ITunes won't see Airtunes Speakers

My iTunes 6.0.1 no longer sees the speakers connected to my Airport Express.
I have both a Mac and a PC, and the Mac can see the speakers, but the PC can't!
The PC is running Windows XP Professional with Bonjour networking installed.
Can anyone help?
Thanks.

Had same problem and went through an hour-long diagnostic with Apple support, reinstalled all software etc. After sitting and thinking about it, I removed the security from my wirelessrouter, made sure all wireless devices had the same WEP key and then restarted WEP security on the router. Instant fix and praobably didn't need all the wasted time on re-installs !!
Geoff

Similar Messages

ITunes won't see iPhone but sees it in iPhoto

iTunes won't see iPhone but sees it in iPhoto. The iTunes doesn't show a "Devices" title in the side window. Any information on how to fix this problem. Would like to start using iCal and sync the iPhone 4s using iTunes (etc.)

This may not be helpful but you are not the only one.
https://discussions.apple.com/message/16779597#16779597
https://discussions.apple.com/message/16779593#16779593

PC can't see Airtunes Speakers, While Mac Can

Hello,
My Windows XP Professional PC is connected to the same wireless network as my PowerBook G4, with an Airport Express set to join the wireless network to share printer and play iTunes music.
The Mac can print and see the Airtunes speakers in iTunes fine, but the Windows machine can print, see iTunes shared music, but not see the Airtunes speakers!
My "look for Airtunes speakers" option is turned on, I've reset the Airport Express several times, uninstalled and reinstalled iTunes, and am now at a loss.
Anyone willing/able to help?
Thanks.

Make sure the firewall built into Windows XP is turned off, make sure any firewall or "internet protection" software you installed on the PC is disabled or uninstalled, and make sure any VPN client software installed on this Mac doesn't also have a built in firewall enabled.

Itunes can't see remote speakers on extended network

i have a peculiar issue that hopefully someone else has come up against: my itunes does not see any remote speakers that are attached to the network via a network extender.
my setup has 3 remote speakers: one immediately next to a d-link router and two that connect via a d-link range extender - all of the speakers are wirelessly connected to their respective devices. when my laptop is near the router (and therefore connecting to that device) itunes can only see the one speaker that is near the router but not the other two. when my laptop is next to the range extender (and therefore connecting via the extender) itunes can only see the two speakers that are connecting through the extender, but not the one connecting via the router.
weird, eh? any thoughts as to how to see all three speakers at once on my itunes?
thanks,
Chris
Windows XP

Same thing happened here on a G5 after i had troubles installing the latest quicktime upgrade vover the last weekend. I have however got this powerbook with leopard and itunes and it works exactly as it could. I have two airport expresses on two hifi's the main one which provides wifi is missing i can get the slave one that bridges the network as wel las serving music to show if i restart it .. but it seems to wither and die from the itunes window without warning
It must be a machine specific thing however, as i have created new logins on the faulty machine and none of them can give me sessions with itunes where remote speakers are restored so the problem must lie closer to root than with user settings.
I am hoping its a stinking flaw with quicktime or itunes as i do not fancy having to restore leopard again after all the nonsense of the first one. I wasted enough time then and i'd like a peaceful christmas listening to my music on my hifi.. the current situation is as perverse as drm

ITunes won't see all Aperture photos

I have a rather large Aperture photo library (30,000 photos), and I like to view various groups of photos on my iPod Touch and also on my Apple TV. In both cases, however, iTunes won't let me choose all of the available projects and albums. In some instances, it will recognize the album but won't see any photos. In this particular scenario, the album has about 1500 photos of jpeg and Canon Raw types. Is this a known problem or am I configuring Aperture albums incorrectly for iTunes compatibility?
I have Aperture 2.0.1, Leopard and iTunes 7.6.1. The iPod Touch is at 1.1.4 and Apple TV is running 2.0 of the OS.
Any help would be greatly appreciated!
Greg

Somewhat similar issue here. No new photos are being added to the iPhone via iTunes sync and iTunes does not seem to update itself with the Aperture library at all. I have photos in the "Last Week" smart album in Aperture (empty) while the iPhone displays 57 photos that are now pushing a month old.
The problem is exactly the same with the sync to Apple TV, so I figure the common link (iTunes) is likely the culprit -- though I guess it's possible that Aperture is not sharing the info with iTunes.
The problem seemed to have appeared with iTunes 7.6 and persists with 7.7.1. and with the most-recent Aperture update.
I completely trashed the .plist files for iTunes a week or so ago to no avail.

Retrieved old app from Time Machine, but iTunes won't see it

I'm running 10.6.1. iTunes 9, iPhone 3.1. I'm trying to revert to an older version of an app. I retrieved the older app from Time Machine and I can see it in Finder in my iTunes/Mobile Applications folder. iTunes doesn't see it though. Is there a way to make iTunes see it?

I just discovered that I have to import the reverted app's file into my iTunes Library (File -> Add To Library). Nevermind.

ITunes won't see the iPhone

I just purchased a MAcbook Pro, running Leopard 10.5, and iTunes 8.02. I already have an iPhone 3G, running OS 2.2. Everything worked fine when I sync'd it with my PC. Now that I have a Mac, I'd like to sync it with this, but iTunes won't acknowledge that the iPhone exists - or at least that it is connected to the Mac. I have tried both USB ports, and the result is the same. I have used the USB ports for other things, like connecting jump drives, and they seem to work.
I have tried restarting the iPhone, no change.
Any suggestions?

Check System Preferences > Accounts, click your username then the Login Items tab - is iTunesHelper present? If not, that's the problem. Download iTunes from the link below and run the installer (no need to delete anything first).
http://www.apple.com/itunes/download/
If not, then you may need to remove and reinstall AMDS:
http://support.apple.com/kb/HT1747

2 macs, one sees Express in Itunes and one won't see remote speakers

I have a mac mini connected to D-Link router via ethernet and it always sees my remote speakers in Itunes. So I know my airport express hase successfully joined my network. But my Ibook rarely sees the remote speakers in itunes. Sometimes it will if I have itunes running on my mini. I always have a green light and the mini always sees the speakers. But the ibook only intermittenly sees it. Any help? my versions of itunes are updated with every new update and are current as of 1 August 2006

Had same problem and went through an hour-long diagnostic with Apple support, reinstalled all software etc. After sitting and thinking about it, I removed the security from my wirelessrouter, made sure all wireless devices had the same WEP key and then restarted WEP security on the router. Instant fix and praobably didn't need all the wasted time on re-installs !!
Geoff

Itunes can't see remote speakers

I have an airport express joined to an airport extreme base station network. The airport express's sole function is to attach the stereo. One of my computers that was running 10.4 was controlling the remote speakers --- unfortunately that computer crashed - and i have another computer running 10.3.9 that I wanted to control the stereo with. Even though it is joined to the same network for the internet, it does not see the remote speakers.
Any help would be appreciated.
Thanks,
Rob

Same thing happened here on a G5 after i had troubles installing the latest quicktime upgrade vover the last weekend. I have however got this powerbook with leopard and itunes and it works exactly as it could. I have two airport expresses on two hifi's the main one which provides wifi is missing i can get the slave one that bridges the network as wel las serving music to show if i restart it .. but it seems to wither and die from the itunes window without warning
It must be a machine specific thing however, as i have created new logins on the faulty machine and none of them can give me sessions with itunes where remote speakers are restored so the problem must lie closer to root than with user settings.
I am hoping its a stinking flaw with quicktime or itunes as i do not fancy having to restore leopard again after all the nonsense of the first one. I wasted enough time then and i'd like a peaceful christmas listening to my music on my hifi.. the current situation is as perverse as drm

ITunes won't see/play music on iPhone

Folks: Tried searching the discussions database before posting this but maybe I'M the only idiot facing this problem...
My iPod crashed, so in the meantime I figured I'd use my iPhone. Hooked it to my computer, recongized it fine, Music, audiobooks seemed to transfer to my iPhone fine (I can see them AND play them through tghe iPhone from my computer in iTunes) BUT -
Anytime I go to my iPhone on its own - disconnected from my computer - and launch iTunes, all I get is Store information. I cannot seem to locate ANYTHING I transferred (and I KNOW is on the phone) using iTunes. If I go to "More" as a control and try to launch "Configure" everything is blacked out and I cannot reconfigure anything. It seems like iTunes on my iPhone won't recognize anything I transferred.
Suggestions? Thanks.
Tom
[email protected]

Well, sirprise. Apparently iPhones don't use iTunes to play audio. There's an app called just "Music" that acts like an iTunes app...

ITunes won't see my cd burner

I have iTunes 7.2 running on my Mac G4 with OSX 10.39. (I can't upgrade the OS because my version of ProTools software(6.41) is not supported on anything above 10.39) and my ProTools hardware "Mix plus" won't run on anything above 10.39.
I have Toast 6 and it works just great with my Pioneer DVR-110 DVD burner. I use them together daily.
But when I try to burn a CD with itunes it reports back that "no cd burner or burning software is found."
How can I get around this and get itunes to see my pioneer burner?

Here's my diagnostics:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCV-RZ22G(UC)
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PXHELP20 (2.0.0.0), AFS2K (3.1.21.0),
UpperFilters: ࢸ"� ᆌ0ŘNT AUTHORITY\SYSTEMɀŞ쓠睎঻谘睠谘睠범 Ф
Video Driver: RADEON 9600 SERIES\RADEON 9600 SERIES
IDE\DiskMaxtor6Y160L0_________________________YAR41VW0, Bus Type ATA, Bus Address [0,0]
MEMSTPCI\Disk, Bus Type UNKNOWN
IDE\CdRomSAMSUNGCD-ROM_SC-140C__________________A101___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomSONYDVD_RW_DW-U12A_____________________2.0a___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Thanks very much Toonz.

ITunes won't see Apple TV

So I have my Apple TV 3 and iTunes on windows open. I want to AirPlay to stream my music and movies to the TV, but there is no AirPlay icon anyhwere. Where is it and how can I AirPlay to the TV?

Well lucky for you....
I've tried everything and iTunes just will not see my ATV.... Everything was working fine until the first time I downloaded a movie from iTunes and whilst watching a movie...
ATV locked up and I've gone through every possible combination of recommended fixes with absolutely zilch results.... iTunes just does not see ATV.
However.... ATV sees the internet and I can play radio, film previews etc.... but just can not get to iTunes any longer.
Would appreciate any guidance before the ATV finds itself winging it's way out the window....
Ta

ITunes won't see iPhoto libraries

I have iTunes 10 and iPhoto 8 (7.1.5). i want sync my iPod Touch with one of my iPhoto libraries, but it will not see the library that is open in iPhoto. How do i force iTunes to see the iPhoto library.

Did you reinstall iTunes and Apple Mobile Device Service? http://support.apple.com/kb/HT1747
Try to connect your phone in recovery mode: http://support.apple.com/kb/HT1808

ITunes won't see my iPod, syncing

Hey, I just upgraded from Tiger to Snow Leopard and my iTunes will no longer see my iPod when I plug it in via my USB. I know the USB port works fine (everything else plugged in there always works). If I re-install iTunes it will usually see my iPod but I really don't want to keep re-installing iTunes just to sync my iPod with my music.
Any ideas?

HI and welcome......
Mac OS X (10.6.3)
If you forum profile is correct, update the Mac OS X to v10.6.5. If you didn't repair permissions after upgrading to v10.6, you should do that.
Click your Apple menu / Software Update...
Then repair disk permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac. If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US 
Carolyn

ITunes won't see my 2nd App screen unless I sync

Running iTunes 9.0.0.25
My iTouch has software version 3.1.2 running.
Hook my iTouch up with iTunes running. Recognized it. Click on Applications tab. It will only show the first screen of my iTouch until I click on Sync.
I want to sync 3 apps to my iTouch and put them on my 2nd screen which I already have apps. When I put the check for Sync Applications, the 2nd screen drops off and the apps are forced onto the first screen. How do I get iTunes to recognize the 2nd screen so I can put apps on it?
My workaround has been to download the apps straight from the iTouch but I'd rather not do that unless I have to.

You should see your additional screens on the right the depiction of your home screen. Just drag the apps listed on the left to the screen you want them on. Make sure you click Sync to save them.

ITunes won't see Airtunes Speakers

Similar Messages

Maybe you are looking for