ITunes won't see my cd burner

I have iTunes 7.2 running on my Mac G4 with OSX 10.39. (I can't upgrade the OS because my version of ProTools software(6.41) is not supported on anything above 10.39) and my ProTools hardware "Mix plus" won't run on anything above 10.39.
I have Toast 6 and it works just great with my Pioneer DVR-110 DVD burner. I use them together daily.
But when I try to burn a CD with itunes it reports back that "no cd burner or burning software is found."
How can I get around this and get itunes to see my pioneer burner?

Here's my diagnostics:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCV-RZ22G(UC)
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PXHELP20 (2.0.0.0), AFS2K (3.1.21.0),
UpperFilters: ࢸ"� ᆌ0ŘNT AUTHORITY\SYSTEMɀŞ쓠睎঻谘睠谘睠범 Ф
Video Driver: RADEON 9600 SERIES\RADEON 9600 SERIES
IDE\DiskMaxtor6Y160L0_________________________YAR41VW0, Bus Type ATA, Bus Address [0,0]
MEMSTPCI\Disk, Bus Type UNKNOWN
IDE\CdRomSAMSUNGCD-ROM_SC-140C__________________A101___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomSONYDVD_RW_DW-U12A_____________________2.0a___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Thanks very much Toonz.

Similar Messages

  • ITunes won't see iPhone but sees it in iPhoto

    iTunes won't see iPhone but sees it in iPhoto. The iTunes doesn't show a "Devices" title in the side window. Any information on how to fix this problem. Would like to start using iCal and sync the iPhone 4s using iTunes (etc.)

    This may not be helpful but you are not the only one.
    https://discussions.apple.com/message/16779597#16779597
    https://discussions.apple.com/message/16779593#16779593

  • ITunes won't see all Aperture photos

    I have a rather large Aperture photo library (30,000 photos), and I like to view various groups of photos on my iPod Touch and also on my Apple TV. In both cases, however, iTunes won't let me choose all of the available projects and albums. In some instances, it will recognize the album but won't see any photos. In this particular scenario, the album has about 1500 photos of jpeg and Canon Raw types. Is this a known problem or am I configuring Aperture albums incorrectly for iTunes compatibility?
    I have Aperture 2.0.1, Leopard and iTunes 7.6.1. The iPod Touch is at 1.1.4 and Apple TV is running 2.0 of the OS.
    Any help would be greatly appreciated!
    Greg

    Somewhat similar issue here. No new photos are being added to the iPhone via iTunes sync and iTunes does not seem to update itself with the Aperture library at all. I have photos in the "Last Week" smart album in Aperture (empty) while the iPhone displays 57 photos that are now pushing a month old.
    The problem is exactly the same with the sync to Apple TV, so I figure the common link (iTunes) is likely the culprit -- though I guess it's possible that Aperture is not sharing the info with iTunes.
    The problem seemed to have appeared with iTunes 7.6 and persists with 7.7.1. and with the most-recent Aperture update.
    I completely trashed the .plist files for iTunes a week or so ago to no avail.

  • Retrieved old app from Time Machine, but iTunes won't see it

    I'm running 10.6.1. iTunes 9, iPhone 3.1. I'm trying to revert to an older version of an app. I retrieved the older app from Time Machine and I can see it in Finder in my iTunes/Mobile Applications folder. iTunes doesn't see it though. Is there a way to make iTunes see it?

    I just discovered that I have to import the reverted app's file into my iTunes Library (File -> Add To Library). Nevermind.

  • ITunes won't see the iPhone

    I just purchased a MAcbook Pro, running Leopard 10.5, and iTunes 8.02. I already have an iPhone 3G, running OS 2.2. Everything worked fine when I sync'd it with my PC. Now that I have a Mac, I'd like to sync it with this, but iTunes won't acknowledge that the iPhone exists - or at least that it is connected to the Mac. I have tried both USB ports, and the result is the same. I have used the USB ports for other things, like connecting jump drives, and they seem to work.
    I have tried restarting the iPhone, no change.
    Any suggestions?

    Check System Preferences > Accounts, click your username then the Login Items tab - is iTunesHelper present? If not, that's the problem. Download iTunes from the link below and run the installer (no need to delete anything first).
    http://www.apple.com/itunes/download/
    If not, then you may need to remove and reinstall AMDS:
    http://support.apple.com/kb/HT1747

  • Disc drive fails and iTunes won't recognize CD after burning

    Hi all,
    I'm having a strange issue with iTunes on my work computer, a Dell Optiplex GX280 with Windows XP installed, iTunes version 8.2.1.6.
    About half of the time when I burn an audio CD, iTunes (or perhaps my computer) seems to have a problem with the final burn step. It goes through the whole process just fine, but after the countdown hits 0:00, I don't hear the 'your CD is finished' chime from iTunes, nor does the disc appear on the lefthand menu. The CD drive also doesn't respond at this point - the drive won't eject via iTunes or by me pressing the button (it will hard-eject with a paperclip-in-the-hole trick, but still doesn't respond after that). The only way I can get the disc to eject is by restarting the computer, at which point it will eject. After a restart, the AutoPlay will identify the burned CD as a blank disc, but if I try to re-burn it in iTunes, it gives me the error message "This is not a blank CD." (and of course the burn wasn't successful - it won't play in a stereo or in the computer). I'm wasting a lot of CD-Rs this way! :-/
    I'm stumped. It seems to me that something in that final step of the burn process is causing the CD drive to fail, but I'm not sure what I can do fix the problem. Could it be the brand of disc I'm using, or something with the actual disc drive? Any help would be very much appreciated!

    Okay, apologies for the duplicate thread - I tried searching and didn't see anyone with a similar issue, but now I see a thread down the page with the same issue of the disc not ejecting. I'll try WMP and see if that works any better...

  • ITunes won't hold Preferences Advanced Burning CD setting

    I have kept ITunes updated. For the first time in a couple of months I tried to burn an audio CD from songs in my library. That always worked before but won't now. I have a Macbook Pro with the same latest Itunes version and found it doesn't have the problem. I figured something was corrupt in the PC installed version and so completely uninstalled and reinstalled 7.7.1.11 That didn't help. I can set the preference for audio CD but it always gets changed to MP3.
    Can anyone comment or suggest a fix?

    The headers on the problem tracks may be nonstandard or corrupted (this can happen with some MP3 conversion or import utilities). If you search the web for "mp3 repair" you'll find a number of repair tools. Here's one I've seen mentioned:
    VBRfix.
    I haven't tried any of the versions of this, so I can't attest to how well (or indeed if) they work.
    Hope this helps.

  • ITunes won't see/play music on iPhone

    Folks: Tried searching the discussions database before posting this but maybe I'M the only idiot facing this problem...
    My iPod crashed, so in the meantime I figured I'd use my iPhone. Hooked it to my computer, recongized it fine, Music, audiobooks seemed to transfer to my iPhone fine (I can see them AND play them through tghe iPhone from my computer in iTunes) BUT -
    Anytime I go to my iPhone on its own - disconnected from my computer - and launch iTunes, all I get is Store information. I cannot seem to locate ANYTHING I transferred (and I KNOW is on the phone) using iTunes. If I go to "More" as a control and try to launch "Configure" everything is blacked out and I cannot reconfigure anything. It seems like iTunes on my iPhone won't recognize anything I transferred.
    Suggestions? Thanks.
    Tom
    [email protected]

    Well, sirprise. Apparently iPhones don't use iTunes to play audio. There's an app called just "Music" that acts like an iTunes app...

  • ITunes won't recognize my CD burner, error message -43 on CD diagnostics

    I hope there is someone who can help me. I am at my wits end with this! I cannot burn any cd's using iTunes--it does not recognize that I have burning capablities. I have tried repairing and reinstalling iTunes, because the very first error message I get when opening iTunes reads like this "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes". I have done this about 20 times already. Then when I try to run CD diagnostic, this is what I get:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Sony Corporation PCV-RZ22G(UC)
    iTunes 6.0.1.3
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PXHELP20 (2.0.0.0), AFS2K (3.1.21.0),
    UpperFilters: ⿨#Ǚ
    Video Driver: RADEON 9600 SERIES\RADEON 9600 SERIES
    IDE\DiskMaxtor6Y160L0_________________________YAR41VW0, Bus Type ATA, Bus Address [0,0]
    MEMSTPCI\Disk, Bus Type UNKNOWN
    USBSTOR\DiskApple__iPod____________1.62IDECdRomSAMSUNG_CD-ROM_SC-140C__________________A101___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomSONYDVD_RW_DW-U12A_____________________2.0a___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
    I am really unhappy with this problem, considering that I can use Windows Media Player with no problem whatsoever. Now I have purchased all kinds of music off of iTunes and can't even burn a CD--what a waste of money. I hope someone has a suggestion for me. When I tried to email to the iTunes support they told me they didn't handle this type of problem, and I'd have to call their technical help line and pay whatever fee they charge for calls. Please help! Or else I guess my husband wasted $400 on a video iPod that's worthless.

    Here's my diagnostics:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Sony Corporation PCV-RZ22G(UC)
    iTunes 6.0.1.3
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PXHELP20 (2.0.0.0), AFS2K (3.1.21.0),
    UpperFilters: ࢸ"� ᆌ0ŘNT AUTHORITY\SYSTEMɀŞ쓠睎঻谘睠谘睠범 Ф
    Video Driver: RADEON 9600 SERIES\RADEON 9600 SERIES
    IDE\DiskMaxtor6Y160L0_________________________YAR41VW0, Bus Type ATA, Bus Address [0,0]
    MEMSTPCI\Disk, Bus Type UNKNOWN
    IDE\CdRomSAMSUNGCD-ROM_SC-140C__________________A101___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomSONYDVD_RW_DW-U12A_____________________2.0a___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
    Thanks very much Toonz.

  • ITunes won't see Apple TV

    So I have my Apple TV 3 and iTunes on windows open.  I want to AirPlay to stream my music and movies to the TV, but there is no AirPlay icon anyhwere.  Where is it and how can I AirPlay to the TV?

    Well lucky for you....
    I've tried everything and iTunes just will not see my ATV.... Everything was working fine until the first time I downloaded a movie from iTunes and whilst watching a movie...
    ATV locked up and I've gone through every possible combination of recommended fixes with absolutely zilch results.... iTunes just does not see ATV.
    However.... ATV sees the internet and I can play radio, film previews etc.... but just can not get to iTunes any longer.
    Would appreciate any guidance before the ATV finds itself winging it's way out the window....
    Ta

  • ITunes won't see iPhoto libraries

    I have iTunes 10 and iPhoto 8 (7.1.5). i want sync my iPod Touch with one of my iPhoto libraries, but it will not see the library that is open in iPhoto. How do i force iTunes to see the iPhoto library.

    Did you reinstall iTunes and Apple Mobile Device Service? http://support.apple.com/kb/HT1747
    Try to connect your phone in recovery mode: http://support.apple.com/kb/HT1808

  • ITunes won't see Airtunes Speakers

    My iTunes 6.0.1 no longer sees the speakers connected to my Airport Express.
    I have both a Mac and a PC, and the Mac can see the speakers, but the PC can't!
    The PC is running Windows XP Professional with Bonjour networking installed.
    Can anyone help?
    Thanks.

    Had same problem and went through an hour-long diagnostic with Apple support, reinstalled all software etc. After sitting and thinking about it, I removed the security from my wirelessrouter, made sure all wireless devices had the same WEP key and then restarted WEP security on the router. Instant fix and praobably didn't need all the wasted time on re-installs !!
    Geoff

  • ITunes won't see my iPod, syncing

    Hey, I just upgraded from Tiger to Snow Leopard and my iTunes will no longer see my iPod when I plug it in via my USB. I know the USB port works fine (everything else plugged in there always works). If I re-install iTunes it will usually see my iPod but I really don't want to keep re-installing iTunes just to sync my iPod with my music.
    Any ideas?

    HI and welcome......
    Mac OS X (10.6.3)
    If you forum profile is correct, update the Mac OS X to v10.6.5. If you didn't repair permissions after upgrading to v10.6, you should do that.
    Click your Apple menu / Software Update...
    Then repair disk permissions.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac. If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US

    Carolyn

  • ITunes won't see my 2nd App screen unless I sync

    Running iTunes 9.0.0.25
    My iTouch has software version 3.1.2 running.
    Hook my iTouch up with iTunes running. Recognized it. Click on Applications tab. It will only show the first screen of my iTouch until I click on Sync.
    I want to sync 3 apps to my iTouch and put them on my 2nd screen which I already have apps. When I put the check for Sync Applications, the 2nd screen drops off and the apps are forced onto the first screen. How do I get iTunes to recognize the 2nd screen so I can put apps on it?
    My workaround has been to download the apps straight from the iTouch but I'd rather not do that unless I have to.

    You should see your additional screens on the right the depiction of your home screen. Just drag the apps listed on the left to the screen you want them on. Make sure you click Sync to save them.

  • Old CD Burner Broke but iTunes won't recognize new external Burner

    HELP!
    My internal CD Burner (E-drive) broke and I installed a new external burner (F-drive). However, when I go to burn a CD, iTunes wants to burn to the old, broken internal drive.
    I checked Preferences, Burning but the ONLY drive listed is the old broken "E" drive - there is no list of drives to choose from (it is greyed out and I can't choose or point to the new "F" drive).
    Any thoughts?
    Thanks
    Diane

    hmmmm. okay, let's try something relatively simple first ... a "reboot and repair".
    reboot the PC. (very important.) now do a repair install of iTunes. in Add/Remove programs, select iTunes, click "Change" and then click "Repair".
    if the repair install goes through okay, does the F show up in your Burning preferences?

Maybe you are looking for