ITunes won't run - invisible window where iTunes should be, but it never launches.

I'm running Windows Vista 32 (I know, I should upgrade) and over the last few weeks, I noticed that my podcast wasn't downloading new eps.   Now, iTunes won't run at all.
I've done a full scan of the PC and there are no viruses found.   I'm using Kaspersky.
I've un-installed all Apple apps and rebooted before trying to reload iTunes and it never runs.
Anyone have any idea what might be preventing iTunes from running?
I have a Windows 7 PC on the other desk, connected through the same switch and Cable Modem and iTunes is running fine on it, so it's not network / internet related, as far as I can tell.
Thank you,
J

"The feature that you are trying to use is on a network resource that is unavailable. Click OK to try again or enter an alternate path to another folder containing the installation package iTunes.msi in the box below"
Let's just run through the standard procedures for that one again, just to be sure.
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the Windows Installer CleanUp utility. Then use it to clear any existing itunes and/or QuickTime installation configuration information from the PC. (Launch CleanUp, find any iTunes and/or QuickTime entries in the list of programs in CleanUp, and remove those entries.)
Description of the Windows Installer CleanUp Utility
next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
Removing iTunes and QuickTime for Windows
now try another itunes install. does it go through properly this time?
(If any step of this procedure failed to work, explain to us as best you can what the problem was.)

Similar Messages

  • Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

    itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
    I'm on a Dell PC running Vista Home Premium.
    HELP!!!!!!!!!!!!!!!!!!!

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • My iTunes won't open on Windows XP. iTunes.exe - Entry point not found, Error 7 (Windows Error 127)

    When I open iTunes, I get a message saying under iTunes.exe - Entry Point Not Found, it says, The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. And I'm not talking about the AppleSyncNotifier.exe. Along with that, I get the message saying, "iTunes was not installed correctly. Please reinstall i Tunes." Error 7 (Windows Error 127). That's why I'm unable to open iTunes. I sure hope to see a solution to those problems soon.
    I know I've mentioned this before, but I've now given a little more info to make my explanation more clear.

    Try this one from Article TS3074
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074

  • ITunes won't run on Windows 7: Quicktime not found. .. But Quicktime works!

    Installed latest version of iTunes 10 on a Windows 7 64-bit PC. Occasionally iTunes runs, but usually it gives the error: "Quicktime was not found. Quicktime is required to run iTunes. Please uninstall iTunes, then install iTunes again".
    I have done this about 3 times, making sure to uninstall everything apple (itunes, quicktime, bonjour, etc.) Once I even followed a recommendation to delete all application data and reinstall. Rebooting, etc.
    Quicktime runs absolutely fine.
    I even tried repairing quicktime, installing quicktime by itself after iTunes was installed. No luck. Any ideas???

    I've downloaded the iTunes installation file and tried to install or repair 3 times but keep getting a message that a required component is not installed (-45075).
    Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • With Windows 7 Home Premium, whenever I start iTunes, I get a message that colors have been reverted to Windows Basic because iTunes won't support my Windows Aero configuration.  Is there a fix for the incompatibility?

    With Windows 7 Home Premium, whenever I start iTunes, I get a message that colors have been reverted to Windows Basic because iTunes won't support my Windows Aero configuration.  Is there a fix for the incompatibility?  I don't mind the color changes, but I'm having an external speaker problem that could be related to the incompatibility (at random times--usually several hours after start-up, my external speakers--connected via my Samsung Central Station's wireless docking station and computer-installed dongle--shut off and won't play until I restart.  I've investigated other options, but iTunes may be the problem.)  Thanks.

    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • I have Mac0s x10.4.11 with itune 9, I have purchased apple tv and it won't run because i need itunes 10.2 can anyone suggest a solution

    I have Mac0s x10.4.11 with itune 9, I have purchased apple tv and it won't run because i need itunes 10.2 can anyone suggest a solution

    Upgrade to Leopard.  Better yet, Snow Leopard if your Mac is an Intel model (you don't say much about the computer which makes this hard to make suggestions).

  • Itunes won't run after download

    itunes won't run after download. simply asks to acknowledge agreement which I did. help

    You appear to be able to backup your contacts without iTunes.  Google "backup iphone contacts without itunes".
    The way to avoid having to get a tech person in is to get past the idea that your problem (which you still haven't defined) is "beyond my ability to fix".  ;-)

  • TS1717 iTunes won't open on Windows 7

    iTunes won't open on Windows 7.
    Error message says MSVCR80.dll is missing.
    Re-installing iTunes over the top didn't work, it couldn't get passsed a mobile devices error. Any thoughts anyone?

    Howdy rtih,
    It sounds like you are unable to open iTunes after a recent update. I suggest the troubleshooting steps from the article named:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • HT204048 Is there any way at all to install Windows 7 32 bit onto a MacBook Pro 13 in Retina Late 2013?  The windows software I need won't run on Windows 7 64 bit.

    Is there any way at all to install Windows 7 32 bit onto a MacBook Pro 13 in Retina Late 2013? The windows software I need won't run on Windows 7 64 bit.

    Not using Boot Camp, but you should be able to using virtualization software such as Parallels to run Windows concurrently with OS X.

  • After downloading iphone pictures to desktop, itunes won't open.  I downloaded itunes 10.6 (64bit) but get "Do you want the following program to make changes to your computer?" Apple Inc.  I've clicked "yes", restarted the computer, and still no luck.

    after downloading iphone pictures to desktop, itunes won't open.  I downloaded itunes 10.6 (64bit) but get "Do you want the following program to make changes to your computer?" Apple Inc.  I've clicked "yes", restarted the computer, and still no luck.

    I also have the same problem, but the Software Updates tool doesn't recognise that Quicktime is out of date. Have you tried downloading Quicktime 7.7 Leopard from http://support.apple.com/downloads/#quicktime as this worked for me...?

  • ITunes error: Please wait while windows configures iTunes

    Hello, since I changed my Win XP account to limited, I can't start my iTunes without getting the following error message:
    iTunes error: Please wait while windows configures iTunes
    It gathers information and then prompts me to restart. If I restart, it does it all over again.
    If I give the account administrative access, it works just fine, but when I downgrade to limited again the problem starts all over again. I've give full access to the iTunes folder in Program files.
    Any thoughts?

    See if it will start without configuring everything directly from the itunes.exe in the limited account.
    C:/Program Files/iTunes
    Sometimes a shortcut problem can cause that, although I haven't heard of it being associated with a limited account.

  • Hi, I have adobe acrobat 6.0 but it won't run on windows 7, is there an update availabe?

    Hi, I have adobe acrobat 6.0 but it won't run on windows 7, is there an update availabe?

    I agree with Doc, but there may be a work around. Actually, your best solution is to just buy AA XI. The work around depends on what you mean by does not work. Do Acrobat and Distiller both install and appear to function? Is the problem one of not being able to print? If both of these answers are yes, then you can install an independent PS printer (maybe one from Adobe or one of the HP color PS printers), change the name to Adobe PDF for your use (not required), and change the port to FILE. Then to create a PDF you would print to that printer and open the file created in Distiller to create a PDF file. May or may not work. However, AA6 is so old, it is likely to cause other problems, even if this process works. If nothing else, it will not open some of the newer PDFs that are being created today (at least I would guess that will be the case). So buying XI is really in order.
    Other issues that may crop up will be activation (will likely fail) and updates that have to be obtained from the FTP site and not the web.

  • Itunes won't recognize new credit in Itunes

    itunes won't recognize new credit in itunes store and goes straight to billing page so I cannot purchase anything; also play button won't activate when in itunes stor. Susanne

    Hi Chris
    Thank you for your help sorry it has taken me so long to reply to you.
    I solved my problem with Itunes gift card after many frustrating hours. I went to purchase another song it did the same thing as before (went straight to the billing page) but this time I hit a credit card icon it asked me to bring up details; I deliberately entered wrong numbers so forth and so on. I deleted all the credit card details and hit NONE and I found I could then exit the page. That action seemed to trigger a correction for purchase; and I could then download without too much trouble.
    Cheers
    Susanne A

  • HP Utility won't run in Windows 7

    The HP Utility application for an HP Designjet Z3200 won't run in Windows 7. I browse to the application and nothing happens when I try to open it. I've rebotted several times as well as uninstalled and reinstalled the latest version of the app downloaded from HP.
    Anyone have any clues as to why this is happening?
    Tony

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Designjet forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Flash Player won't  run. Windows 7, IE9, Firefox 16.01

    Flash Player won't  run. Windows 7, IE9, Firefox 16.01. I use the flash player uninstaller, make sure there are no flash player sub-folders reinstall current version, says installed .. no "video" no box, no info. redone several times both in Firefox and IE

    Did you install both the ActiveX (for Internet Explorer) and plugin (for Firefox)?  And both browsers show the same problem?
    On Internet Explorer
    is Shockwave Flash object enabled (http://forums.adobe.com/thread/885448)?
    is ActiveX Filtering disabled (http://forums.adobe.com/thread/867968)?

Maybe you are looking for

  • OWB Release 10.2.0.1.0 instalation on  Oracle Release 9.2.0.1.0

    Hi All, When i try to create OWB repository with Repository assistant i get the following error : ORA-22905 cannot access rows from a non nested table iteam ORA-06512 at line 17. My environment details are as given below. O/S : Windows 2000 Oracle: R

  • Event won't let drop Node, Manual Node won't let drop Event

    Hi, I am using OEM 9.2. I tried to register an event but the target was manually defined, so it went to pending state. I tried to drop the node to rediscover it, but the pending event won't let me. So the event won't let me drop the node and the node

  • GetVersionCollection - passing multiple fields

    Hi, Is it possible to use multiple fields in the "GetVersionCollection"? I have currently the code as : FetchListVersion.Lists listsservice = new FetchListVersion.Lists(); listsservice.UseDefaultCredentials = true; XmlNode ndVersionsRecID = listsserv

  • How to make Hierarkchy variable in BW 3.5?

    Dear collegues, I have five profit center hierarchies that I want to create identical reports on. The user should be able to first choose which hierarchy he wants to see, and then the node of the chosen hierarchy. Is this possible? Can anyone explain

  • Ld.so.1: java: fatal: relocation error: file :referenced symbol not found

    Hello, I am trying to run my application (using Java) on windows which in turn calls the Remote Manager on Solaris(Solaris 9 on SPARC Processor). It gives the following linker error: ApiInitLocal():ApiInitLocal: START ApiInitLocal():* * * A P I I N I