ITunes won't start after installation, get error "iTunes has encountered.."

I've been reading up on this a bit in the forums, but I can't seem to find a definitive answer to fix this problem. Just today, I tried to install iTunes to my month-old computer. Installation seemed to go fine. However, now when I click on "iTunes" my computer goes immediately to:
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
I tried the MSConfig thing and that didn't do anything. I tried uninstalling and reinstalling and that didn't work, either.
What I find weird is that after uninstalling, I try to install QuickTime all by itself, and the computer informs me there is already a version installed, but I never did and it does not show up under "control pannel, add or remove programs."
If this helps, I copied this from the windows error:
AppName: itunes.exe AppVer: 7.0.2.16 ModName: unknown
ModVer: 0.0.0.0 Offset: 10001040
I don't understand why this is happening, as this is a new computer, and I am the only user. This is XP Media Center Edition 2005
Please help! I can provide whatever info is necessary for help!
HP   Windows XP  

Read elsewhere of two files that needed to be removed in C:\windows\system32 in order for Quicktime to reinstall successfully. Upon doing so, I was then able to install iTunes. Seems to be working now!

Similar Messages

  • SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

    SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
    after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
    Thanks and Regards, Rangnath Mali

    Hi Rangnath,
    For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
    Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • ITunes won't start after reinstalls and iPhone problems

    last time I think I clicked Never Register on iTunes after plugging my iphone,downloaded some podcasts to my phone,everything seems alright before that,but then my iphone won't sync properly with itunes...
    iTunes keeps saying Syncing Iphone (sometimes it stops,but it doesnt say Sync is complete,on the left side it's still syncing) but after a while my iPhone goes back to its normal state (Slide to unlock,not to cancel) after I cancelled a sync (it took more than 2 hours,that's why I cancelled it,after the cancellation it became even more messed up)...
    Deleted the podcasts and deauthorized iTunes store,still doesnt work.
    What's the solution to sync my iphone normally again??
    I did reboot on both my iphone and PC and they don't work,
    I'm using Vista 32bit and Iphone 3G 2.2.1
    I tried updating iTunes to 8,1,now everytime I connect my phone via usb,iTunes will crash....removed iTunes and installed previous versions including 8.01 and 8.02...still not working
    after I installed 8.0,iTunes won't even open...
    removed itunes and installed other versions including 8.1 again,they won't even open even after I completely removed iTunes & quicktime and used windows install cleanup...,reboot many times,deleted Temp folder....still doesnt work...
    but the Itunes and iTunes helper processes are there on the task manager,I cant even kill them
    sorry,I don't know where to post this...
    please help,guys..
    thanks

    I have update iTunes to the latest version yesterday.
    Up to her everything is fine. Due to ther issues I
    had to go back to the Windows RESTORE point previous
    to the iTune installation.
    When I start iTunes I get the following pop-up:
    "iTunes cannot runbecause some of its required files
    are missing. Please reinstall iTunes".
    I do that and when iTunes try to connect to the store
    it shows broken links and the whole thing hangs.
    I have tried to unistall iTunes, but it does not help
    at all. This means that I do not have connection to
    iPod. I cannot believe that I have to re-install all
    my PC bcause of this.
    I have discovered that QuickTime is corrupted. I cannot unistall it and if I try to re-install it nothing happens.
    Is there a manual way of removing it from the system?
    Which keys/modules do I need to remove?

  • Itunes won't start after upgrading

    I just upgraded to itunes for windows 6.0.5 and now it won't start. The windows error report box comes up. Please help!

    don't be silly, zenbeer. let's wait until the original poster tells us explicitly what message s/he's getting. there are at least two different error messages that miracon could be getting that fit the information that we've received so far.
    why on earth did you reinstall Windows in response to that error message?
    Itunes has encountered a problem and needs to close
    the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
    try to open your QuickTime. does it launch properly, or do you get an error message?
    if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Standalone Installer
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

  • Assistant NET8 and DBCA won't start after installation HELP

    HEllo,
    I've installed oracle 9.01 and later on 8.1.7 i cannot use the assistants net 8 and dbca after installation. Does anybody have the same problem. I think is has something to do with jre versions.
    I alse got the same problem when i installed db9.0 and oracle appserver 1.2.2.2 on the same machine. SOme config assistant won't start after install.
    ALready tnx.
    Francus

    Hello, yogendra k saini
    I'd installed oracle90 and 1.2.2 in different oracle homes. There was no error message. When i pressed the icon. Nothing happens.
    Yesterday i installed also a 8.1.7 database on the same machine as the 9.0.1.4 database. After a reinstallation of appserv 1.2.2a everything seems to work fine.
    but it is still a mystery for me why, because when i only install a 9.0.1.4 database and appserv 1.2.2.2 something goes wrong. Maybe APpserv 1.2.2. doesn't work fine with 9.0 database. That's not exactly true because i used appserv 1.2.2 for forms en reports...
    gr.
    Francus

  • Itunes won't start after update to 11.1

    after updating to version 11.1, iTunes won't start anymore.
    Below the problem signature (dutch).
    Any suggestions to solve this?
    Probleemhandtekening:
    Gebeurtenisnaam van probleem: BEX
    Naam van de toepassing: iTunes.exe
    Versie van toepassing: 11.1.0.126
    Tijdstempel van toepassing: 52394b24
    Naam van foutmodule: StackHash_0a9e
    Versie van foutmodule: 0.0.0.0
    Tijdstempel van foutmodule: 00000000
    Uitzonderingsmarge: 00000000
    Uitzonderingscode: c0000005
    Uitzonderingsgegevens: 00000008
    Versie van besturingssysteem: 6.1.7601.2.1.0.256.4
    Landinstelling-id: 1043
    Aanvullende informatie 1: 0a9e
    Aanvullende informatie 2: 0a9e372d3b4ad19135b953a78882e789
    Aanvullende informatie 3: 0a9e
    Aanvullende informatie 4: 0a9e372d3b4ad19135b953a78882e789
    Lees de onlineprivacyverklaring:

    After updating to OSX 10.9.3, my iTunes won't open. If I try to drag it to trash, I get the message "iTunes can't be modified or deleted because it is required by OS X".

  • Itunes won´t start after upgrading to the latest version....

    Hello everyone. After updating to the latest version of itunes it won´t start.I get the message itunes will be shut down due to the data execution prevention. After i followed the troubleshooting guide from windows to shut down the dep for itunes i get the message: This program cannot run without dep. pls help

    Quicktime doesn´t work properly. The program will be shut down. You´ll be noticed when a solution is available
    Many thanks.
    That and the iTunes DEP error suggest that some application (other than QuickTime itself) has stashed old QuickTime componentry down in your system files.
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    *If you have a 32-bit version of Windows,* open the "System32" folder.
    *If you have a 64-bit version of Windows,* open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • ITunes won't start after upgrading to v9 on WinXP

    I dutifully upgraded to iTunes 9, and now it won't start. It attempts to start, and I get a few moments of the hourglass icon. And the Task Manager shows the iTunes process is running. But the UI never appears. I tried deleting via the control panel and reinstalling but same problem. Never had a problem before - this is aggravating since I don't have access to my library and there doesn't seem to be a way to downgrade back to v8. I turned off (actually deinstalled) Norton but that didn't help. Tried disabling a bunch of start up processes at boot time and that didn't help either. Any ideas would be greatly appreciated!

    I had a similar issue. After doing the upgrade, tried to open iTunes & got an error message saying that I needed the latest Quicktime version and telling me to uninstall and reinstall iTunes. Doing so resulted in the same error message.
    Per a suggestion in another thread here, I repaired Quicktime (control panel- add/remove programs- Quicktime- repair). This disappeared iTunes but once I reinstalled it the problem went away.

  • ITunes Won't Start After Airport Upgrade

    After running the latest upgrade to Airport Utility and upgrading the firmware on my Airport Extreme, I lost all access to my iTunes library that is housed on a Drobo attached to the Airport. When trying to start iTunes, I get error "13005".
    I normally access my library from both a Windows XP/SP3 box and a MacBook. I have tried the following steps:
    1) deleted genius.itdb and extras.itdb.
    2) Repaired iTunes install.
    3) Removed and reinstalled iTunes.
    4) Plugged the Drobo directly into the Windows box (no airport or USB hub).
    Still no love. I was able to rebuild my library via my MacBook, and I created a Windows XP user account which can successfully run iTunes and see the library once I rebuilt it. However my main XP account (with Admin access) still cannot start iTunes.
    Any thoughts would be greatly appreciated. Thanks.
    Fogbert

    Thanks Katrina. I was able to find what I needed through the link that you provided.
    To those that are having this problem, here's what I did to fix this issue:
    +If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
    +1. Open AirPort Utility.+
    +2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
    +3. Select the specific firmware version you require.+
    +4. Click Download.+
    +5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
    +6. Choose Base Station > Upload Firmware.+
    +7. Select a firmware version and click OK.+
    +An important note about installing firmware+
    +After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
    http://support.apple.com/kb/HT1218
    I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
    All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

  • My itunes won't start after the latest update, it says, "itunes.exe bad image

    After I installed the lastest itunes and went to start itunes, I got an error: itunes.exe bad image.  and inside the error box said, " C:\Windows\system32\dssenh.dll is either not designed to run on windows or it contains an error. Try installiing  the progam again using the original installation media or contact yoour system administrator or the software vendor for support."
    What to do? I have tried uninstalling it and reinstalling it numerous times. HELP!!

    many thanks.
    Let's try an sfc /scannow. On a Windows 7 system, see the instructions from the following document:
    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

  • ITunes won't start after upgrade

    Since I upgraded iTunes everytime I try to start it up I get the following error;
    "iTunes cannot run because it has detected a problem with your audio configuration."
    Anyone else having this issue?
    Dave

    QuickTime doesn't appear in Control Panel Add/Remove Programs so I can't remove it. I can see QuickTimePlayer.exe in C:\Program Files\QuickTime, but when opened I get the error
    "Runtime Error! Program: C:\Program Files\QuickTime\QuickTimePlayer.exe
    Okay, let's try swapping your QuickTime out by other means.
    Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
    Description of the Windows Installer CleanUp Utility
    Next, we’ll manually remove leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • Safari won't start after showing an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.

    Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
    This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
    I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
    MacBook Pro (Retina 13-inch, Mid 2014)
    Processor 3 GHz Intel Core i7
    Memory 16 GB 1600 MHz DDR3
    Graphics Intel Iris 1536 MB
    Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
    Thanks!

    There is no need to download anything to solve this problem.
    If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
    You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
    Back up all data before making any changes.
    Besides the files listed in the linked support article, you may also need to remove this file in the same way:
    ~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
    After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
    Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • After installation getting error(sapdp00: not reached)

    Hi everyone,
    I installed the Netweaver sp12 ABAP trial version on my system. I have windows XP as OS. The installation was error free and I my system is not connected to any network. I created NSP local and configured as in the html file start.html. But when I try to log in using this NSP local I get an error message that says sapdp00: not reached. I dont know what to do now. maybe some problem in configuring the loop back adapter or somr other network issue. It would be a great help if someone can help me out.
    The actual error message :
    partner '127.0.0.1:sapdp00' not reached
    WSAECONNREFUSED: Connection refused
    Regards,
    Mayank
    Edited by: Mayank Vatsal on Mar 12, 2008 5:23 AM

    > an error that says Win+disp.exe has encountered a problem and needs to close down..
    Yaiks, that sounds as if Windows is killing the services as soon as they're started. Maybe the SAP software is interfering with some other program(s) on your PC and that could be a very difficult one to find.

  • ITunes won't start after update

    Hi,
    I just upgraded my ITunes using the normal Apple update process when I was prompted - and now I-Tunes won't start at all.
    I can see the ITunes.exe start in Windows Task Manager....then it just shuts down again.
    Any ideas ?

    I tried another solution :
    1. Un-install I-Tunes
    2. In-install Bonjour
    3. Reboot
    4. Install latest I-Tunes
    This seems to have fixed the problem.
    So it looks like BONJOUR IS THE PROBLEM.

  • Itunes won't start after Win 7 wakes up

    I've noticed a lot of Win 7 users not able to launch iTunes or it takes many minutes. I found by accident that it only happens after my Win 7 PC has been in sleep mode. If I re-boot my PC it starts almost instantly? Anyone found an answer to this? In the mean time I'm just turning power saving off.

    I have now found that the problem relates to a USB hard drive which I disconnected a while ago. after re-connecting it iTunes works fine. I am guessing that iTunes was searching for files on the missing drive? anyway I hope this may help someone else.

Maybe you are looking for