Itunes won't open after upgrade/no error message

I had an older version of ITunes that was working fine until I wanted to buy music that required an upgrade to 7.and the download seemed to go fine but after the installation,I was unable to launch/open the program or access my library.I've removed it once and reinstalled and still nothing.I'm totally frustrated.I've checked firewalls and everything else I can think of and wish now that I just had my old copy of Itunes back so I could at least copy CD's onto my IPOD. When I click on the Itunes icon, nothing happens. I've never gotten any type of error message. Any suggestions will be greatly appreciated.

Jason,I used the troubleshooting link you gave and so far have 1.Fixed Digital Signing for Windows drivers.(didn't help) 2.Removing Itunes configuration files.
In this one I was told to delete the SC info.sidb file (I didn't have one of these when I got to the folder where it was supposed to be)The thing I haven't done is the mscofig.instruction. I was saving it for last as it sounded like it could really make a lot of changes to my computer.The Itunes installation icon is still on my desktop so I clicked on it and there was a link that said it would repair missing or damaged files in the Itunes software. It didn't help either. I can click on Itunes all day long and it won't open.I can't access the library either. I am going to do the last step you suggested and uninstall my security software and see if that helps. I appreciate all the help Jason.

Similar Messages

  • ITunes won't open after upgrade. Help!!!!

    I upgraded to 7.0.2 and now my iTunes won't open at all. No error message. Nothing. When I click on it, it seems like something is happening with hourglass thing going but nothing happens. No error message.....no nothing.
    I looked under Processes in my Task Managaer and I see iTunes.exe, iTunesHelper.exe and iPodService.exe but I don't know whats going on.
    Pleeeeeeeease heeeeeeeeeelp.
    I love my iPod too much for it to be out of commission.

    replying to DanteSpyke
    It's 2006
    okay. it's way rarer to get this sort of thing due to NIS 2006 than it is with 2005, but it has been known to happen.
    try the technique from the following bbecker post. (heads-up ... it's taking a long time for that post in that thread to load for properly for some folks. so leave it to think for a few minutes until it's loaded fully, otherwise you might not see the correct post.)
    bbecker1221: Re: Itunes doesn't start up after installing upgrade :SOLUTION

  • ITunes won't open after upgrading to 11

    My girlfriend's iPad mini is disabled, so I'm trying to connect it to her old macbook (10.6.8), the one which it is associated with.  Upon plugging in the iPad, I was prompted to update iTunes, because the iPad is running iOS 7 and needs the latest version of iTunes.  I said ok, and iTunes upgraded to 11.
    Now, iTunes will not start.  When i click on the icon, it bounces once and then nothing else happens.  I've tried restarting, creating new accounts, and deleting all the com.apple.itunes preference files, but it's not working.  What the ****?  I can't undisable the iPad because iTunes won't start.  How do I fix this?

    After updating to OSX 10.9.3, my iTunes won't open. If I try to drag it to trash, I get the message "iTunes can't be modified or deleted because it is required by OS X".

  • ITunes won't open and a Windows error message pops up

    I downloaded iTunes 10.2.2.12 awhile ago.  It worked fine the first time.  Ever since then, whenever I plug in my ipod, my laptop recognizes and says it's syncing but iTunes won't open.  I double click on iTunes and I get an error message from Windows saying that an error has occurred and it needs to close iTunes but it never even opens up.  (The message doesn't give any error codes.)  I've tried completely uninstalling iTunes and all its components and then reinstalling it but I get the same error message.  I have Windows XP 2002 Home Edition SP 3.  Please help.  Thanks.

    Many thanks.
    Yes, it is an "iTunes has encountered a problem" error.  The ModName: dnssd. dll        The ModVer: 2.0.5.0     Offset: 0000246c
    With that one, by way of experiment, let's try disabling your Bonjour Service.
    In your Start menu, right-click My Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Perhaps maximise the screen to better see what's going on.)
    Right-click the Bonjour Service and select "Properties".
    In the General tab, set the Startup type to "Disabled":
    ... and click OK.
    Restart the PC and try launching iTunes again. Does it launch properly this time?

  • Just did the iTunes update that iTunes said was available now iTunes won't open, keep getting Runtime Error message.  R6034 An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.

    Just did the iTunes update that iTunes said was available, now iTunes won't open.  I just keep getting a Runtime Error message. 
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.
    Is anyone else having this problem?
    I tried to re-install and got the following message:  iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 1114)
    Does this mean I have now lost everything?

    I just had the same error: 
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.
    I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says.  I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
    Good luck!

  • ITUNES WON'T OPEN AND GIVES AN ERROR MESSAGE HELP

    my iTunes won't open, and instead pops up a window saying:
    "The iTunes application could not be opened. An unknown error occured (-200)."
    Something similar to this is happening with my mac DVD player. When I try to open that, it won't open and says:
    "There was an initialization error. The audio output device could not be found. Please make sure speakers or an appropriate output device is connected. [-70027]"
    doesn't come in to handy when you are about to watch a new episode of Lost .
    anyway, I saw the speaker thing and went online. Any sound online (music, popups) can all make sounds - so my computer isnt permanetly muted. I've also restarted my computer, done the system updates, and gone into system prefereces to mess around with the volume. The computer recognizes the internal speakers. HELP!

    Hey,
    Here are the steps that should help:
    1. Close all applications.
    2. Go into the Finder>Home>Library>Preferences
    3. Delete 'com.apple.iDVD.plist' and 'com.apple.iTunes.plist'
    4. Restart Immediatley.
    This should work. Cheers, Ricky.

  • ITunes 10.5 won't open after upgrade NO ERROR MSG

    I upgraded to iTunes 10.5 yesterday on my laptop running Windows XP 32bit.
    Download and install went ok, but when I try to open iTunes it just won't load.
    There is no error message or pop-up - the hourglass icon appears briefly, and iTunes.exe comes up in the Windows Task Manager for about three seconds and then disappears.
    Tried uninstalling and reinstalling, as well as repairing in Control Panel>Add or remove Programs, but still have the same issue.
    I should mention that Quicktime opens just fine.
    Please help and thanks so very much in advance!

    iFOUND the Solution!!!
    Go to Add/Remove Programs under Control Panel and for every program that is Apple - iTunes - Quicktime related RIGHT click on it and choose "Repair" and repair it. May take some time for each program.
    Then, I got an error message saying:
    "the file "itunes library.itl" cannot be read because it was created by a newer version of itunes."
    Here, from the Start Menu, search "Apple Software Update" and update every program it says needs updating. I recently this week updated Quicktime to its latest version, but did so anyway. So I updated Quicktime and iTunes...restarted computer...and it worked.
    That's how you do it. iTunes 10.5 works fine now. Hope it does equally well for you.

  • Itunes won't open after upgrade

    i upgraded to the latest itunes yesterday morning and now itunes will not open. i can get quicktime to open. i have tried everything it says on the itunes website, i have turned off NAV and still it will not launch...grrrr. what can i do?

    The 208 error is from the authorization file being corrupt. Make sure you are set up to view hidden files.
    http://discussions.apple.com/thread.jspa?messageID=816513
    After having checked my other computer for what files had been altered or created this last day (during thich i had successfully authorized it for playback in preview and for purchased music) i found the file "SC Info.sidb" under "X:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info". This appears to hold your authorization keys or some other magic stuff. By deleting this files parent folder, iTunes was forced into asking me to authorize this computer again for playback, with the difference this time that there were some other options on the authorization dialog, just like there should be when for the first time authorizing a computer to play protected iTunes content. When I then entered my information as always and was expecting to see the same -208 error, i was instead greeted with sweet opera that I had been longing to listen to.
    P.S. It's voilà, not walla (giggling)

  • ITunes store won't open after Update - NO Error message!

    Hello everyone!
    This morning I updated my iTunes to 11.1 upon being prompted (when I tried to connect my new iPad Mini). I run Mac OS X 10.6.8. The macbook also updated other softwares (auto update). I restarted my laptop, and now the iTunes just won't open. The first time I click it in the dock, the icon would just bounce thrice before settling down, and then nothing happens. Upon clicking again, it would bounce just once, but nothing opens. There is no error message either.
    I have tried restarting, and also tried software update for the OS. I have checked the parental controls and administrative powers for the user.
    Kindly help!

    Jason,I used the troubleshooting link you gave and so far have 1.Fixed Digital Signing for Windows drivers.(didn't help) 2.Removing Itunes configuration files.
    In this one I was told to delete the SC info.sidb file (I didn't have one of these when I got to the folder where it was supposed to be)The thing I haven't done is the mscofig.instruction. I was saving it for last as it sounded like it could really make a lot of changes to my computer.The Itunes installation icon is still on my desktop so I clicked on it and there was a link that said it would repair missing or damaged files in the Itunes software. It didn't help either. I can click on Itunes all day long and it won't open.I can't access the library either. I am going to do the last step you suggested and uninstall my security software and see if that helps. I appreciate all the help Jason.

  • ITunes won't open after upgrading to 8.1.1

    I just installed iTunes 8.1.1 and now iTunes will not open on my computer. When I try to open it, it opens for about half a second then disappears, giving me the message that "iTunes has encountered a problem and needs to close." I have tried restarting the computer, defragmenting, and reporting the error, but nothing is having any impact. What should I do?
    I have a Dell with Windows XP and have had iTunes for a few years with no problems.

    Try
    1. Totally remove iTunes and QuickTime
    see
    http://support.apple.com/kb/HT1926
    2. then you will need to do a "deep clean" of registry
    by this I mean a registry search for itunes and delete any and every key you find
    *however if you do not know how to do this safely don't try it*
    unfortunately the registry cleaners do not clean to this level
    and itunes leaves considerable detritus in the registry which can screw up updates and or reinstalls
    Apple needs a cleaner similar to Norton's effort which has similar problems. Their tool removes ALL evidence of a previous anti virus installation which is what the above solution achieves in iTunes

  • ITunes Won't Open After Upgrading

    I have tried everything mentioned in the other threads but nothing seems to work for me. Everytime I open itunes it would show the hour glass then the hour glass would just go away and nothing happens, when i check my task manager, itunes is running on the process tab but not in the applications. here are the things that i have done so far.
    1. msconfig (instructions from the troubleshooting guide).
    2. created new user account profile.
    3. uninstall, restart, reinstall. (i even removed everything related to itunes in the registry before reinstalling itunes).
    4. checked for possible virus infection.
    5. uninstalled antivirus (AVG).
    6. microsoft updates.
    hope someone can help me soon.. i need to add new songs to my ipod. Thanks in advance

    Silent launch failure like this is commonly due to a problem with cryptographic services.
    Here is a method for investigating the problem and hopefully making a diagnosis:
    Before checking if iTunes works, restart your PC or close the iTunes.exe process with task manager if it is running.
    A couple of simple things to try:
    http://support.apple.com/kb/TS1776?viewlocale=en_US
    Stop the bonjour service, this FAQ has instructions:
    http://support.apple.com/kb/HT2250?viewlocale=en_US
    But usually it is due to a problem with cryptographic services.
    Check to see if you have your smart card service and that it is not set to disabled. For some reason iTunes needs it.
    Start>>Run>>Services.msc
    you should find the smart card service in the list. Report back with your findings.
    Malware can interfere with cryptographic services and also pervert a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
    Then work through *Method 4* in the following link:
    http://support.microsoft.com/kb/822798
    You should be able to copy and paste the individual lines to save on typing.
    Make a careful note of any error messages you get, they are important for diagnosis. Report back any error messages especially the names of any dlls mentioned.
    If there are no errors try starting iTunes.

  • ITunes won't open after upgrading to OSX Mavericks

    I've just upgraded to Mavericks on my Macbook Pro and after completing the installation iTunes 11.1.2 will not open any more. When I try to open iTunes the software name shows in the upper right corner as normal, but a blank box with an "ok" button pops up (See attached screenshot). When ok is clicked it shuts down anything iTunes related. This happens even if you click on a song to play. If you click on the song description window play icon the song plays, but still no iTunes.
    I've tried deleting iTunes, but but get another popup stating iTunes is a OSX requirement. I'm now in the process of downloading iTunes to see if it'll install and possibly "repair" and will update if that solves the problem.
    Any guidance will be greatly appreciated.

    The option key... I've been holding down the command key... No wonder that didn't work. I should really be writing this stuff down!.
    Regardless, Downloading and reinstalling iTunes did the trick.
    Thank you mende1 & saffron63 for the assist!

  • Itunes won't open after upgrade to 10.6.8

    I recently backed up my Macbook using Time Machine. I took the Macbook to Apple to wipe the hard drive and install OS X 10.6.8
    When I got home, I used Time Machine to bring my files and settings back onto the Macbook. I then tried to open iTunes, and now get the following message:
    "The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
    I try to download iTunes, but it gets stuck right at the end of downloading. I have to then quit the download.
    Any suggestions?

    Today i installed Snow Leopard.  iChat was working.  Installed updates and now iChat is not working.  Same error as listed above.  Any ideas?

  • TS1776 ITunes won't open after upgrade.  Any ideas?

    Anyone having trouble with the new itunes download?  I did everything on this site and I still can't get it to open. I'm still having problems getting ITunes to open.  I have purchased an IPad and the music has converted over to the IPad but I can not get it to open on my laptop. 

    Hi, Stephpruitt. 
    There are a couple of things you can try.  The first would be to reset all settings.  Go to Settings > General > Reset > Reset all settings.
    If the issue persists, try signing out of all services that require signing into your Apple ID and then signing back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H.

  • My Itunes won't open after a failed attempt at upgrading.

    My ITunes won't open after a failed attempt at upgrading.  Keep getting the error message...Failed to start because MSVCR80.dll was not found.  I have tried uninstalling and reinstalling and notheing works.  Help!

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

Maybe you are looking for

  • AS2 Receiver CC SSL Details

    Hi, My scenario is idoc to EDI Invoice scenario, but we are using HTTPS protocol in receiver (AS2) adapter. When we select the HTTPS protocol it is asking below SSL Certificates 1. Server Certificate (key Store) 2. Private key for client Authenticati

  • Report generation using jsp

    I am developing a website using jsp on tomcat.The site required a number of online report generation option from database(mysql). My problem is- 1.how to generate different types of report other than simple html tag embedded within jsp . 2.How to sto

  • Fork Step in BPM scenario PI 7.1

    Hi All, I have a requirement where in i will have to collect 3 different messages coming from the source and then combine these 3 messages to a single message and sent it to Target System . To achieve this i came up with a BPM where in fork step was

  • Multiple POs included in single PDF

    Hi Gurus,    My client is having a functionality of sending Purchase Order through email. For a perticular user we are facing a problem. When he generate a email to be send to  Vendor the PDF is created with more than 6 Or 7 POs included in it.Which

  • Micey no worky. Sound Blaster Xtreme Ga

    IP35-EIntel Dual-Core E67502GB CorsairSound Blaster Xtreme?Gamer8600GT?Hi all. I just built this machine and installed the Xtreme Gamer drivers before the Realtek audio drivers. I then disabled the audio drivers for the Realtek onboard sound in bios