ITunes won't install after I click license agreement page

iTunes won't install after I click license agreement page

I had the same problem as many are having, I am running Win XP Pro and after installing the latest greatest version fresh no go, tried all the fixes mentiond around the net and no go all you get is the dam agree screen ... so I had enogh, I completly uninstalled the new version and then installed version 10 and it works fine so I think they droped the ball in the programing of the latest release thats my 2 cents. I am so glad i always keep older versions on hand because many times new versions are buggy or just do not work NOTE TO APPLE DO NOT FIX IT IF IT AINT BROKE comes to mind ... the older just work and the new junk fails don't they test the programs anymore? accross the dif supported platforms? whlth all these peole having the same problems I would say they botched the program code or installer.
It says after the install there is a newer version great after waisting all this time I will not be updating till they claime and prove they have a big prob and fix it and then test it compleatly.
Important my problem started on first installing Itunes ona newely set up XP comp so I had no settings or anything and did not care a full uninstall worked for me. Not sure with those that have tons of stuff allready in the iTunes system,
Complete working version 10.0.0.68 works fine in win XP Pro ...

Similar Messages

  • Itunes won't install after deleting it

    updated to 11.2.0 and didn't recognize my phone or ipod. deleted itunes and all the software updaters. tried to reinstall it and now it won't even run the install on my computer once i download it

    Hello skozel,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes for Windows installation issues:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • ITunes won't open after OS update to Yosmite

    ITunes won't open after OS update, ITunes has been updated, it won't open or bounce. It will not allow me to move it to trash or reinstall it. I have already updated to OS X Yosmite two times as directed by apple, I have rebooted in safe made as well as Command/Option/P/R before start up. I have opened console/system log to see if there is anything going on but when I click on Itunes nothing happens, not even so much as half a line of script. I'm stumped. If I wanted someone to tell me to turn it off and on again I'd just watch IT Crowd. please help

    Thank you for using the Apple Support Communities
    If you head into your applications folder and locate iTunes. Right click iTunes and show package contents. In there there will be a contents folder --> MacOS --> double click on the iTunes terminal icon. This should force iTunes to open via a terminal window and at the very least it will tell you what it is getting stuck on.

  • ITunes won't open after downloading 7.0

    My iTunes won't open after downloading 7.0, what should I do?

    replying to Robert
    I get a Windows error code of 0x666D743F
    First see:
    iTunes 7 for Windows: iTunes fails to launch with an unknown error
    There are some other possibilities
    That error has been known to be produced by having Total Recorder or the Volume Logic plug-in installed on the PC.
    For a workaround for Total Recorder, see:
    chuckieb: One fix for iTunes 7 "0x666D743F" error
    To check on the Volume Logic issue, see:
    Troubleshooting issues with 3rd-party iTunes add-ons
    For further possibilities, see other posts in chuckieb’s thread.

  • ITunes won't open after update; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5

    iTunes won't open after update - help, please; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5.

    i had a problem similar to yours and better yet, i have the fix for it. i downloaded maverick 4 months ago and was without itunes ever since. all itunes icon did was bounce. itunes would never open and whats more, is when i would try to update it, i would get a "thank you for downloading itunes!" page , but the download would never work. so i scoured the net for solves. nothing that worked. <4 months later> then last night i took a new approach. i decided even though maverick would not allow me to uninstall itunes, i would find a way to uninstall itunes. then i would reinstall back to 11.1.5 i was successful and heres what i did.
    step one-
    Back up your iTunes Library.itl file, found under ~/Music/iTunes
    (even tho i didnt, i only had 3 artists in there at the time. and they didnt get erased but i advise you back up just in case.)
    step two-
    download itunes 10.7 from apple. i used this link Download it from Apple here
    (i pulled the link from Aarons website (awesometast.com). you download 10.7 however you want but i used the link above and have had no issues).
    although im not sure you need to do this step ( you may be able to download 11.1.5 itunes without 10.7, i did because i was following intructions from http://awesometoast.com/downgrading-to-itunes-10-7-from-itunes-11-on-osx/
    step 3-
    open Terminal
    step 4-
    enter in these 3 commands hitting return after each line. 1st line nothing seems to happen, 2nd line nothing seems to happen and 3rd line gives you a warning and requires password to continue. when i did it, my password didnt appear as i entered it and i hit return without looking, so i entered it in again, although im not sure i had to the 2nd time.
    killall iTunes
    killall "iTunes Helper"
    sudo rm -rf /Applications/iTunes.app/
    step 5-
    drag off and dump the itunes icon (which now has the ? shadow in it) off your dock.
    step 6-
    install 10.7 itunes you downloaded earlier. (not sure if this part is neccesary. you may be able to just download 11.1.5 but i downloaded 10.7 because i was following Aarons steps.) itunes now works.
    step 7-
    go to apple and update to 11.1.5 itunes. install it. open it and you have itunes 11.1.5 in perfect working order. assuming you have a decent internet speed for the downloads, the whole process takes very little time.
    with those steps above, you can solve itunes just bouncing and not launching issues and also the "thank you for downloading" and nothing downloads issue. enjoy. also i would like to give a shout out to http://awesometoast.com and thank Aaron for the knowledge that enabled me to get itunes back into my life.

  • Itunes won't open after I agree to lic.

    itunes won't open after I agree to lic.

    Refer this article to remove SC Info.sidb file
    http://support.apple.com/kb/TS2363
    If that does not work, Repair your Quicktime.  START/ CONTROL PANEL/PROGRAMS n FEATURES/highlight QUICKTIME and click REPAIR

  • Itunes won't install. I get a message stating "apple mobile device failed to start. Verify that you have sufficient priveleges to start system services. I had itunes on this laptop and an urgrade came. Now nothing. Windows7, 64 bit

    itunes won't install. I get a message stating "apple mobile device failed to start. Verify that you have sufficient priveleges to start system services. I had itunes on this laptop and an urgrade came. Now nothing. Windows7, 64 bit

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • ITunes won't install I keep getting "The installer has insuficient privileges to modify this file: C:\programFiles\iPod\Acknowledgements.rtf." it comes up if I try to uninstall iTunes as well.

    iTunes won't install on my PC after using it for several years, now I get the following error message; "The installer has insuficient privileges to modify this file:C:\programFiles\iPod\Acknowledgements\rtf." I get the same error message if I try to uninstall iTunes as well. I am the only user of this computer and am the administrater.

    See the second box in  Troubleshooting issues with iTunes for Windows updates.
    tt2

  • ITunes won't install on my OS 10.3. Will Tiger 10.4 run it?

    My PowerMac G4 is running Panther 10.3.9. I have a 733 MHz processor. iTunes won't install nor can I view any videos. If I go to Youtube the system crashes. Some sites tell me I need a flashplayer upgrade, but it won't install. An Apple tech told me to upgrade to Leopard 10.5 and it would solve my problems. My understanding is that Leopard 10.5 needs 867MHz to run. If I upgrade to Tiger 10.4 will that solve any of my problems?

    Hello marwhi,
    First of all, Welcome to the  Discussion forums!
    Yes, OS 10.3.9 cannot run the latest iTunes 9. You will need at least Mac OS 10.4.11 and above to run it. Your problem with YouTube may just be with your browser if you are using Safari. For now you might want to try Camino 1.6.9 and see if you have any better luck. Camino 1.6.9 tends to be a slightly more updated version of browser than the last version of Safari that runs on 10.3.9 Panther. If you do upgrade to Tiger 10.4.11 though you would be able to use a more updated version of Safari which will "play" nicer with sites such as YouTube and Google etc.
    Hardware and software system requirements for iTunes 9 can be found at http://www.apple.com/itunes/download/.
    And here are the "Mac OS X 10.4 Tiger System Requirements". You will need to purchase a "full retail" version of Tiger 10.4 install discs from a third party reseller such as on ebay etc. and the discs tend to sell for a premium these days. General idea of price can be seen by going to ebay and searching for "full retail 10.4 Tiger install" and then clicking on the "Completed Auctions" link in the left column. This should give your a good idea of what they tend to sell for on the resale market when available. Do not purchase machine specific or "upgrade" discs.
    post back with further questions or comments,
    LS

  • ITunes won't install. Says error writing to file C:\Program Files\itunes\itunes.resources\da.lproj\AboutBox.rft

    iTunes won't install. 
    Says error writing to file C:\Program Files\itunes\itunes.resources\da.lproj\AboutBox.rft
    Does anybody know what I need to do to fix this?

    I am the administrator, so this can't be a rights problem. The error message says "error writing to file c:\program files\apple software update\softwareupdate.exe. Verify that you have access to that directory".
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive, as per the following document:
    How to perform disk error checking in Windows XP
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon

    HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon, when I see the process in task manager Firefox is there but after a second it will end processing automatically, I have tried ff7 and ff6 and have the same problem, even re installing the Firefox doesn't fix the problem, any one know the reason? I'm using a win7 64bit, and bitdefender internet security

    Hi All,
    This is not a virus . I used this website & I found it very useful & you can remove it through the following steps.ar.hao123.com 1- Then right-clicking on the icon Mozilla Firefox on the desktop, then choose "Properties", as shown in the picture: 2- Select Tab "shortcut", and then delete the text after. Exe in "target" as shown in the following picture, then press "Ok" 3- Open Firefox, and then choose "options" from the list of "tools" 4- Select the tab "general", and in the list "when Firefox starts" then select "show my homepage" and in the box "homepage" then enter any other link and then press "OK"
    you can visit [http://ar.hao123.com/report/ar-feedback.html Hao123] hao123
    ar.hao123.com

  • Itunes won't install. AMDS won't uninstall

    Itunes won't install. I've tried to uninstall itunes and all apple software so that I can install the latest version. But it won't let me uninstall apple Mobile Device Support. Can anybody help? How do I get iTunes back? Whenever I try to install the latest version it gets stuck just after checking the AMDS.

    There is no text error message. The install of itunes just freezes on the "Checking Space Requirements" bit (which is immediately after it checks AMDS.
    Hmmmm. Possibly a disk/file damage issue there, tom. If so, running a chkdsk over your C drive might help.
    Vista instructions in the following document: Check your hard disk for errors
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors. You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • HT1349 Win 7 64 bit:  iTunes won't install, get error code 2324 or installer says I am not logged on as administrator:  only one user and it is an administrator user.

    Win 7 64 bit:  iTunes won't install, get error code 2324 or installer says I am not logged on as administrator:  only one user and it is an administrator user.

    Hey there k8ei,
    Thank you for using Apple Support Communities
    I found this article for you to help troubleshoot installing iTunes named Trouble installing iTunes or QuickTime for Windows found here http://support.apple.com/kb/HT1926.
    Here is a general overview on where the troubleshooting will take you:
    General installation troubleshooting
    1. Empty your Temp directory and restart
    2. Completely remove iTunes and related components
    3. Install the latest version of iTunes
    Additional troubleshooting
    After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
    1. Make sure you have administrator account access
    2. Make sure your folder names don't contain strange characters
    3. Get the latest Windows updates
    4. Disable other conflicting software
    All the very best,
    Sterling

  • Itunes won't install. Error message: Apple Application Support not found

    Itunes won't install. Error message: Apple Application Support not found.  What is the fix for this?

    It is always these four updates that fail.  I've tried downloading and installing them seperately from apple downloads.  I've tried various recommended fixes, and nothing I can figure out works.  Before these problems, itunes worked on the computer for a year.
    Thank you again for wanting to help me.
    Ken
    1)  Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
    Installation date: 12/17/2011 7:58 PM
    Installation status: Failed
    Error details: Code 643
    Update type: Important
    A security issue has been identified leading to MFC application vulnerability in DLL planting due to MFC not specifying the full path to system/localization DLLs.  You can protect your computer by installing this update from Microsoft.  After you install this item, you may have to restart your computer.
    More information:
    http://go.microsoft.com/fwlink/?LinkId=216803
    Help and Support:
    http://support.microsoft.com
    2)  Security Update for Microsoft Office Excel 2003 (KB2596954)
    Installation date: 12/17/2011 7:56 PM
    Installation status: Failed
    Error details: Code 57E
    Update type: Important
    A security vulnerability exists in Microsoft Office Excel 2003 that could allow arbitrary code to run when a maliciously modified file is opened. This update resolves that vulnerability.
    More information:
    http://support.microsoft.com/kb/2596954
    Help and Support:
    http://support.microsoft.com/?LN=en-us
    3)  Update for Microsoft Office Outlook 2003 Junk Email Filter (KB2597035)
    Installation date: 12/17/2011 7:56 PM
    Installation status: Failed
    Error details: Code 57E
    Update type: Important
    This update provides the Junk E-mail Filter in Microsoft Office Outlook 2003 with a more current definition of which e-mail messages should be considered junk e-mail.
    More information:
    http://support.microsoft.com/kb/2597035
    Help and Support:
    http://support.microsoft.com/?LN=en-us
    4)  Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2478662)
    Installation date: 12/17/2011 7:52 PM
    Installation status: Failed
    Error details: Code 80070BC9
    Update type: Important
    A security issue has been identified that could allow an attacker to compromise your Windows-based system that is running the Microsoft .NET Framework and gain complete control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
    More information:
    http://go.microsoft.com/fwlink/?LinkID=211424
    Help and Support:
    http://support.microsoft.com

  • ITunes won't recognize my iPod Click

    Hello,
    iTunes won't recognize my iPod click. I bought the iPod used on ebay. It didn't come with software. Does it need it? If so where can I download it.
    Thanks,
    Jim

    See if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.

Maybe you are looking for

  • Photoshop CS3 Initialization Error

    Successfully installed & activated Photoshop CS3  on a new PC with a fresh Windows 7 Pro 64bit installation, along with Photoshop CS3 10.0.1 & Bridge CS3 2.1.1.9 updates.  Bridge runs fine, but Photoshop returns the following error when attempting to

  • Webpage not working everywhere

    My published webpage works on my Mac and my PC. It works on Safari, and on Firefox. It looks strange and too light on Internet explorer, and some people have told me that it is so light on their computers that they cannot see much at all; neither can

  • Using a function in multiple scenes

    I have a .fla project being created under CS4, using ActionScript 3.0, that consists of multiple scenes. In the code attached to the first scene, I define some functions that are used as methods on buttons: function MouseDown(TheKey:Object):void TheK

  • Material group in Material master

    Dear All Warm greetings How to configure display of materials through material group? For end users Example when my user wants to view any material, system should only show the materials which he should as per material group Example while create Purc

  • Inspection lot to be created if thge delivery is cancelled

    Hi All, Our client's requirement is whenever the delivery is cancelled with movement type 602 the inspection lot should be created and the material should be placed in the quality inspection stock. We have activated inspection type 06 in QM view. How