ITunes won't recognize iPhone (3G), restored with another pc and worked once but not anymore, help please

- I changed a new case, battery and a headphone jack, after that iTunes didn't really wanna recognize my iPhone
- I've had the same problem earlier too, before ^that
- I have the latest version of iTunes
- I've tried to remove all USBs and reconnect iPhone many times, and rebooted both PC and phone
- I had the error 1611 while trying to restore on my PC -> I tried on another computer, worked
- my PC's iTunes recognized my iPhone once after restoring but not anymore
This is really annoying, I would be so thankful if you can help me.

+ I have reinstalled my iTunes.

Similar Messages

  • HT1386 I cant download a playlist from my itunes (PC) to my iPad it worked once but not anymore ?

    I cant sync my playlist from itunes (pc) to my ipad ? It syncs drop box but nothing else

    Hello JLHINC,
    Thank you for using Apple Support Communities!
    I have a few things to recommend here. First if you havent already, restart the iPhone and computer and try again.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Next, if needed I would backup your device to iTunes and restore it.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Take care,
    Sterling

  • My itunes says that my iphone is synced with another itunes. It gives a name but how do i find out which library it is? I working with 2 computers trying to get music off of one and on to my new one.

    My itunes says that my iphone is synced with another itunes. It gives a name but how do i find out which library it is? I working with 2 computers trying to get music off of one and on to my new one.

    See Recover your iTunes library from your iPod or iOS device and this migrate iTunes library post.
    tt2

  • Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow Lepard it work just perfectly... help please.

    Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow lepard it work just perfectly... help please.

    Reinstall MacFuse with the one from http://www.tuxera.com/mac/macfuse-core-10.5-2.1.9.dmg. If that doesn't work, you can use Paragon NTFS for Mac 9.0 which has been designed to work with Lion.

  • I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

    I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

    Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot).  It also does not show up in the ;ist of pritnters, scanner when I open Image Capture.  I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below:  Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

  • Itunes won't recognize Iphone but device still charges

    Today, I had my Iphone 5c replaced after having issues with the software on my previous iphone 5c. I'm trying to put the data that was on my previous phone back onto my new replacement but Itunes won't recognize my device. I have tried getting the data back on my phone using Icloud but the backup data that is for my Iphone can't be selected as the backup data requires software that is ios 7.1 or later (or something like that). I have selected the option of "set up as new iphone" and just downloaded the software update but I don't know how to get back to the screen that shows the icloud backups.
    I have also tried all the recommended things for when the device cannot be detected with itunes (ex. reinstalling itunes, restarting apple mobile device support< ect.)
    If you can help with how I can get my itunes to recognize my iphone or how i can set up with icloud after selecting "set up as new iphone" that would be great

    Set the phone up as a new phone. Then update the iOS to 7.1. After the update is complete restore your phone from your backup.

  • Itunes won't recognize iphone 3gs after upgrade to IOS 5

    Backup for Iphone on itunes was made on DELL INSPIRON MINI 10 laptop running XP Professional, Thursday evening 10-13-2011.
    Upgraded Itunes to new system (ios 5) Friday evening 10-14-2011.
    Connected Iphone to laptop Saturday afternoon to sync and upgrade phone to ios 5. after 2 hours phone was wiped clear, and itunes dropped recognition icon from list. several attempts were made to re-sync. all failed, itunes would not recognize. ended up restarting phone and installing upgrade on another computer. Laptop still failed to recognize.
    attempted upgrade to Ipod and it locked up on "Disconnect before removing'. opened Itunes dropdown and selected 'Diagose devise' and was able to restore ipod and sync with itunes. afraid to attempt 'diagnose' with iphone, now that it is working.
    back-up for iphone still appears on itunes,,,, just can't back it up...XP is unable to 'ICloud' and my DELL Window Vista Home Premium won't install updates so ICloud won't load....

    Help please - my computer does not recognize iPhone after upgrading to IOS4 and iTunes 9.2 ---- I have WIndows 7 --- have tried EVERYTHING and still it does not work. I want to do my albums via the computer, not iTunes since it adds the Photo Library folder, which is a duplicate of all my picture folders.
    Does anyone have a real solution please? I have uninstalled, installed, deleted drivers, installed drivers - the computer says the drivers are working, but obviously not.
    When is Apple going to post the solution so that people will know what to do - seems everyone has an idea, but none are working for me and the extra photo folder frankly drivers me crazy ---- something about iPod cache ----- do not want duplicate pictures.
    And, will albums be able to be edited - can these pics not be sent to Facebook.
    I know, several topics ----- what a mess Apple has created with IOS4 and iTunes 9.2. Ready to send the phone back!

  • ITunes won't recognize iPhone 5 after I attempted to download iOS 7

    I tried to download iOS 7 and I got an error message and iTunes said the update failed. Since that moment, my phone has shown the iTunes logo with the cable, prompting me to plug my phone into my computer and sync it with iTunes. Conveniently enough however, iTunes won't recognize my iPhone when I plug it in, but it will recognize my iPod touch when I plug that in to the computer. I have restarted my computer, reinstalled iTunes numerous times and yet nothing has worked. So essentially I have no ability to restore my phone and no ability access it in any way shape or form.....any help?!

    What version of iTunes are you running?
    Allan

  • Update failed. Now iTunes won't recognize iPhone.

    I connected my iPhone 4s to my computer, and iTunes prompted me to update my iphone. I initiated the update and awhile later the update failed and now my phone only shows a picture of the phone's cable with an arrow pointing to the iTunes logo. Whenever I plug it in, iTunes does not recognize it. I have gone throught the basic fixes suggested, but the issue remains. I have completely uninstalled and reinstalled iTunes, I have restarted Apple Mobile Support, I have reinstalled the Apple Mobile Device USB Driver. I don't know what else to do.
    I am using Windows 7.

    I really wasn't sure what on my computer was causing the problem, but I just used another computer whose iTunes recognized my phone, was able to restore it to factory settings, and then my computer's iTunes recognized it once it was no longer in recovery mode, and I was able to return my iphone to normal with a previous backup.
    Thanks for trying to help.

  • ITunes won't recognize iphone apps

    I went to update some apps through iTunes (USB) with OS-X 10.9.5 to iPhone 5s with IOS 8 and it sees the apps but won't let me make changes to them. I can't remove, install or move apps. I've rebooted the Mac and the iPhone and nothing helps. The Console window is full of iTunes mesages about "Failed to create replacement string" which I doubt means much with the iPhone. Any suggestions to get iTunes to recognize the apps to make changes?

    I take it back. The problem persists. I've used the same setup as the iPad Air also on IOS 8 and it works fine, but not the iPhone. There is a problem in IOS on the iPhone with iTunes or with iTunes connecting to the iPhone.

  • Itunes won't recognize Iphone 3Gs

    Itunes won't recognize my new iphone3Gs. I've done everything there is to do except upgrade itunes to 8.2 & can't do that because of error-no access to windows installer. Any help would be appreciated.

    What's the operating system?
    What's the exact error message?
    You might be able to download windows installer form the microsoft website and get past that error.

  • ITunes Won't  Recognize iPhone / Crashes

    Since Sept. 28, 2010, I've been unable to sync my iPhone with iTunes on my PC. iTunes exhibits one of the following symptoms: (1) iTunes is very slow to start; recognizes my iPod but not my iPhone; (2) iTunes locks up and crashes after startup; or (3) iTunes won't launch.
    I've called Apple tech support, and removed and reinstalled iTunes, Bonjour, QuickTime, and all apple components 3 times. This has not resolved the problem. QuickTime continues to work fine despite problems with iTunes.
    In the EventViewer there are problems with Bonjour loading on system startup. I've "disabled" Bonjour at system startup, and reinstalled iTunes, but this has not resolved the problem.
    I am not running IOBit's Advanced SystemCare Utility, which has been mentioned as a problem for some on this site. Computer is a Dell Vostro 430 desktop (6 months old), and TrendMicro is my virus software.
    Please help. I want to be able to backup my iPhone again.

    Good gracious. At 8.24 am on 30 September, you launched iTunes and it did a repair install of itself because a file didn't show up when it checked actually-installed files against the records of what should be on your machine in the iTunes installation database. The file in question is the:
    C:\Program Files\iTunes\iTunes.Resources\RatingFont.png
    That usually indicates file or disk damage. And there's been plenty of suggestions of similar sorts of damage in the other error/warning events and attempts to run sfc. So rather than a System Restore, I think we should instead try running a chkdsk over your C drive.
    There's instructions in the following document. Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r, depending on how you choose to go about it. You'll almost certainly need to reschedule the scan to run on restart. This sort of scan of the C drive should take quite a while ... if the scan stops after a few minutes or seconds, something's interfering with the scan.
    [How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
    Does the scan find/repair any damage?
    If so, let's do another complete uninstall/reinstall of iTunes and related software, as per the following document. If Windows doesn't let you delete any files or folder, post back to let us know what the error messages say, and which files/folders you're getting them on. (My concern is that other file damage may have interfered with the replacement of program files during previous attempts at uninstall/reinstalls, which is why the problem has persisted past the previous uninstalls and reinstalls.)
    [Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP|http://support.apple.com/kb/HT1925]
    If everything repairs/uninstalls/deletes/reinstalls successfully, do your iTunes, BonJour, iPhone, etc, start behaving a bit better for you?

  • Windows 7 (32-Bit) - iTunes won't recognize iphone!?

    I have just updated my sony vaio fw41e to windows 7 home premium (32-bit). My chipset is intel pm45.
    I am running itunes 9.0.2 which I believe is the most current. The computer recognizes the iphone and offers me several autoplay options but thats all I get. I no longer get the icon appearing in itunes and I have no idea how to solve it.... I have tried every suggestion from help etc like uninstalling itunes, resetting my phone, restarting my system etc etc...
    Can anyone offer any help?

    http://www.iphonefans.com/troubleshooting-support/690-itunes-wont-recognize-ipho ne.html
    [quote]I have the solution...TRUST ME. I have done all of the restore, reinstall, update drivers...etc...here is the SOLUTION. It seems that when you plug your iPhone in for the first time, your PC automatically installs the iPhone as a "Camera device". This is the problem. All you need to do is point it to the correct driver, which is a USB driver in device manager. Follow these steps, I will bet that it solves all of your recognition issues.
    1. 1. First off you need to have iTunes installed and the ipod touch plugged in
    and recognized as ‘something’ e.g. digital camera (it shouldn’t really
    matter what it’s recognized as, but it needs to be found by windows).
    2. Search for usbaapl in the C:\WINDOWS system folder:
    o open windows explorer (e.g. Right-click Start and then click ‘explore’)
    o right-click the WINDOWS folder and select ‘Search’).
    o type in usbaapl and hit Search – try to ignore the dog!
    You should find the driver info in a sub folder of
    C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7 507DD7B22331826547BDD2D206B
    Remember that location (either leave the search box open or copy the folder
    name into note pad – you’ll need it later)
    If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not
    been installed with the iTunes install and you’ll have to reinstall iTunes.
    3. Locate the ipod-camera device:
    o Open the device manager, e.g. using Start > Control Panel >
    Performance and Maintenance > System > Hardware Tab > Device Manager
    o Look for a device called ‘ipod’ - if your ipod shows up as
    ‘digital camera’ it will be under something like ‘imaging devices’.
    4. Update the driver:
    o Right click the ‘ipod-camera’ in device manager and click on
    ‘Update Driver’ – the Hardware Update Wizard will open.
    o Check the ‘Install from a list or specific location’ then click ‘Next’
    o Check ‘Dont search. I will choose the driver to install' click 'Next'
    Here you should see the Apple Device to update, click "Have Disk"
    In the text box below type (or better copy and paste) or browse the folder
    containing the ipod driver information found in step 1 (in the example
    above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7 507DD7B22331826547BDD2D206B),
    Click "OK"
    DONE!! the driver is now updated and located in the correct USB port [/quote]

  • Updated 2.2.1 - Now iTunes won't recognize iPhone (and iPhone won't work)

    I had this happen last time I did an update too, but that was fixed by going into my control panel and starting my apple mobile device - I checked and this time all is running. I can't use my iPhone and iTunes won't show it's connected even though it is (so can't restore, etc. since it won't recognize the device). I've tried closing out of iTunes and re-connecting the phone - nothing. I'm on PC using 2003 Microsoft software.
    Thanks for any insight.

    Sorry, gave the wrong PC info. I'm on XP Professional, version 2002, service pack 3.
    Please help!

  • Itunes won't recognize IPhone

    The iPhone is recognized by the USB and the device manager but it won't show up in iTunes. I have uninstalled and re-installed itunes and quicktime multiple times, rebooted, logged on as a different user..seriously, I have tried everything - including spending 3 hours on the phone with Apple support.
    Is anyone going through this? Any ideas?
    Thanks!
    PC user soon switching to a MAC!!

    Sounds like you have a bug, you have to delete this special icon in your HD... I cant remember the name of it, but anyway Apple will tell you for free, do that & deleted Itunes, no need to delete Q.T. because it will be included with your new download. Once all this is done it should work.

Maybe you are looking for

  • Transfer whole schema between databases

    Hi, I have a question on how to move an entire schema between two databases which are of the same version and patchset. I identified the possible methods as follows: 1) Using exp/imp or expdp/impdp, but that's quite slow on larger schemas and the tra

  • How to disable one check box when another is checked

    Hi, I'm a first time user. i am trying to make text fields appar and dissapaer when check boxes are ticked. but only alow one check box to be active at one time.  I am making a simple form in Acrobat pro 9, I have two check boxes Checkbox1 & Checkbox

  • How to Get the Source File Path in the Receiver Side

    Hi Experts, Here We are Trying to Do How to Get the Sender Information ( File Name & Path ) on the Receiver Side . According to the Michal Blog /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp

  • Printing Invoices in Background Jobs

    Hello, We have an o/p type that is processed each time a billing document is created. The o/p type prints the billing document as soon as it is saved. When we have a billing due list program run in background the printouts are waiting in the Spool an

  • Escape XML Webservice

    Hi All, I´m consuming a web service service but I´m trouble about some strange characters. Below there is a little peace of the return. The information below is returned in a String field <FATURA_PDF TIPO_FATURA="S"> The problem is this "<" sequence