ITunes won't start - memory cannot be "read"

This may have something to do with the upgrade, but I'm not sure. Everytime I start iTunes i get an Application Error message for iTunes.exe
The instruction at "0x74614d69" referenced memory at "0x74614d69". The memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program
Debugging does nothing, hourglass goes for a bit but then nothing.
Its driving me nuts, I can't play my music!!! I have tried uninstalling and reinstalling both iTunes and Quicktime. several times. I have also defragged my hard disk.
Help me!!!

I have the same problem.
I sent my ipod photo 20 back under guarantee because it stopped working, and it came back today and now all I get is the same messages.
I can't put my music back on my ipod
Can anybody help please?

Similar Messages

  • Itunes won't start. says "cannot be read be read. created by newer version of itunes"

    I recently restored my iphone and also updated itunes. now, when i try to open itunes it says, "the file itunes library.itl cannot be read because it was created by a newer version of itunes"

    Check out the "More Like This" section to the right.
    In the future, it's faster to find a resolution by searching the forums prior to posting.

  • Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

    Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

       Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

  • ITunes won't start: Not Enough Memory

    I downloaded iTunes 8, used it once-fine, tried to change the skin with Kameleon, now iTunes won't start. I get the error message: The iTunes application could not be opened. There is not enough memory available. I changed the skin back to the default, removed Kameleon from my system completely, shut down and restarted the MacBook and tried to open iTunes again. And, again the same error. Is this an iTunes issue with the new version or is this truly a memory problem??

    I got this exact same error just now!
    I also have Kameleon but didn't bother to change the skin on itunes.
    It kinda ***. So it's Kameleon's problem or iTunes?

  • Suddenly, iTunes won't start.  HELP!

    I recenlty upgraded my MacBook OS to Lion, and now iTunes won't start up.  I got the following message:
    The file "iTunes Libarary.itl" cannot be read because it was created by a newer version of iTunes.  Would you like to download iTunes now?"
    I then checked to see if there was a new version of iTunes.  There was, and I downloaded it (along with several other downloads for other apps), but I still get the same message.  I rebooted the computer, but that didn't help.
    Interestingly, I looked at the installed software section of Software Update and all the packages I downloaded today are listed...except for iTunes.  So, I checked again for software updates, but iTunes doesn't come up as available for download.
    The "Get Info" window for the iTunes I currently have installed indicates it's v. 10.3.1, which I'm guessing is not the latest version.  So what happened to the download, and how can I find it to try again?
    Thanks.
    Rich

    UPDATE:
    I was able to find out how to download the latest version of iTunes and it's now opening and working fine.  Thanks.

  • IPod Touch not recognized in Windows & iTunes won't start unknown error -50

    I have been trying to fix a connectivity issue with my iPod touch for almost 6 hours now. I've read all over the iPod Touch forums and none of the solutions worked for me. I've installed and uninstalled iTunes multiple times and nothing seems to work.
    Also, earlier this evening iTunes was working but it wouldn't recognize my iPod touch although it would charge. Now that iTunes won't start I'm also having problems with charging my iPod and at no time, was my iPod ever recognized in 'My Computer'.
    Someone please help! I'm at my wits end without being able to use and update my iPod. All help/insight/suggestions are appreciated and thanks in advance!

    AppleNEve wrote:
    I double checked to make sure that the cable is not faulty and it's working perfectly.
    how did you test that ?
    anyhoo, you might want to give this a shot:
    +Hi, All,+
    +It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
    +Restart the device without connecting to your pc and+
    +Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
    +Best of luck.+
    here's the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
    if still no joy, it could be that your Touch is a goner. if it is still under warranty, you should plan a trip to the nearest Apple store.
    JGG

  • Itunes won't start-says it has to shut down

    i started having problems with itunes and downlaoded the new itunes. won't start. in the error report it sayd its a compatability issue. when i send the report to ms though, they claim it to be an itunes problem. i could use a lot of help.

    +when i tried to start quicktime it produced the same message as itunes with a little change to it. in the last part of the code it was 1482appcomp.txt.+
    That problem will be causing the iTunes problem.
    So let's try swapping out your existing QuickTime for a fresh copy.
    Head into your Add/Remove programs. Uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
    7. Restart your computer.
    Next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    Switch off antivirus and antispyware applications prior to the repair install.
    Go into Add/Remove and select itunes. click "Change" and then click "Repair".
    If the repair install goes through okay, restart the PC and try launching itunes again. Does it launch properly now?
    (If, however, you get an error message on any of the install or uninstalls, let us know what that message says. Precise text, please. Include any error message numbers if you're getting any.)

  • Itunes won't start up - can't find usr/lib/libstdc++.6.dylib

    Hi,
    I had to reinstall the OS 10.3.9 on my ti-book. I did an archive and install, but now iTunes won't start up. Console says it can't find this dynamic library:
    usr/lib/libstdc++.6.dylib
    Since I have a lot of my songs in my personal lib on this machine, and podcast susbscriptions, etc - I don't want to lose them if possible.
    Is there a way to just install this lib, or will I have to reinstall iTunes altogheter?
    I searched for the above file, but can't find it on the disk.
    thx.
    'mark

    Do you have any iTunes plugins? You may want to get rid of them and try again.
    Also, have you tried removing the corresponding com.apple.itunes.plist files from <youraccount>/Library/Preferences, logging out, logging back in again (or rebooting) and then relaunching iTunes? I don't think an archive and install will refresh this file for you. Nor will reinstalling iTunes.

  • ITunes won't start and asks to reinstall after iTunes10 update.

    iTunes won't start and asks to reinstall after iTunes10 update. I have tries reinstalling, but it comes up with it again. I have uninstalled every Apple program and reinstalled them but still the same.

    What's the precise text of your message, Callum? There's a few different ones I can think of that mention reinstalling iTunes.

  • Update 7.43 to 7.6 - iTunes won't start  but have iTunes.exe Task

    Hi There!
    I updated my Company-Computer from iTunes 7.4.3 to 7.6 and now iTunes won't start.
    All it does is: It shows the waitcursor for a few seconds and I get a Task in the Taskmanager that says iTunes.exe
    But it won't show the EULA where I am asked to accept Apples Terms.
    I updated my Laptop too and that works fine.
    I checked all the Services that where running (on both systems) and they where identical.
    What else could prevent the EULA window from appering? And if I acceped the EULA would iTunes start ok?
    Has anyone had the same problem and what could I do?
    So far I deinstalled iTunes and everything else (AppleLike) and cleaned the registry of all iTunes and Quicktime branches. After a reboot I installed it again - so far it didn't help.
    Has anyone an idea what I could try else (reinstalling windows ist out of the question since it is may workplace PC; everything else works fine.
    Thanks in advance
    René

    Hey Everyone,
    I am going to add to the long list of outrage. I JUST purchased (like literally...9 hours ago...) an 8GB iPod Touch and after installation I ran into the EXACT same problem. Since I am a new owner this is the first time I have iTunes installed on my computer. So of course I downloaded the most recent version (as instructed). Like everyone else in this thread is saying, you try to open up the iTunes application but the GUI doesn't appear at all. Apparently "something" is running because its process is active in the Task manager but there is nothing on my screen! What's the problem here??? I've done everything short of reinstalling XP (thats actually kind of unnecessary as you shouldn't have to uninstall an entire OS just to get an application to work...update files or clean the registry--sure...uninstall then reinstall--no..). Yes, obviously this is an Apple product so there won't be many (if any) conflicts when connecting to an Apple device (like a Macbook). But seriously guys....seriously???
    What is more outrageous to me, besides the fact that this is a widespread problem...is the fact that this is a CURRENT problem that has YET to be even identified or rectified by anyone from Apple. I went on this forum, thinking that this was some known occurrence that happened maybe months ago and could be fixed immediately--but I am viewing messages from this week and even TODAY!
    This is absolutely unacceptable. Who needs to be contacted concerning conflict resolution with Apple hardware? Or does Apple wish to have another iPhone-esque debacle like a few months ago?
    Not to be rude, but I am not the average user that knows nothing about software and/or hardware (as I'm sure alot of others are knowledgeable). I am not "that person" that doesn't plug in the computer into the outlet then wonders why its not working. I don't mean to come here with an air of anger but this is truly ridiculous...lets get the ball rolling on a fix or start drafting up those $299.99 refunds...

  • Itunes won't start on vista home premium

    I installed Vista Home Premium and did a fresh install of iTunes (7.1.1.5).
    iTunes won't start and gives an error (iTunes won't start):
    Eventname: APPCRASH
    Name: iTunes.exe
    Version: 7.1.1.5
    Timestamp:45f8a616
    Name of the errormodule: StackHash_03ef
    I can't seem to find the solution in the Forums and internet.
    I deinstalled and reinstalled iTunes several times but it still gives the same error.
    Quicktime also won't start.
    Any help is appreciated.

    I deinstalled all codecs (including Nero), because windows vista solutions also pointed me in that direction, but no luck yet..
    okay. we'd better try swapping out your QuickTime now that the codecs are out of the way.
    sometimes with that sort of "error message free" launch failure with QuickTime, Add/Remove doesn't want to get rid of the QuickTime. so we'll try the following technique if that happens:
    Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
    Description of the Windows Installer CleanUp Utility
    Next, we’ll manually remove leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • Itunes won't start after update to 11.1

    after updating to version 11.1, iTunes won't start anymore.
    Below the problem signature (dutch).
    Any suggestions to solve this?
    Probleemhandtekening:
    Gebeurtenisnaam van probleem: BEX
    Naam van de toepassing: iTunes.exe
    Versie van toepassing: 11.1.0.126
    Tijdstempel van toepassing: 52394b24
    Naam van foutmodule: StackHash_0a9e
    Versie van foutmodule: 0.0.0.0
    Tijdstempel van foutmodule: 00000000
    Uitzonderingsmarge: 00000000
    Uitzonderingscode: c0000005
    Uitzonderingsgegevens: 00000008
    Versie van besturingssysteem: 6.1.7601.2.1.0.256.4
    Landinstelling-id: 1043
    Aanvullende informatie 1: 0a9e
    Aanvullende informatie 2: 0a9e372d3b4ad19135b953a78882e789
    Aanvullende informatie 3: 0a9e
    Aanvullende informatie 4: 0a9e372d3b4ad19135b953a78882e789
    Lees de onlineprivacyverklaring:

    After updating to OSX 10.9.3, my iTunes won't open. If I try to drag it to trash, I get the message "iTunes can't be modified or deleted because it is required by OS X".

  • Itunes won't start up in Windows 7

    iTunes won't start up in WIndows 7. Double click on it and it looks like it is going to start but nothing happens...

    I am having the same problem. I didnt have quicktime on my computer, so i downloaded that and still not opening. I have re-installed it 3 times, restarted my computer multiple times. try'd launching in compatable mode (95,xp,and vista), tried running as admin, and  have tried restoring previous versions,and now even those wont start. It was working fine, untill i installed the new update 2 days ago. i think it was update 11.0.1, im pretty sure i had 11.0.0
    Any other suggestion?

  • Itunes won't start when i plug in my ipod

    itunes won't start when i plug in my ipod touch

    Good catch! Glad you got things working again.

  • ITunes won't start up! help!

    my itunes won't start up at all. I've been having this problem for about two weeks now and i've reinstalled it and tried to repair it but nothing seems to work. does anyone know what's up? someone please help me!

    yeah...still need help...thanks
    Dell   Windows 2000  

Maybe you are looking for

  • Safari CRASH

    My Safari crashes with the following crash report. Any help would be strongly appreciated: Process: Safari [239] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: Safari Version: ??? (???) Code Type: X86-64 (Native) Parent Process: sh

  • Officejet Pro 8600 Plus, N911g sends faxes, but won't receive

    Hello, My printer will send faxes, but not receive them. Windows 7 Pro 64 bit, SP1.  The printer is connected to the computer via wireless.  The phone is Comcast Digital Voice.  The printer is the only device connected to the phone line.  Per techs a

  • Urgent! QT conversion automatically turn HD interlace video to Progressive

    I try to use quicktime to convert a HD clip to SD. I'm sure the HD clip was interlaced. But after using quicktime conversion to make a SD version, it turn out deinterlaced. I didn't click on the "Deinterlace" option in the QT conversion window. And t

  • Screen wont tilt anymore after updated to iso7, cant play games anymore

    Help my screen wont tilt anymore after updated to iso7. When playing a game the person wont move when i tilt to left or right. ive unlocked the portrait and still wont work. Nothing tilts when  i trun phone side ways. any help would be great Cheers

  • Deleting all or missed calls

    Is there a way or setting to delete one without deleteing the other? I have gone to RECENTS hit ALL and hit clear and it also clears all MISSED calls and vice versa. This is very frustrating. If anyone knows of a solution this would be great.