I have a log4j.properties file: log4j.rootCategory=debug, stdout, R #### First appender writes to console log4j.appender.stdout=org.apache.log4j.ConsoleAppender log4j

  • Data target error when opening InfoPackage (not loadable)

    Hi, I have transported my objects from the development environment to QA environment, but now when I try to open one specific InfoPackage (in QA) to schedule a data load to an DSO, I receive the following error: Data target 'P_USUARIO ' removed from

  • Problem with using mouse scrollwheel within CS5?

    Hey all.  Just upgraded my PS from CS3 to CS5, and I seem to be running into issues with the scrollwheel on my mouse. When trying to use it from inside CS5 (say, inside a long 'Open...' window), it seems to lock up the entirety of Photoshop for a mom

  • Why do I keep receiving the error message: disk failed image corrupt

    I am trying to upgrade my version of Firefox from 2.0.0.2 (downloaded Nov. 2007) to the new version 3.6.12. on my IMac desktop computer. When I download the file I receive a white and grey icon that says Firefox 3.6.12.dmg. When I click on this icon