ITunes won't open after downloading software update.  Macbook Pro OSX10.6.8  Simple solution?

iTunes won't open after downloading software update.  Macbook Pro OSX10.6.8  Simple solution?  And by the way, this is apparently a common problem and Apple has completely failed to warn in advance or offer a quick straightforward solution - used to be a good company, but it's becoming just another crappy screw-the-consumer corporation.

It would help to know versions here.  I'm guessing your update put an older version of something into a place where a newer version of something iTunes put in there existed.  Updating an earlier OSX version to 10.6.8 is still only updating to system software that was issued several years ago.  If you are running some slightly newer version of iTunes issued subsequent to 10.6.8 and you just updated to 10.6.8 you may have put in an older version of something iTunes uses.  Anyway, I'm guessing here until we know exactly what you did.

Similar Messages

  • Itunes won't open after downloading last update. Error message says "not supported by this type of Mac"

    Downloaded latest iTunes update. Now iTunes won't open, and the error message says "You can't open the application iTunes because it is not supported on this type of Mac." I have been using this MAc since 2008. Any suggestions appreciated.

    Welcome to Apple Support Communities
    It's a common problem that some users have after installing the most recent iTunes. Download and install again iTunes 11.0.3 to solve that problem > http://support.apple.com/kb/DL1614

  • ITunes won't open after downloading 7.0

    My iTunes won't open after downloading 7.0, what should I do?

    replying to Robert
    I get a Windows error code of 0x666D743F
    First see:
    iTunes 7 for Windows: iTunes fails to launch with an unknown error
    There are some other possibilities
    That error has been known to be produced by having Total Recorder or the Volume Logic plug-in installed on the PC.
    For a workaround for Total Recorder, see:
    chuckieb: One fix for iTunes 7 "0x666D743F" error
    To check on the Volume Logic issue, see:
    Troubleshooting issues with 3rd-party iTunes add-ons
    For further possibilities, see other posts in chuckieb’s thread.

  • Why does itunes crash upon opening after the software update?

    Why does itunes crash upon opening after the software update? Everything worked fine until I decided to update this morning and as soon as the computer rebooted, the error message appeared.  Is there anything available to fix this?

    I answered the same question in a similar post.  It's all to do with the wireless sync. 
    I used the following method to stop iTunes from constantly restarting -
    Open task manager
    Select the 'Processes' tab.
    Look for 'iTunesHelper.exe'
    Select 'iTunesHelper.exe'  then click on 'end process'
    Hope this helps.

  • ITunes won't open after latest OSX update

    AFter latest OSX update iTunes won't open.  Reinstalled iTunes.  Reinstalled OSX update.  When I click on icon in applications or in finder nothing happens.

    This is what worked for me and others--original post found on this thread: Yosemite slow opening and cannot open itunes
    This solved my question by Linc Davis.......
    According to multiple reports on this site, Apple Support has given the following instructions to others who had a similar problem. I can't confirm that this procedure works or that it's necessary, but it won't leave you any worse off than you are now.
    First, back up all data.
    Select the iTunes icon in the Applications folder and open the Info window. Click the padlock icon in the lower right corner to unlock the settings.
    In the Sharing & Permissions section, change the Privilege setting for each Name in the list to Read & Write. Close the window. If the settings aren't visible, click the disclosure triangle on the left so that it points down.
    You should now be able to drag the iTunes application to the Trash and empty. Your iTunes data won't be affected.
    Click the iTunes link at the top of this page, download the installer package and run it.
    If iTunes still doesn't launch, or if you can't complete the procedure, reinstall the OS.

  • ITunes won't open after trying to update

    I updated my iPhone 5C to IOS8  yesterday, and when I plugged it into my computer it said I needed to update my iTunes. When I tried to update it, it wouldn't work and told me to do it manually. It then came up with the screen that searches for updates, and I pressed cancel so that I could press the tools button. When I pressed tools, I could not click on the top option that I was supposed to select. I closed the tab and now iTunes won't open.

    Hello snowwhitesapple,
    Thanks for using Apple Support Communities.
    I'd like you to please follow the steps in the article below to completely uninstall iTunes, and then reinstall the new version.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Take care,
    Alex H.

  • Itunes won't open after Installing 9 update

    I installed the Itunes 9 upgrade. It downloaded fine. Then when it was done, I clicked on Itunes on my dock to open it but it just bounced like it was going to open but then stops and nothing opens. Is this happening for anyone else? Any suggestions on what to do...

    The same thing happened to me where the icon "bounces," but iTunes won't open.
    So apparently I don't have the right version of OSX for the program. OK. So what to do I to get back my old iTunes?
    I'm a little ****** about this because I feel like a warning should have popped up somewhere during the installation process telling me my system wouldn't accommodate the new iTunes.
    Secondly, I'm ****** off at myself because all of this trouble was caused by trying to download an episode of freakin' "Top Chef." Why on earth would the show require the newest version of iTunes?

  • Itunes won't open after downloading it to a new computer

    Itunes won't open when installing to our new pc with ie7.

    Restart Computer.
    Refer steps here to delete SC file(s):
    Win7/Vista http://support.apple.com/kb/TS2363
    WinXP http://support.apple.com/kb/TS1776
    Then proceed to repair your QuickTime. START > CONTROL PANEL
    WinXP - Add n Remove Programs
    Win7/Vista - Programs n Features
    highlight QUICKTIME and click CHANGE then REPAIR

  • ITunes won't open after 7.6 update

    I don't remember when software update ran, but since then I can't open iTunes on my Mac (Powerbook G4, OS 10.4.11). It bounces once in the dock and that's it. Same thing if I run it from the apps folder. I've tried a few things already:
    1) Run diskwarrior. Found some problems, said it fixed it.
    2) Tried opening iTunes from a different account. Same thing.
    3) Deleted (dragged to trash) the iTunes app and shortcut. I know there's more files out there, but not sure what they might be.
    4) Repaired permissions.
    So that's where I am. iTunes still won't open and my job ***** without being able to drown out the rest of the world with headphones! Any help will be appreciated.

    I don't pay any attention to updates, but last week my entire itunes library vaporized. I used my back-up disks to get my stuff back, but all the playlists are empty and itunes is crashing constantly. Just trying to click on another song or playlist causes it to "spin" and I end up force quitting. Oddly enough if I use my remote control it works better than from the desktop.
    I'm really disappointed with this whole thing, as I had never had problems with my macs like this. And someone mentioned antivirus software. Should I have that on my macs???

  • My itunes won't open after most recent update

    I dont know what to do!  I have tried restarting nd reinstaling itunes but it still wont open

    I have the same issue.  Yesterday I allowed Window 7 64 bit to download a couple of updates and and service pack for Office 2010.  I have a new iPad 2 which I had not synced yet (we have multiple user accts set up on system and sync 2 iphone 4s and an Ipad 1st gen with no issue prior to this).  I opened iTunes and it indicated new version 10.4 was available so I updated it also.  After these updates my system became mush.  After attempting to start iTunes, the itunes.exe process loads but it sits there and hogs up memory and CPU.  I can come back to computer 10 min later and maybe it eventually opens but is very slow and eventually hangs up.  I then have issues on trying to kill the iTunes process in task manager.  Haven't even gotten close to syncing the new iPad 2.  I checked firewall settings, other services, tried running in other compatibility modes, and then checked on this forum for detailed instructions on the best way to uninstall all of the apple programs in specific order and then reinstall.  Nothing works.  So basically I have an $829 apple tablet that is 50% useless becasue I can't even sync it with my music, movies, and books.
    I have attempted to go back to version 10.3 with no luck either.  I am close to just returning my iPad 2.  My next attempt will be to do a system restore prior to the Windows 7 updates that I installed and then try installing iTunes 10.4 first before the windows updates to see if there is some connection.  I have read many posts on here where apparently many people are having issues with v10.4, especially on Win 7 64 bit systems, but it seems that Apple really hasn't addressed anything with this.  I would just like to get it working and sync the new iPad.  Anyone have any other suggestions?

  • My iTunes won't open after the latest update

    My iTunes quit working. It won't open, and i can'r delete it to re-install. I am using Windows 7

    Hello Dgschunk,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If iTunes has quit/won't launch, and/or you are having issues uninstalling and reinstalling it, you may find the troubleshooting steps outlined in the following articles helpful:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
    Sincerely,
    - Brenden

  • ITunes won't open after a recent update

    Recently I updated iTunes to 7.2. After the download was complete i tried to open iTunes and it said that iTunes has encountered a problem and needs to close. I tried restarting the computer, but the same thing kept on coming up. I went back to the apple site and repaired iTunes, but it still doesn't work. It has been 3 days and iTunes still does not come up. Any ideas?

    Apple has just released a new version that is supposed to fix this issue:
    http://docs.info.apple.com/article.html?artnum=305594
    Try that before we go into general troubleshooting.

  • Itunes won't open after 2.0 update and ipod says sync in progress

    I have downloaded the ipod 2.0 update after hours of trying, it did what it was supposed to, then it got to "resotring back-up files to ipod touch" , the little progress bar showed up, now itunes is in the toolbar on the bottom, my ipod says sync in progress and it has been like that for more than 20 minutes.
    I have windows XP, and the task manager says it isnt responding.
    WHat do i do? i dont wanna lose everything i had..
    Thanks in advance

    I am having the same problem - I upgraded to iTunes 6.0 and now I cannot open iTunes or Quicktime. Any ideas?

  • ITunes won't open after 6.0 update

    After I did the update for iTunes, I tried to open iTunes and a window popped open about terms of use but then closed almost immediately, then iTunes never opened.
    How can I fix this problem?

    I am having the same problem - I upgraded to iTunes 6.0 and now I cannot open iTunes or Quicktime. Any ideas?

  • Itunes won't open after download!!!!!!!

    Well when i opened up my itunes a window popped up asking me if I would like to upgrade to Itunes 7.6.1....I decided to do it and it worked perfectly....LAter on I closed down itunes only to realise i could no longer open it!!!...The following message came up in another window "Quick time failed to initialise (error -2096).Quick time is required to run itunes.Please re-install itunes)...I then went on to install Itunes again only to be greeted with the message that the library of songs was not compatible....i updated itunes to where it was prior to the problem but the same message appeared...Can anyone help me??????It would be preferable not to lose all my music as i have done once already in the past 4 months...Any advice welcome PLEASE????

    This is not much help but exactly the same thing happened to me after responding to the request to upgrade to 7.6.1. The upgrade went fine. Although I don't get any error messages Itunes simply doesn't load. I also would prefer not to lose 4gb of music that I have compiled over the last year. What is the matter wiith this upgrade? Is there any Apple support on this thread?

Maybe you are looking for

  • Issues in persisting dynamic entity and view objects using MDS

    Hi All, I'm trying to create dynamic entity and view objects per user session and to persist these objects throughout the session, I'm trying to use MDS configurations(either file or Database) in adf-config.xml. I'm facing following two errors while

  • How can i fix my homebutton if it is not working in iPhone 5s

    my iphone 5s is working well except the homebutton. i can open it with my fingerprint but i cant open the homepage when i press it. How an i fix my homebutton if it is not working in iphone 5s?

  • How can I keep the moon phase information from displaying in iCal?

    I did not subscribe to this astrology-related calendar and cannot find any way to keep it from displaying. I am not into astrology and don't want to see this information.

  • "Soft Crashes" in Stacks View

    At some point almost every time I use Stacks View to make picks- which is often- I come to a point that I would call a Soft Crash. I've been experiencing this for quite some time, and I'm just now getting around to posting it. It usually happens when

  • Activating user menu

    I have two diff. problems In one system I'm getting SAP menu but user menu is disabled, how to activate? and In other system all users are able to see User menu and SAP menu except one user...what needs to be changes for that user... Thx, Yash