ITunes won't start in Win7 - tried everything, no luck

I've had an iPod Nano for only a few months. iTunes worked one day, then the next it does not.
I'm running Win7, 64bit, iTunes version 10.6.0.40 (the latest).
When I attempt to launch iTunes (from the Start menu) I can see iTunes.exe briefly launch in the Task Manager. I also see AppleMobileDeviceHelper.exe and distnoted.exe in the Task Manager as well.
All three of these close by themselves. No error message, nothing on screen, iTunes does not even display an icon on the task bar. If I didn't have the Task Manager open it would look like nothing is happening (which really it isn't).
I've tried uninstalling and reinstalling, now on the latest version of iTunes. I've tried the Repair option in the Control Panel, I've tried running as Admin... nothing works.
I can see my Nano as a drive in my Computer, but of course can't do anything with it. If I plug the nano into my work computer, also Win7 64, iTunes runs without a problem.
What else is there to do? Any suggestions? iTunes is just now a waste of space on my computer.....
Thanks!
Karl.

I just tried the Win7 msconfig option, again with absolutely no luck, and the same 3 processes starting then closing in the task manager.
Looks like so many people having this issue, and nothing from apple to fix it!!!

Similar Messages

  • Ipad won't start at all tried everything

    i pad will not start at all. I tried holding both keys down to reset it, nothing. Battery should be fully charged. I also tried to conect it to Itunes, still nothing.The screen is totally black and it flashes a bit.

    If you have tried everything with no change, the iPad has a hardware problem.
    Make an appointment at an Apple store if there is one nearby.

  • ITunes won't recognise my iPod. tried everything!

    hmm...yes, well...
    i reformatted my computer a couple of weeks ago..i backed up all my music on an external hard drive. the whole process was absolutely painless until i tried to sync my 5th gen 60gb iPod to my recovered itunes library. if iTunes (7) is running and i plug in the iPod, iTunes freezes for a while, unfreezes, and then...does nothing. if i close itunes at this point and then reopen it, it doesn't appear for about 7 minutes then appears and syncs my iPod perfectly! further problems occur when i try to eject it, however...it causes iTunes to freeze alltogether which leaves me with no other choice but to end the programme. I've tried everything i can think of...i ran the "iPod diagnostics" and it gives a green light on the first three tests and then a red on the "iPod connection status". i've tried everything on the help page the diagnostics screen leads me to (http://docs.info.apple.com/article.html?artnum=93716) and nothing has had any effect. i've also tried restoring the iPod but that also causes iTunes to freeze! please help..
    PS. apologies for incoherence and computer ineptitude..

    remove itunes and quicktime
    download Windows Installer Cleanup Utility (sept 2006 ver.3)
    http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1b d/msicuu2.exe
    reinstall with updated itunes (with quicktime)

  • Updated to iTunes  - won't connect to Store - tried everything!

    I've been through all KB items, tested everything suggested.  Here is text of diagnostics:
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was unsuccessful.
    An unknown error occurred (-50).
    Connection attempt to purchasing from iTunes Store was unsuccessful.
    An unknown error occurred (-50).
    Connection attempt to iPhone activation server was unsuccessful.
    An unknown error occurred (-50).
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-02-14 15:09:39.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • ITunes won't open, I've tried everything

    I am hoping that someone can help as I've been having this problem since 3/23. My iTunes will not open. Everytime I try I get the generic "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." message. I have uninstalled and reinstalled several times. I have checked for problems with quicktime. Quicktime works fine. I have tried setting up a new user account to see if it works there, it does not. I have tried a system restore on my laptop, I have run a registry cleaner, I have done everything short of offering my first born to get it to work. Please help. I really hate having to use windows media player. Thank you so much!

    ya, I have the same problem. Restarting the computer seems to make iTunes work again, at least for me, but even after doing that, iTunes still stops working a lot. I wish they could just come out with that update that will fix all this. If i find anything that might fix it, I'll reply again and tell you how to fix it, 'cause I've been trying to fix this thing almost all day everyday.

  • Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

    Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

       Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

  • My itunes won't work so i tried reinstalling and when it starts an error pops up that says: "the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the insta

    my itunes won't work so i tried reinstalling and when it starts an error pops up that says:
    "the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the installation package 'Itunes.msi' in the box below
    please help, its frustrating

    first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
    next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
           next download itunes. it worked for me hope this is helpful!!
        oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

  • Please help - iTunes won't start anymore: unknown error -69

    Hello out there,
    please can anybody help me: all of a sudden my iTunes won't start any more - it only shows a message stating an unknown error -69 and then quits.
    I did not change anything on my system before that, so I just don't know what could trigger that...
    I am using iTunes 7.0.2 on Windows XP SP2, both German versions.
    Before posting this question I searched the archives and tried the following, all to no avail:
    1. disabled "safe mode" in QuickTime audio options -> problem remains
    2. set speakers to "stereo headphones" in Windows sound options -> problem remains
    3. deinstalled iTunes, downloaded the installation file again and reinstalled it -> problem remains
    4. deinstalled iTunes and QuickTime, downloaded QuickTime stand-alone version, installed this and afterwards iTunes again -> problem remains
    5. deinstalled iTunes and QuickTime again, deleted all iTunes and QuickTime data folders, reinstalled everything again -> problem remains
    6. ran a CHKDSK an the drive iTunes is on -> no problems found
    It still won't start, always giving this unknown error -69.
    Please, does anybody know what to do?
    Any hints and help are much appreciated!
    Thanks a lot
    and best regards
    Frank
    PC   Windows XP  

    See if this helps: iTunes displays a -69 error when syncing iPod

  • IPod Touch not recognized in Windows & iTunes won't start unknown error -50

    I have been trying to fix a connectivity issue with my iPod touch for almost 6 hours now. I've read all over the iPod Touch forums and none of the solutions worked for me. I've installed and uninstalled iTunes multiple times and nothing seems to work.
    Also, earlier this evening iTunes was working but it wouldn't recognize my iPod touch although it would charge. Now that iTunes won't start I'm also having problems with charging my iPod and at no time, was my iPod ever recognized in 'My Computer'.
    Someone please help! I'm at my wits end without being able to use and update my iPod. All help/insight/suggestions are appreciated and thanks in advance!

    AppleNEve wrote:
    I double checked to make sure that the cable is not faulty and it's working perfectly.
    how did you test that ?
    anyhoo, you might want to give this a shot:
    +Hi, All,+
    +It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
    +Restart the device without connecting to your pc and+
    +Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
    +Best of luck.+
    here's the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
    if still no joy, it could be that your Touch is a goner. if it is still under warranty, you should plan a trip to the nearest Apple store.
    JGG

  • ITunes won't start up when connecting iPhone

    My wife has been having this trouble for awhile, and now I started having the same trouble too. She has an iMac G5 running latest versions of Leopard and iTunes. I have a Power Mac G4 (Gigabit Ethernet model) running the latest version of Tiger and iTunes I also have a USB 2.0 PCI card which has already been tested and is operating properly. Both of our iPhones are the original model running iPhone 2.0, but this problem was happening on her setup before the 2.0/MobileMe fiasco.
    Basically, iTunes won't start on her machine when she sets her iPhone into the iPhone Dock, even though it does show that it is charging. When she clicks iTunes, it syncs new data from her iMac to her iphone, but new data on her iPhone doesn't transfer to her iMac (remember, this is BEFORE the MobileMe/2.0 update). I've tried different sync cables, plugging it in to different USB ports, and always it's the same- it may work properly when I unplug the cable and plug it back in again, but after I remove the iPhone from its dock and set it back in, it malfunctions the same as I just described. It initiates a sync if iTunes is running, but not if iTunes is shut down. The crazy thing is, her syncing was working perfectly both ways until about two months before the MobileMe/2.0 switch, so I know it has nothing to do with that.
    Today, my Power Mac and iPhone started displaying the same symptoms, but with a twist- I put my iPhone into its cradle, and nothing- no charging screen and tone, no syncing startup, nothing. I turn iTunes off, pull the iPhone out of the cradle, and set it back in again- nothing. iTunes won't even start up; and when I start it up myself, it still doesn't recognize the iPhone is there. I plug the iPhone into a wall charger using the same cable I sync with, and it starts charging with no problems. I plug my iPhone cradle back into my external USB hub, connected to one of the USB 1.1 ports, and the syncing/charging works flawlessly. The weird thing is, my 4th Generation iPod Photo is on a different dock with a different cable, plugged into the same USB 2.0 card, and iTunes starts and syncs with no problems with that iPod every time.
    I've taken my wife's iMac, her iPhone, and her iPhone dock and cable in to the Apple Store's Genius Bar, but they weren't able to figure out the problem. They tried to redirect the syncing issues by trying to demonstrate iPhone 2.0's wireless push/pull capabilities, but they couldn't get that to work properly, even though all the settings on the imac and the iPhone were correct. All they could suggest was that I must have had a "bad upgrade" when I upgraded to Leopard (6 months ago?!?), and that I should try an "Archive and Install" of Leopard again to see if that sorts out the issue- something I do not really have the time to do (and my wife can't really be without her Mac for that long since she uses it for work).
    I see a lot of similar issues on Apple's iPhone support pages with iTunes not recognizing iPhones when they're plugged in, or not charging when plugged in, etc. I've spent a lot of money on our Macs and our iPhones based on the idea (from Apple's own marketing) that Apple's products "just work". And darn it, with all the money I've invested into these products I just want them to WORK- EVERY TIME, without fail! These are the kind of problems I left behind in the Windows world, and I don't want their ugly heads to surface here too.

    AND ALSO I TOTALLY UNINSTALLED ANY OF MY
    ANTIVIRIS THINGYS AND THE SPYWARE STUFF.I D/K WHAT TO
    DO ANYMORE!
    *~PLEZ HELP ME!~*
    Hi yesy
    If you are sure you disabled your AV/antispy and you get the flash of a licence it sounds like you may have a malware infection. Look out for posts by b noir and get hold of ewido - its a free AV programme - google and you should find.
    BTW, you may be in Florida and I'm in the UK, but don't shout - you're just next door in cyberspace!:) I understand your frustration coz I've been in your place. There are some really helpful folks on this forum - seek, and you shall find!
    Local retailer custom built pc. Pentium 4 chip 2.4GHz Windows XP SP2 20Gb iPod
    Local retailer custom built pc. Pentium 4 chip 2.4GHz   Windows XP   SP2 20Gb iPod

  • Itunes won't start-says it has to shut down

    i started having problems with itunes and downlaoded the new itunes. won't start. in the error report it sayd its a compatability issue. when i send the report to ms though, they claim it to be an itunes problem. i could use a lot of help.

    +when i tried to start quicktime it produced the same message as itunes with a little change to it. in the last part of the code it was 1482appcomp.txt.+
    That problem will be causing the iTunes problem.
    So let's try swapping out your existing QuickTime for a fresh copy.
    Head into your Add/Remove programs. Uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
    7. Restart your computer.
    Next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    Switch off antivirus and antispyware applications prior to the repair install.
    Go into Add/Remove and select itunes. click "Change" and then click "Repair".
    If the repair install goes through okay, restart the PC and try launching itunes again. Does it launch properly now?
    (If, however, you get an error message on any of the install or uninstalls, let us know what that message says. Precise text, please. Include any error message numbers if you're getting any.)

  • Itunes won't start up - can't find usr/lib/libstdc++.6.dylib

    Hi,
    I had to reinstall the OS 10.3.9 on my ti-book. I did an archive and install, but now iTunes won't start up. Console says it can't find this dynamic library:
    usr/lib/libstdc++.6.dylib
    Since I have a lot of my songs in my personal lib on this machine, and podcast susbscriptions, etc - I don't want to lose them if possible.
    Is there a way to just install this lib, or will I have to reinstall iTunes altogheter?
    I searched for the above file, but can't find it on the disk.
    thx.
    'mark

    Do you have any iTunes plugins? You may want to get rid of them and try again.
    Also, have you tried removing the corresponding com.apple.itunes.plist files from <youraccount>/Library/Preferences, logging out, logging back in again (or rebooting) and then relaunching iTunes? I don't think an archive and install will refresh this file for you. Nor will reinstalling iTunes.

  • ITunes won't start and asks to reinstall after iTunes10 update.

    iTunes won't start and asks to reinstall after iTunes10 update. I have tries reinstalling, but it comes up with it again. I have uninstalled every Apple program and reinstalled them but still the same.

    What's the precise text of your message, Callum? There's a few different ones I can think of that mention reinstalling iTunes.

  • TS1717 itunes won't start because it says the folder was made in newer version, what should be done?

    itunes won't start because it says the folder was made in newer version, what should be done?

    If you haven't deliberately tried to downgrade iTunes then it is possible the library is corrupt. This approach should work.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!

    Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

Maybe you are looking for

  • Business role in IC

    Hi experts, I have a confusion on understanding Business Roles in interation center. scenario: call center set up is there with 100 CSR's, where everyones role is same. here my confusion is Do we have to create different business role for each CSR or

  • "A Bad Filename or volume name encountered" ?!!!

    I searched but I didnt find an answer for this problem. I get the message "Bad Filename or volume name encountered" when I try to play a video file with Quicktime. When I try to add it to my playlist on iTunes it doesnt add it. All of this happened a

  • Distiller will not create a .pdf file

    Yesterday, I noticed-out-of-the-clear-blue-sky- that whenever I tried distilling a layout file in .eps, I kept getting 'Error' messages whenever I tried Distilling anything and Distiller wouldn't create a .pdf file! This is what I recieved. %%[ Error

  • Video problems in aperture 3.0.3

    In aperture 3.0.3 imported videos show the video correctly in the thumbnail preview, but when played in the viewer view there is only the sound and a black picture. Why? Thank you for your help.

  • Connecting to IPCC DB (db_cra) using Business Objects

    Hi, I've been tasked with creating a Business Objects universe against a CISCO IPCC SQL Server database (db_cra), and I have no knowledge of the database and how the system works.  I also don't have access to the database outside of Crystal Reports.