Itunes won't load shared library just loads and closes

Enabled home sharing, shows "John Doe's Library". When I click on it, it says "Loading John Doe's Library" after about 10 seconds it jumps back to my main library and won't load John Doe's library. Help!!!
*Itunes is updated, tried restarting, John Doe can open my library on his computer.

Thanks for the tip but holding the option key didn't seem to do anything at all. I'm not sure how to navigate to my library file (is this all done in iTunes or the Finder?) It just launched iTunes with no mp3's listed, all the preferences remain and there is no welcome screen as if it's the first time I've run iTunes and no mention of a corrupt file.
This is really bizarre to me. My music library is far too large to drag and drop all the files into iTunes every time I want to update my iPod.

Similar Messages

  • ITunes won't show shared library on Mac

    So, I have a network of a Mac Mini G4, a PC desktop with Win XP, and a netbook with Win XP. I have iTunes running on each machine - iTunes 10.0.1 on the two Win XP machines, and iTunes 9.2.1 on a Mac Mini G4 with OS X 10.4.11. I have authorized each iTunes with the same iTunes account. And I have verified that all three machines are on the same subnet and in the same network (SMB is set up to the same name as the Windows machines). I can share files between all three machines in any direction. However, I can only access shared libraries in iTunes on the two PCs - the Mac Mini never displays any shared libraries in iTunes.
    I have gone into Preferences on all three machines and verified that each is set up to look for shared libraries and share their libraries. I even enabled Home Sharing on each machine just in case. But still, I can access the Mac library from both PCs and play the music, and I can access the PC libraries from each PC. But I cannot access either PC library from the Mac Mini.
    Any ideas??

    UPDATE:
    Figuring the main link in the chain is the fact I'm using a 3rd party USB wifi adapter on my Mac Mini, I unplugged it, and plugged the Mini directly into the router with an ethernet cable. Everything works fine then - iTunes library sharing works, and the Touch can now access it with the Remote app.
    So, apparently it is the Planex GW-US54GXS USB Wifi adapter that is the problem. Completely uninstalled the drivers for the Planex wifi device, restarted, reinstalled, still same problem.
    Wierd thing is I can still access the internet, and do file sharing between all devices. Just iTunes communication is a problem.
    Any ideas what the Planex wifi device might be interfering with iTunes?

  • RealTime - Failed to load shared library

    Hi everyone,
    I'm working with the cRIO 9074 system and programmed a ANC application with LabView. Yesterday I tested my application the first time but it didn't work as expected. Because of my testing- and developing-place are different I have to carry the cRIO-System and my laptop between them. So I just disconneted the powersupply and the networkcable. Then 10min later I tried testing again but I got an error. Today in the morning I got the same error like yesterday, which is the following one:
    "Failed to load shared library AdaptivFilter. Ensure that the library is present on the RT target. Use MAX [...]"
    I reinstalled the NI software (more than once) how I was adviced with MAX but it didn't fix the problem, maybe the AdaptivFilters-library was not included.
    In the project-explorer a library called "NI_AdaptivFilter.lvlib" is included and I also found the path of the file on my harddrive.
    It drives my nuts that it worked and than 10min later it doesn't.
    I hope you could help me, thanks.
    Schue
    Attachments:
    project_explorer.PNG ‏71 KB
    Unbenannt.PNG ‏57 KB

    Hi Bob,
    Thanks for responding.  I am running LabVIEW 8.5 and running on an 8106 Embedded Controller.  Unfortunately, I cannot post my DLL however, I did some troubleshooting and found that the issue seems to be that myDLL calls another one of my DLLs which doesn't seem to be loaded onto the RT box.  If I deploy and run a VI which calls this second DLL and then run my original VI, it deploys without issue.  I guess I can understand why it didn't work in first place, since the 2nd DLL is not called from any VI and only called from myDLL, however I don't understand why simply opening the VI which contains the call to myDLL and reselecting it fixes the problem.  Also I have run the DLL thru the 8.5 DLL checker and it says that the DLL is OK, in fact the DLL checker new that myDLL had a dependency on the second DLL.  Is there something that I can do other than pre-deploy the second DLL to the RT box to get around this issue?
    Thanks again,
    Kevin C.     

  • DAC - Error loading shared library [pmwrtrel.dll] in the dynamic lib mgr

    Hi,
    While executing ETL load on a Windows 32-bit machine with DAC v10.1.3.4.1, we were able to execute 24 tasks out of 317 successfully. Then it fails with the following error message:
    PRE-SESS> TM_6232 Error loading shared library [pmwrtrel.dll] in the dynamic library manager. The error is [Database driver event...Error occurred loading library [pmwrtrel.dll]. System error encountered is 127. Error text is The specified procedure could not be found. .].
    PRE-SESS> CMN_1761 Timestamp Event: [Mon Mar 29 19:04:05 2010]
    PRE-SESS> WRT_8236 Error getting pre session writer object for target [W_ETL_RUN_S]
    MANAGER> PETL_24027 Pre-session task completed successfully. : (Mon Mar 29 19:04:05 2010)
    DIRECTOR> PETL_24006 Starting data movement.
    MAPPING> TM_6660 Total Buffer Pool size is 12582912 bytes and Block size is 128000 bytes.
    READER_1_1_1> DBG_21437 Reader: Source is a file-based source.
    READER_1_1_1> FR_3118 source [SQ_FILE_DUAL] code page: [7-bit ASCII]
    READER_1_1_1> FR_3071 Maximum Line sequential buffer length is 1026.
    READER_1_1_1> BLKR_16003 Initialization completed successfully.
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Mar 29 19:04:05 2010]
    WRITER_1_*_1> TM_6232 Error loading shared library [pmwrtrel.dll] in the dynamic library manager. The error is [Database driver event...Error occurred loading library [pmwrtrel.dll]. System error encountered is 127. Error text is The specified procedure could not be found. .].
    MANAGER> PETL_24031
    ***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
    Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_FILE_DUAL] has completed. The total run time was insufficient for any meaningful statistics.
    Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_FILE_DUAL] has completed. The total run time was insufficient for any meaningful statistics.
    Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ETL_RUN_S] has completed. The total run time was insufficient for any meaningful statistics.
    MAPPING> CMN_1793 The index cache size that would hold [7340064] rows in the lookup table for [MPLT_GET_ETL_PROC_WID.LKP_ETL_PROC_WID], in memory, is [29555310648557682] bytes
    MAPPING> CMN_1792 The data cache size that would hold [7340064] rows in the lookup table for [MPLT_GET_ETL_PROC_WID.LKP_ETL_PROC_WID], in memory, is [12948046503805036] bytes
    MANAGER> PETL_24005 Starting post-session tasks. : (Mon Mar 29 19:04:05 2010)
    MANAGER> PETL_24029 Post-session task completed successfully. : (Mon Mar 29 19:04:05 2010)
    MAPPING> TM_6018 The session completed with [0] row transformation errors.
    MANAGER> PETL_24002 Parallel Pipeline Engine finished.
    DIRECTOR> PETL_24013 Session run completed with failure.
    DIRECTOR> TM_6022
    SESSION LOAD SUMMARY
    ================================================
    DIRECTOR> TM_6252 Source Load Summary.
    DIRECTOR> CMN_1740 Table: [SQ_FILE_DUAL] (Instance Name: [SQ_FILE_DUAL])
         Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
    DIRECTOR> TM_6253 Target Load Summary.
    DIRECTOR> CMN_1740 Table: [W_ETL_RUN_S] (Instance Name: [W_ETL_RUN_S])
         Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
    DIRECTOR> TM_6023
    ===================================================
    DIRECTOR> TM_6020 Session [SIL_InsertRowInRunTable] completed at [Mon Mar 29 19:04:06 2010].
    Kindly someone tell us how to resolve this issue.
    Regards,
    Vishnu

    what BIA version are you on?
    perhaps you have to install a informatica fix or a DAC patch

  • CRIO Fails to Load Shared Library

    All,
    I'm getting an odd error every other time I tried to load my code onto a cRIO in the dev environment.
    Deploying NI_AALPro.lvlib:Linear Fit (LS).viNI_AALPro.lvlib:Linear Fit (LS).vi loaded with errors on the target and was closed.
    LabVIEW:  Failed to load shared library lvanlys.*:LinFit_head:C on RT target device.
    This VI works the first time, and then fails to run the second time you hit run.
    If I reboot the device this corrects the problem, but I have to say this bug costs me quite a lot of time.
    Regards,
    Ken 

    xkenneth,
    Did that solve your problem? If so, is it reproducible with a small project?
    Verne D. // LabVIEW & SignalExpress Product Support Engineer // National Instruments

  • Failed to load shared library

    I am getting a "Failed to load shared library myDLL.dll:myFunction:C on RT Target Device" error when attempting to deploy a VI which contains a call to myDLL on a RT PXI.  If I open the VI with the Call Library Function Node and simply reselect myDLL within the Library name or Path box and save the VI, it will then deploy without error.  This continues to work until I start changing the VI at which point I attempt to deploy the VI again and get the failed to load error.  Once again I open the VI, reselect myDLL, save, and the failed to deploy error goes away.
    Does anyone have any ideas about whats going on here?
    Thanks in advance
    Kevin C.

    Hi Bob,
    Thanks for responding.  I am running LabVIEW 8.5 and running on an 8106 Embedded Controller.  Unfortunately, I cannot post my DLL however, I did some troubleshooting and found that the issue seems to be that myDLL calls another one of my DLLs which doesn't seem to be loaded onto the RT box.  If I deploy and run a VI which calls this second DLL and then run my original VI, it deploys without issue.  I guess I can understand why it didn't work in first place, since the 2nd DLL is not called from any VI and only called from myDLL, however I don't understand why simply opening the VI which contains the call to myDLL and reselecting it fixes the problem.  Also I have run the DLL thru the 8.5 DLL checker and it says that the DLL is OK, in fact the DLL checker new that myDLL had a dependency on the second DLL.  Is there something that I can do other than pre-deploy the second DLL to the RT box to get around this issue?
    Thanks again,
    Kevin C.     

  • Failed to load shared library on RT target device.

    I am using 7030 RT target. When I use Call Library Function Node with specified DLL library the application is working properly on Windows target. When I try to download the application on RT target PCI 7030 I get the following error messages: Failed to download useDLL.vi. Failed to load shared library EasyDLL.dll on RT target device. Because the application (attached to the question) is distributed with NI product I would suppose it is written OK. I would like to know what restrictions are imposed on DLL libraries which should be targeted on PCI 7030 RT target. Why the application useDLL.vi with EasyDLL.dll can't be loaded on PCI 7030? Does it mean that Call Library Function Nodes are not compatibel with PCI
    7030 target?! Thank you for any explanation.
    Attachments:
    useDLL.vi ‏15 KB
    EasyDLL.dll ‏80 KB

    OK I downloaded your files and tried them with a PXI real time controller and the error you mentioned happened for me as well. After digging for awhile, here's the best explanation I could find:
    1 - useDLL is calling other DLLs that are failing to download
    2 - useDLL is accessing some of the Win API that is not supported by the RT OS.
    Read more about this at:
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000...
    ~cheers,
    Darin G

  • LabVIEW: Failed to load shared library nisysrpc.out

    Errored were detected in the target log when connecting to the target:
    LabVIEW:Failed to load shared library nisysrpc.out.Ensure that the library is present to the RT target. Use MAX to install NI software or FTP to transfer custom libraries on the target .
    labview 2012
    sbrio 9636
    已解决！
    转到解答。
    附件:
    Shared Library.jpg ‏3797 KB

    这个错误是因为RT系统启动部署时缺失库文件或者加载库文件失败导致的。
    库文件加载失败原因有很多，而且就算把库文件重新添加进去可能也不能解决问题。建议你重装sbRIO 9636的RT系统，RT重装系统很快，10分钟就能完成。
    在MAX里面远程系统下找到你的9636，右键选择格式化。格式化完成后展开9636，右键软件选择更改删除软件，此时把软件再重新装进去就可以了。

  • Itunes Shared Library between Mac and Windows isn't sharing videos properly

    Hi, I'm a bit new to the mac world, but I'm the proud owner of a new macmini. I also own a Windows 7 machine.
    My problem is with the Itunes Shared library. Itunes 10 on my mac is set up to share everything, including podcasts. I can see these from Itunes 10 on Windows, and I can play music (and audio podcasts), but video is hit or miss.
    Videos downloaded from Itunes U tend to work, lectures and stuff.
    Video podcasts (also downloaded from Itunes Store) and other videos don't work at all. Itunes just doesn't play the video, and doesn't even launch the "black screen". The timer remains at 0.00.
    On the other hand, sharing videos from the PC to Mac works well, i.e. my mac can see the contents of the itunes shared library on Windows and play videos. It just doesn't work the other way around.
    Thanks for reading and I hope this problem can be fixed.

    Woops!
    Here you go:
    http://discussions.info.apple.com/message.jspa?messageID=10923818

  • I have Windows 8 and Itunes 11.1.2. When I click on the Itunes desktop shortcut, Itunes won't open. I just the icon go to the taskbar and nothing more. Please help.

    I have Windows 8 and Itunes 11.1.2. When I click on the Itunes desktop shortcut, Itunes won't open. I just the icon go to the taskbar and nothing more. Please help.

    Delete the shortcut and make a new one. The 'real' application will probably be fine if you launch it from the Start/Programs menu.

  • I bought a new MacBookPro moved everything from old MacBookPro, new machine runs 10.6.7 - but iPhoto won't 'upgrade' the library - just hangs up supposedly while writing new library. help. thanks.

    i bought a new MacBookPro moved everything from old MacBookPro, new machine runs 10.6.7 - but iPhoto won't 'upgrade' the library - just hangs up supposedly while writing new library. help. thanks.

    How did you "move everything" over?
    Migration assistance does not handle the iPhoto library well sometimes - the best way is to drag the bad iphoto library from the pictures folder on the new system to the desktop, connect the two systems together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old system to the pictures folder of the new system and launch iPhoto on the new system - it will open and convert the iPhoto library as necessary and you will be fine - once you test the iPhoto library you can delete the one on the desktop
    LN

  • Downloaded new version of itunes lost my library now itunes won't save my library have to install my library everytime i turn computer off itunes store will not open either have tried a few ways to solve problem from community members nothing works

    downloaded new version of itunes lost my library now itunes won't save my library have to install it everytime i turn my computer off  itunes store won't open either with almost 16,000 songs this is getting unbearable if someone wants to download new version it's a nightmare

    I had the same problem on my iphone 5s, and this fixed it. http://support.apple.com/kb/TS5335

  • My itunes won't work so i tried reinstalling and when it starts an error pops up that says: "the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the insta

    my itunes won't work so i tried reinstalling and when it starts an error pops up that says:
    "the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the installation package 'Itunes.msi' in the box below
    please help, its frustrating

    first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
    next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
           next download itunes. it worked for me hope this is helpful!!
        oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

  • So I've downloaded a tv series from iTunes onto my macbook pro, for some reason the episodes on my iTunes won't play at all. no sound and no images. any suggestions and help?

    so I've downloaded a tv series from iTunes onto my macbook pro, for some reason the episodes on my iTunes won't play at all. no sound and no images. any suggestions and help?

    Hi,
    As you have match, I suggest that you create a new library by holding ctrl whist launching iTunes. Select create new library. Sign into iTunes Store and activate match. You will now have access to your music and will be able to stream your music.
    Options : get a new external drive formatted for mac and either download music from match or copy music from old drive to new one. Alternatively you could reformat old drive and download music from match - I would not be comfortable using this option as it means erasing drive before being able to use with mac.
    Jim

  • When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device

    When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

Maybe you are looking for