ITunes Won't open in XP - error "Faulting application itunes.exe"

I had to reload factory settings to solve another problem, now iTunes won't launch - I get the "windows needed to close the application..."
error is "faulting application itunes.exe, version 6.0.5.20, fauling module unknown, verion 0.0.0. fault address 0x100001...

hmmmm. it's not the error message that i usually associate the following problem with, but it's worth checking on.
does your QuickTime currently launch? (itunes needs a functioning QuickTime in order to work properly.)
if it doesn't launch properly, let's try a standalone QuickTime 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Installers … get the one that doesn’t mention itunes 6
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

Similar Messages

  • Itunes won't open...error 2206..tried many time to uninstall and to install...any help?

    Itunes won't open...error 2206
    I have tried to uninstall and to reinstall...still won't open.
    Any suggestions so i can use my itunes library again?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • My iTunes won't open! It keeps saying 'The iTunes Library.itl is locked on a locked disk or you not have write permission for this file.' Please Help!

    My iTunes won't open! It keeps saying 'The iTunes Library.itl is locked on a locked disk or you not have write permission for this file.' Please Help!

    this may happen on external drives if:
    The external drive was hotpluged (removed) without going the correct "eject" way
    The iTunes library (database) got corrupted
    First Aid for external drive
    Close iTunes
    Unmount (eject) external drive the right way.
    Mount drive again
    Go to Workplace -> right click external drive -> choose "clean up" This will force the filesystem to rescan the file structure of the drive and rebuilding the file system table and journaling file.
    After the tool shows "done" (could last some time depending on size of drive) restart iTunes
    If your iTunes library is on your internal drive, this may happen
    The system was not shoot down correct, e.g. "pulled the plug"
    The iTunes library (database) got corrupted
    First Aid for internal hard drive
    Close iTunes
    Reboot system
    Go to Workplace -> right click external drive -> choose "clean up"
    After the tool shows "done" (could last some time depending on size of drive)
    Reboot system, restart iTunes
    If none of the above fixes your problem, post here.
    Lupunus

  • ITunes won't open, I get this message: The iTunes Library .itl file is locked, on a locked disk or you do not have write permission for this file.

    iTunes won't open.
    I get this message: The iTunes Library .itl file is locked, on a locked disk or you do not have write permission for this file.

    This may indicate a corrupt preference file with iTunes trying to open the wrong location. Try holding down shift as you launch iTunes then choose the correct file, normally <User's Music>\iTunes\iTunes Library.itl. See iTunes: How to open an alternate iTunes Library file or create a new one.
    tt2

  • Itunes won't open, music gone after installing ipod/itunes software again

    I was using itunes to purchase music and burn it to cds. I recently got a nano and tried to install the software last night. Now Itunes won't open, and I don't even see any of my downloaded music on my computer. It's possible that it's a problem with my computer, but we're also looking into the issues reported with Norton, etc. I should know more by tonight. My question is how do I get my music back if it was somehow deleted by this process? Obviously I've already purchased it, but I don't remember all the songs and I didn't have a backup.

    You need to search your hard drive(s) and recycle bin for the music files.
    Purchased music will always have a .m4p file extension.
    Without a backup, if the files are gone, the music is gone.

  • Application Error Faulting Application RWRUN60.EXe

    Dear Guru,
    Platform : WINDOWS 2003 Server + ORACLE APPS FINANCIAL
    We frequently receiving the following error message in Windows 2003 Event Viewer in Error category:
    _{color:#ff0000}"Faulting Application RWRUN60.EXE, version 3.0.0.0, faulting module ORA805.DLL, version 0.0.0.0, fault address 0x000b4fa4"_
    _{color}_
    This happens when report server try to send alert emails.
    Please help us..
    Regards

    * change: Tried recreating a service using Rapid install scripts
    * cause: File ORA805.dll has become corrupt.
    fix:
    1. Rename the existing copy of ORA805.dll as ORA805_old.dll
    2. Locate a good copy of ORA805.dll in another instance.
    Copy the good ORA805.dll file, to the location shown in the core dump file.

  • I did an update today to my itunes WITHOUT my ipod and now itunes won't open.  The error message says it is corrupted.

    I did an APPLE update today and now my itunes will not open.  It give an error message of corrupted.   What can I do to open it??  The message was still he same when I plugged in my ipod.  This happens with almost every update.  Thanks.

    See Troubleshooting issues with iTunes for Windows updates. Use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
    tt2

  • ITunes won't open.(No error message)

    Every time I try opening iTunes, it loads for a few seconds. I can see it in my processes. After the few seconds it disappeares. I'm not too sure if something is blocking it. I don't have an anti-virus running at the moment, so it isn't that. Can anybody help me out with this problem? I have also tried re-installing.

    Not too sure on how to edit.
    I believe this started when I updated iTunes. I'm gonna try installing te previous iTunes version.

  • ITunes won't open its says "this version of iTunes has not been correctly localised for this laungage. Please run the English vresion" hep

    IiTunes won't open says it is wrong langage and to run English version. I am trying to open in windows.
    Apple is

    Try moving the file C:\Users\<User>\AppData\Roaming\Apple Computer\iTunes\iTunesPrefs.xml out to your desktop then start iTunes. This will force iTunes to create a new preference file which may do the trick. You will need to review your iTunes preferences after doing so in case you made any changes to the default settings that you need to reset.
    tt2

  • My iTunes won't open, it shows a please reinstall iTunes message.

    So, i updated my itunes file when the message popped up, but after i restarted my computer like i was told to do by itunes, it would no longer open. the following message pops up: " This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
    the problem is, i have over 1000 songs and most of them came from CD's that i borrowed from friends and such. only a handful of songs have i bought straight from the iTunes store. I do not want to lose these. is there anyway to preserve these songs, but still get itunes running like normal? if so, how?

    " This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • ITunes won't open. it says "Error 7 iTunes was not installed correctly" I know I did though. Now what? Should I uninstall? I don't want to loose my music!

    I have the latest version of iTunes and when I went to go open it, it can't! It says: "iTunes was not installed correctly. Please reinstall iTunes.Error 7 (Windows error 126)"  What do I do now? Should I uninstall and try installing it again? I don't want to loose any of my music and info. PLEASE HELP!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (100023)

  • Itunes won't open because of error 13010 occurred

    All of a sudden when I try and open itune, it gives me this message: The iTunes application could not be opened. An unknown error occurred (13010).

    CaddyFan wrote:
    Try the following:
    1. Go to the following folder: username/Music/iTunes/
    2. Remove the following files from this folder:
    iTunes Library Genius.itdb
    iTunes Library.itl
    iTunes Library Extras.itdb
    3. Open iTunes.
    4. You will have to re-scan your media.
    No! Not the iTunes Library.itl file!! That is what makes your library.  Delete that and when you open iTunes you will get a blank, brand new library which will certainly take care of the issue because you will be starting from scratch (the media files will still be on the computer).  By "re-scan your media" this will mean adding it all again to the library, rebuilding your playlists, starting off with playcounts zero and no ratings.
    Caddyfan, I see you have systematically posted in quite a number of topics about this issue.  I hope you post a correction about this in each one, or if you did indeed mean delete the entire library file at least make it clear this will be a consequence of your suggestion.  It is also usually unecessary to post in topics which haven't seen a post in about a year.

  • Itunes Won't Open Send an error report!

    Hi I've just downloaded Itunes 6.0 and when I try to open it I get 'Itunes has encountered and error and needs to close send an error report?' I have read up on this and discovered that it may be a quicktime error so I went and downloaded quicktime seperatly with no luck. Then I read it may be C:\documents and settings\all users\application data\apple computer\itunes\sc info so I deleted it. No luck... does anyone else have any ideas? It stopped working when I downloaded the latest ipod update software for my ipod mini then it all stopped working I reallly need it to work for tommorow because I'm going on a long car journey and I want to be able to listen to my ipod. Thanks.
    Regards Ruairidh McHardy

    Have you had a look at these troubleshooting pages? They may be of some help:
    iTunes for Windows: Troubleshooting unexpected quits, freezes, or launch failures
    iTunes for Windows in Windows XP or Windows 2000 doesn't open after upgrading

  • ITunes won't open from windows - error message

    Every time I try to open iTunes or Quicktime from my desktop or anywhere else, this message something like this comes up: "Windows has encountered a problem and must close iTunes. Sorry for the inconvenience. Please click here to send an error report." Because of another problem on my computer, which has already been fixed, I have had to reinstall all my progams recently, including iTunes, but after installing and reinstalling a number of times yesterday, it cannot open. Other programs, like skype, are all working fine. Can someone help me figure out why my system can't open iTunes?

    Have you had a look at these troubleshooting pages? They may be of some help:
    iTunes for Windows: Troubleshooting unexpected quits, freezes, or launch failures
    iTunes for Windows in Windows XP or Windows 2000 doesn't open after upgrading

  • Itunes won't open - referenced memory error

    I too cannot get itunes to open. Keep getting an error message regarding referenced memory that cannot be read. The instruction is different each time - first it was 0x0b011200 then 0xf80114ed then 0x97011534 - then is has the click ok to terminate or cncel to debug - no matter which I do it doesn't open.

    Check your hard drive space? Perhaps you're low on space there.
    Maybe the change from 6 to 7 duplicated some of your songs (I know my library had some duplicate songs, however I cannot confirm the cause or time of duplication since I hadn't cleaned out my Library for a week or so).

Maybe you are looking for

  • Problem when creating a sales order using BAPI_SALESORDER_CREATEFROMDAT2

    Hello All, I am working on a requirement where i  need to create a new sales order from old sales order (Not all the items of the old sales order are to be copied) i am doing this by getting the data using BAPISDORDER_GETDETAILEDLIST to get the old s

  • Why are songs I bought not listed in the purchased link

    some of the songs that I've bought from itunes are listed in the purchased section, available for me to listen to, but not all.  is there something I can do about this?

  • IDVD burning blank dvds

    To start off, here's my specs: Macbook Pro Mac OSX (10.6.5) iDVD (7.0.4) Every time I try to burn a DVD it always says that the file exceeds max content. I then go to Project Info and change the encoding setting to either High Quality or Professional

  • XML parser Problem in Oracle 9iAS

    Dear All, I am trying to parse a xml file by using a SAX Parser. I am getting error "oracle.xml.parser.v2.XMLParseException: Invalid InputSource.'. I have already included 'xerces.jar' in the classpath. But it is always taking oracle xml parser. How

  • Logical Vs Physical Data Model

    Hi guys What is the difference between logical data model and physical data model.