ITunes won't open because the library file is locked

The iTunes 4 Music Library file is locked, on a locked disc, or I do not have write permission, what do I do? It was working perfectly until I plugged in my iPod. I waited, the iPod did not appear. The computer then told me that I had improperly disconnected it, yet I didn't touch it. So at that point I did disconnect it. My computer froze, so I restarted it and now iTunes won't open. Help!

Megan hello,
welcome to the Apple Discussions open the iTunes folder in your Music folder and select the iTunes 4 Music Library file... type cpmmand - D and this will duplicate the file... put the original file on the desktop and change the name of the duplicate to be the same as one you just moved ... double/click on this file after the name change... if all is okay you can trash the file on the desktop later..
let's know if it all works again Megan .... TP

Similar Messages

  • ITunes won't open because the iTunes Library.itl file is locked

    Recently our motherboard died. When we replaced it, we also had to wipe our hard drive. We saved our files, including my iTunes library.
    I reinstalled iTunes today, but when I tried to open it, I got this error message: "The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file." I can't find a Library.itl file, and I don't know why it's locked. What am I doing wrong?

    How did you try searching for the ITL file?
    If you do find it (it should be in \My Documents\My Music\iTunes), right click on the ITL file. Uncheck the "READ ONLY" box and do the same for the iTunes Music Library.xml file.
    Or you can try holding down the shift key while iTunes is opening. Create a new library and name it NEW. Then at least you can see if iTunes will open.

  • My iTunes won't open on the new ios7

    my iTunes won't open with the new iOS7. it will start to open then crash.

    Hi Kori,
    Close all apps: Double click on the Home button, then swipe up on the mini screens displayed above each open app.
    Reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your iTunes will open.
    Cheers,
    GB

  • Itunes won't open because it says the file was created by a newer version

    I just got a new hard drive for my computer and the new operating system but now my itunes won't open and it says something about how the file can't be opened because it was created with a newer version. Help!

    Which operating system version?
    iTunes 10.7 - http://www.apple.com/itunes/download/
    iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

  • Itunes won't open because of newer version

    When I try to open my itunes it sits there like it is loading up then a message appears saying "The file 'itunes library' cannot be read because it was created by a newer version of itunes." what does this mean and why can't i open my itunes why?

    This error prevents iTunes from launching. The library file was modified to work with the newer iTunes version, so it is no longer compatible with the previous version. The good news, however, is that Apple does backup the iTunes library file into a subdirectory that you can use to revert back to the previous version.
    To recover a previous version of the iTunes Library.itl file, use the following steps:
    Open up your My Documents\My Music folder.
    We will first backup the current version. Rename iTunes Library.itl to something like iTunes Library.itl.bak.
    Go into the My Documents\My Music\Previous iTunes Libraries folder.
    You may see several files that start with iTunes Library and have a date included in the name. Copy the newest file in the folder.
    Go back to the My Documents\My Music and paste the file from the previous step.
    Rename the new copied file to iTunes Library.itl.
    Your library should now be restored to the previous version of iTunes, and you should no longer receive the message.

  • ITunes will not open because the iTunes folder can't be found!

    Okay, so I am trying to open iTunes and it is saying it can't open because the iTunes folder can't be found or created. The problem is it is RIGHT WHERE it is supposed to be, in the music folder. I click in and try, but it doesn't work. AT ALL. I'm more than a little angry. I just downloaded the latest iTunes, and I'm kind of upset bcause that is why it isn't working- it didn't have a problem before.
    Can someone PLEASE tell me what is going on and how I fix it?

    Try this.
    Press and hold the option key while starting itunes.
    Create a new library.
    Select your existing itunes folder in your music folder.
    With luck it will be happy now.

  • My songs won't play because the original file can't be found.  Please help.

    I cannot play any of the songs in my iTunes. Whenever I try to play a song an error message pops up. It reads, "The song could not be used because the original file could not be found. Would you like to locate it?" I have to search for the song on my hard drive in order for it to play. This process works but it would be very timely and tedious to go through each one of my 5300 songs to get them to play. Is there a faster way of doing this? Please help. Thanks.

    The "missing file" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then say no when asked to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions. I can provide a step by step guide if you give me the two paths.
    In some cases iTunes may be able to repair itself if you go through the same steps and locate the lost track. It may then offer to attempt to automatically fix other broken links. Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
    tt2

  • ITunes Won't Open Because of Quicktime

    I have a computer with Windows 7 Pro and I can't get iTunes to work correctly on it.  I was getting an error message that was saying that iTunes couldn't open because Quicktime wasn't installed.  However, quicktime is installed and working properly.  I've uninstalled everything related to apple and reinstalled it, and after doing that, iTunes worked, but today I started getting the same error message.  I'm not sure what the issue is because there doesn't seem to be an issue with Quicktime. 

    I'm going through the SAME ****. I install Itunes and quicktime seems to go ok until the end of the installation and then all **** breaks loose. Some error comes up saying that I can't install it. THEN It says the installation finished successfully. So I click finish and what happends now is that it specifies that I need to update my quicktime to open itunes... I dont care about Quicktime, i want itunes to work, anyone have a link to an older STANDALONE version of itunes? Where you don't need quicktime?
    -Jb

  • Ask your question.stalled 10.5 and update on my G4 PB and now Itunes won't open due to library created by nwer version, How do I get the old version back ? thankfully I don't have anything in it, having deleted everything for room for the new install.

    I just installed 10.5 and .8 update, from 10.4xx, Original 10.5 Archived and installed,   Now itunes won't, can't open due to "library created by a newer version error message,
    How do I fix this ? uninstall ??? reinstall ?
    I originally didn't have enough free space to intall the new OS so deleted everything/songs and some podcasts in itunes, backed up on another ipod.that hasn'r been updated so not missing anything, but now can't access\ another new(old) ipod and iphone (and not anytthing now) that wouldn't work on the old OS. due to not having the required itunes upgrade and not upgradeable on 10.4xx
    Thanks in advance.

    After reinstalling itunes like PowerBloodRespect said, go into itunes on your account and connect your ipod. On the ipod summary tab, uncheck the box to launch itunes when the ipod is connected.
    You also might want to go into itunes preferences on both accounts.
    On the Device tab, put a checkmark in the box to prevent ipods from syncing automatically.

  • ITunes won't open. New Library error appears

    I tried to open my iTunes library today and I got the message, "New iTunes Library," and no ability to open the program. I think I just completed the newest update a couple of days ago. I have no idea what to do to fix this problem. Please help me. I am super frustrated. Thank you.

    georgiamomma -
    There are a few things you could try,but what worked for me was to download a fresh installation file from apple.
    Your update got corrupted somehow. Doing the usual of going to control panel, clicking on Programs and Features, clicking on iTunes in the list and selecting REPAIR probably won't fix this issue, as sometimes repair reverts the installation to its previous version and then your iTunes Library.itl file can't open because it's from a newer version than the one REPAIR reinstalled. You can try that process, but I doubt it will work.
    Do not change any files and/or their existing locations. Also, do not uninstall iTunes from your machine. Simply go to Apple's web site and download their latest version suitable for your particular computer. Once downloaded, double click the installer and follow the prompts. You should be able to launch itunes afterward, and your library will magically re-appear.
    Again, DO NOT uninstall the old version, and do not rename, remove and/or replace any of the original files prior to installing the latest version over what's already on your machine. Good luck!

  • Itunes won't open because of error 13010 occurred

    All of a sudden when I try and open itune, it gives me this message: The iTunes application could not be opened. An unknown error occurred (13010).

    CaddyFan wrote:
    Try the following:
    1. Go to the following folder: username/Music/iTunes/
    2. Remove the following files from this folder:
    iTunes Library Genius.itdb
    iTunes Library.itl
    iTunes Library Extras.itdb
    3. Open iTunes.
    4. You will have to re-scan your media.
    No! Not the iTunes Library.itl file!! That is what makes your library.  Delete that and when you open iTunes you will get a blank, brand new library which will certainly take care of the issue because you will be starting from scratch (the media files will still be on the computer).  By "re-scan your media" this will mean adding it all again to the library, rebuilding your playlists, starting off with playcounts zero and no ratings.
    Caddyfan, I see you have systematically posted in quite a number of topics about this issue.  I hope you post a correction about this in each one, or if you did indeed mean delete the entire library file at least make it clear this will be a consequence of your suggestion.  It is also usually unecessary to post in topics which haven't seen a post in about a year.

  • ITunes won't open because target location is unknown.

    I've downloaded the new version of iTunes and when I try to open it up, it does nothing. I was curious so I looked in the properties and I noticed it has no TARGET LOCATION, hence it's inability to open. Also, where it says TARGET, it only says iTunes. It won't let me edit these in any way, so I'm so confused on what to do.
    Has this happened to anyone else?
    Thanks.
      Windows XP  

    Megan hello,
    welcome to the Apple Discussions open the iTunes folder in your Music folder and select the iTunes 4 Music Library file... type cpmmand - D and this will duplicate the file... put the original file on the desktop and change the name of the duplicate to be the same as one you just moved ... double/click on this file after the name change... if all is okay you can trash the file on the desktop later..
    let's know if it all works again Megan .... TP

  • ITunes won't open, because it "needs QuickTime 7.0.3"--but I have it!

    Same sob story, to a degree, that I've been reading about. BUT--when I click on the iTunes icon, it says it can't launch because QuickTime isn't up-to-date. That isn't accurate, because they download together! This is on a brand new computer, Dell Inspiron 6000. I have uninstalled the download and tried the CD that came with the Nano (an older version), and it installs but won't run, either. Just wants to send an error report to Microsoft each time I try to open iTunes.
    I've tried a lot, including choosing iTunes not be the primary audio player. QuickTime doesn't successfully install when I tried a separate installation.
    Running XP small business edition (just a souped-up version of Home edition). Computer also runs Microsoft Media Center...could this be part of the problem? I'm also running McAfee Security Suite.
    Anyone have any ideas on how to get this going?
    Dell Inspiron 6000   Windows XP  

    Well, then we need to get rid of every Quicktime reference on your computer and start anew.
    to Verify That All QUICKTIME Files Are Removed
    Go to: Start/Find/Files or Folders.
    Enter QuickTime as one word in the Name box.
    Click Find Now (be sure you are in the C drive of your computer).
    Confirm that the following files are NOT on your computer. If they are still on your computer, delete them.
    QuickTimeInstaller.ini
    QuickTimeInstaller.exe
    QuickTimeInstallCache.qdat
    then reboot your computer
    OR
    Close the program tray icon (lower right corner of taskbar) before trying to remove (or installing standalone)? ( or ctrl alt del and close these first: iTunesHelper.exe, qttask.exe)
    or:
    Start - Run - copy and paste this into the run box:
    C:\WINDOWS\unvise32qt.exe C:\WINDOWS\System32\QuickTime\Uninstall.log
    (check to see if there is a file "uninstall.log" in the C:\WINDOWS\System32\QuickTime folder)
    last resort (since you cant get rid of it anyway) -
    delete c:\program files\quicktime folder and c:\windows\system32\quicktime folder
    run regedit - delete these keys:
    HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Quic kTime
    HKEYLOCALMACHINE\SOFTWARE\Apple Computer, Inc.\QuickTime
    Then, try downloading Quicktime Standalone and see if iTunes will open up after that. Good luck and keep me posted either way.
    Rachyl

  • ITunes won´t open: because "secured Volume or no rights!"

    Something went wrong with iTunes on my MacBook, and though I´ve trashed and downloaded anew, it won´t open. It claims "iTunes is on a secured Volume or I have no access rights" (Finder Information shows I have the rights).
    Copying from the iMac did´nt help!
    I´m gratefull for any hints you can give me.
    iMac & MacBook ( 2*Intel core 2 Duo)   Mac OS X (10.4.9)  

    Megan hello,
    welcome to the Apple Discussions open the iTunes folder in your Music folder and select the iTunes 4 Music Library file... type cpmmand - D and this will duplicate the file... put the original file on the desktop and change the name of the duplicate to be the same as one you just moved ... double/click on this file after the name change... if all is okay you can trash the file on the desktop later..
    let's know if it all works again Megan .... TP

  • ITunes won't open because of computer settings

    I'm trying to install iTunes on my boss' computer so we can access his work-related iPad/iPhone app purchases. We keep getting the error "The iTunes application could not be opened. The disk you are attempting to use is full."
    This error made no sense to me because his hard drive has over 200GB free. I finally figured out that iTunes automatically creates folders in "My Documents" that it needs in order to open.
    The problem is that on campus, "My Documents" is universally mapped to an individual network drive - NOT the C drive. And this drive is too full to support iTunes.
    I tried manually moving the folder over to the C drive, but iTunes automatically recreates the folder on the networked drive when I try to open it.
    How can I change where iTunes does this when I can't access iTunes at all?

    I tried manually moving the folder over to the C drive, but iTunes automatically recreates the folder on the networked drive when I try to open it.
    Okay. Try instead creating a new library on your C drive, using the instructions in the following document:
    [How to open an alternate iTunes Library file or create a new one|http://support.apple.com/kb/HT1589]

Maybe you are looking for

  • Problem with http - serverlet interaction?

    Hi. I'm having a bit of problem with a HttpURLConnection. First of all, this isn't something I'm especially knowledgeable in, so.. Basically, I'm requesting a page that carries a token used for validating a form submission to prevent multiple posts.

  • Category names are not coming in Gantt chart

    Hi all I have a Gantt chart where I am displaying customer name in category axis. But instead of coming those names I am getting category1,category2.. in category axis.Please help. Regards Sunit

  • Digital Asset management

    Hi all, I've been using idImager to keep track of photos and videos. The one problem I have found with this product is setting it up in a collaborative environment. I was wondering what people are using to keep track of the digital assests and where

  • Two Internal tables to be displayed as separate ALV grid.

    Hi Friends, I have 2 internal tables say i_tab1 and i_tab2. I_TAB1 contains 10 records. I_TAB2 contains 15 records. My requirement is to display I_TAB1 with title 'Success Records' and ITAB2 with title 'Missed Records'. It should be done thro ALV gri

  • My url bar is gone? I cant type a website in. Help?!

    Probally something silly but please help!