ITunes won't recognize devices

I have an iPod Nano, which is the first device that I have connected to iTunes, and it works fine with it. Recently, however, I got a new phone with iTunes on it-I start iTunes and plug in the phone (USB), and Windows recognizes it and installs it as a USB Mass Storage Device (E:)...it won't show up in the list in iTunes as it is supposed to.
I just got a iPod Shuffle, and I have the same problem with that. When I plug it in, Windows recognizes it as a USB Mass Storage Device, and installs the drivers and stuff-but doesn't show up on the iTunes list. I have the latest version of iTunes. So in short, iTunes recognizes my first device, but not the other two (phone and Shuffle). Any ideas?

I'm having the exact same problem since I updated iTunes a few days ag, it wont recognise any of my Apple Devices but my PC will recognise them when I plug them it on the device it Trust this Computer comes on the Screen, It won't sync anything, I guess you've updated too. I'm also on Windows 8

Similar Messages

  • I deleted something off finder now itunes won't recognize device

    i deleted a file off itunes and now itunes won't recognize them what should i do??

    Without you telling ua the name of the file you delete there isn't much we can do to help you.
    If you don't know the name of the file, your only alternative would be to take it to the Apple Store and ask them to fix,
    Allan

  • My IPhone stopped working right after I did the most current update, yesterday.  The screen has a picture of the usb cord, pointing towards the ITunes logo. I cannot use the phone at all.  I have tried turning it off and on.ITunes won't recognize device

    Hi there,
    Can someone please help.  My IPhoneS stopped working right after I did the latest update which was yesterday.  Now, the phone does not work at all.  When turned on, the screen shows a picture of USB cable pointing to the ITunes logo.  I have tried just about everything, and cannot get it working. It's like it is frozon.  My ITunes does not recognize my device.  Cannot dial out either. I desperately need to get it working.  Can someone please help me. 
    Thanking you in advance for your help.  :-)

    The update did not do anything.
    AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
    The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
    Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network.

  • Itunes won't recognize device, nor ipad 2 or ipod. Itunes 64 bit on win 7 64 bit.

    Everytime i try and sync the ipod or ipad it says that i don't have the required software for syncing. Therefore i should uninstall and reinstall itunes 64 bit. I have tried severall times but it won't work. I am very annoyed because it has never happend before. Please can someone help me?

    It may have something to do with AMDS not started.
    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • Itunes won't recognize devices anymore on windows 8

    it worked last month but not now. Why?

    Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
    http://www.apple.com/itunes/download/

  • I have music on my iTunes library that I want to put on my iPhone 4S, but when I plug in my phone to my computer, my device does not appear in iTunes. It is connected to my computer, but iTunes won't recognize it...

    I have music on my iTunes library that I want to put on my iPhone 4S, but when I plug in my phone to my computer, my device does not appear in iTunes. It is connected to my computer, but iTunes won't recognize it... I have restarted my phone and computer, uninstalled itunes and reinstalled it, and punched a wall. idk what to do..

    Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this

  • IPod is disabled. Says to connect to itunes however itunes won't recognize the device. What do I do?

    IPod Touch is disabled. Its says to connect to itunes however itunes won't recognize the device. What do I do?

    Place the iPod in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • Just updated my iPhone.  iTunes won't recognize my iPhone. I get "internal device" problem.

    Just updated my iPhone.  iTunes won't recognize my iPhone. I get "internal device" problem. Help!

    Haven't heard back from them. Took it the adapter to the Apple Store with one of the mics and the Blue Shirts said it was the proper adapter.

  • Itunes won't recognize Iphone but device still charges

    Today, I had my Iphone 5c replaced after having issues with the software on my previous iphone 5c. I'm trying to put the data that was on my previous phone back onto my new replacement but Itunes won't recognize my device. I have tried getting the data back on my phone using Icloud but the backup data that is for my Iphone can't be selected as the backup data requires software that is ios 7.1 or later (or something like that). I have selected the option of "set up as new iphone" and just downloaded the software update but I don't know how to get back to the screen that shows the icloud backups.
    I have also tried all the recommended things for when the device cannot be detected with itunes (ex. reinstalling itunes, restarting apple mobile device support< ect.)
    If you can help with how I can get my itunes to recognize my iphone or how i can set up with icloud after selecting "set up as new iphone" that would be great

    Set the phone up as a new phone. Then update the iOS to 7.1. After the update is complete restore your phone from your backup.

  • Ipod stuck in recovery, and iTunes won't recognize the device.

    My ipod is stuck on restore/ recovery mode, and iTunes won't recognize the device. The computer makes the beep noise saying that somethin is plugged in but itunes won't pick it up. It is iTunes 11.1.1 and i have a 5th generation Ipod touch. Any Help? Thanks (:

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar              

  • How do i fix my upgrade error ? iphone 4 won't turn on to reload and itunes won't recognize

    HELP! - I just tried to upgrade my iphone4 to iOS 5.1.1 and an error occured sometime thereafter. Now my phone is stuck in that initial (plug usb -----> itunes) graphic/picture thing you see when you turn your iphone on for ther very first time. I have windows vista, and to make matters worse, my itunes won't recognize my phone to finish 'the job'. ***?  PLEASE HELP SOMEONE WHO KNOWS!!

    Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    Device Not Recognised
    http://support.apple.com/kb/TS1538

  • Itunes won't recognize my ipod nano 2nd gen anymore?

    itunes won't recognize my ipod nano 2nd gen anymore. it just charges it???

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • Just upgraded macbook to Snow Leopard, and now itunes won't recognize my iphone.  I tried turning all off, and on.  I have the newest version of itunes.  Will I have to reset my iphone (and also ipod touch?), and if so, does it mean I lose anything?

    I just upgraded macbook to SnowLeopard 10.6.3 and now itunes won't recognize my iphone.  I tried turning everything off and restarting.  I have the latest version of itunes.  If I have to reset the phone (and ipod touch), what does that mean?  Will I lose anything? How long will it take?  thanks

    Start iTunes.  Make sure you really are running the version you think you are.  Sometimes people end up with two copies, different versions.
    Mac OS X v10.6: iOS device not recognized in iTunes after restart - http://support.apple.com/kb/TS3540
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
    Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311  - read section on Opening iTunes for information about running multiple copies of iTunes.
    You say you are running Snow Leopard 10.6.3.  That version will not run the latest iTunes which requires 10.6.8  If you need iTunes 10.7 you have to be running 10.6.8
    Mac OS X 10.6.8 Update Combo v.1.1 - http://support.apple.com/kb/DL1399
    Message was edited by: Limnos

  • Itunes won't recognize my ipod old or new one

    Itunes won't recognize my Ipod classic. It woudn't recognize the old one, Apple store said it was the Ipod so I bought a new one but it won't recognizethat one either

    Hello crickettspeed,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Try the iPod troubleshooting assistant:
    If you haven't already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below.
    2. Restart the iPod Service
    3. Restart the Apple Mobile Device Service
    4. Empty your Temp directory and restart
    5. Verify that the Apple Mobile Device USB Driver is installed
    6. Change your iPod's drive letter
    7. Remove and reinstall iTunes
    8. Disable conflicting System Services and Startup Items
    9. Update, Reconfigure, Disable, or Remove Security Software
    10. Deleting damaged or incorrect registry keys
    Best of luck,
    Mario

  • My iTunes won't recognize my new iPhone + "AppleMobileDeviceHelper" error

    I bought a new iPhone and already have an Apple ID & Password & iTune account. When I plugged my new iPhone I kept getting a "AppleMobileDeviceHelper" error messages. They keep popping out. Plus iTune won't recognize my Apple ID (I don't want a new one, since it has the payment info and all). Anyone can help?

    You might need to remove and reinstall the Apple Mobile Device Service. Check out this article:
    http://support.apple.com/kb/HT1747

Maybe you are looking for

  • Need help connecting my nokia 6708 to pc

    Pls help as i don able to connect my 6708 mobile to pc as no driver or pc suit i hv for the same pls help jayesh

  • Playing movies in front row of an ext hdd

    I want to buy a mini as a media centre where i can rip my dvds into however because of the mini small int hdd i wanted to buy a 250gb ext hdd and put the dvds in there but can i somehow move the movies folder to the ext hdd and play the stuff of from

  • Adobe Reader X Read Out Loud Problem

    I had the previous version of Adobe Reader, and it had a problem. About ten seconds after I opened it, it would pop-up a error window and crash. Naturally, I uninstalled and then installed Adobe Reader X, which looks great, but when I tell him to rea

  • Dynamic interface

    Hi guys! I've created a variable which gets file name. I'd like to buil an interface based on this file name. File name is the source (so its dynamic), target is constant. I don't know how to map this dynamic file into target datastore. I've tried #F

  • Wireless IP Phone 7926G Showing active Load ID as Unknown

    Dear All, I am running Cisco call manager 8.6[.2.23900-10]. The issue is that Cisco wireless IP phone 7926G showing its  Active Load ID as Unknown on call manager.    But its showing perfect [CP7926G-1.4.5SR1.3] on device. Please guide me to fix this