ITunes won't work with Apple TV remote speakers

I'm running the most current version of iTunes and Apple TV on both my iMac and Macbook PRO. I can connect to the Apple TV for remote speakers fine from the Macbook PRO but cannot through the iMac. This problem has existed for my iMac for quite sometime now. It was only until recently that I've been able to test this problem against my new Macbook PRO to see what happens. Now at least I know it's the iMac and NOT the Apple TV..
I also restored the Apple TV to factory settings and the remote speaker option worked before the update. After the update, when I select the option for Apple TV for remote speakers it thinks for moment and unchecks what I just checked for remote speakers. No error occurs.
Please help!!!

Does ANYONE know if they can help me? Thanks in advance!

Similar Messages

  • IPod, iTunes won't work with each other

    I have spent the last 2 days trying to update my "new" nano. The first few times I synced it up no problem. Now that I've spent a small fortune on new music, the nano and iTunes won't work together at all.
    First, I have the most up-to-date version of iTunes. Next, I had the software update 1.1.3 for the nano all ready to go when I plugged it in. I hit the install new software button and dear god, if the nano didn't crap out and iTunes lost it and gave me a 1436 error. I had to disconnect the nano and reconnect. I tried several times, but finally gave up on updating the software.
    I went on to try to sync the nano and iTunes so I could at least listen to my music at work, but iTunes now says I'm not authorized to play ANY of my purchased music (recently purchased or stuff I've had on there for years) on my computer so it won't copy it onto my nano. So I deauthorize and reauthorize my computer several times, I've read every possible troubleshooting/solution guide I can find on the site and NOTHING works. I can play all my purchased music in iTunes once I've reauthorized my computer, but as soon as I plug my nano in - forget about it - "You are not authorized to play this music on this computer" crap. And I can't even restore the nano b/c I get that stupid 1436 error - and believe me I tried everything those help pages suggest.
    I'm at a loss here and not in the least bit happy with this thing.

    Problem solved. The harddisk was formatted and Windows and iTunes re-installed. Hopefully this problem won't appear very soon.

  • Itunes won't work with windows 8

    Itunes doesn't work with windows 8 after I install it.

    See Install & Update here >  http://www.apple.com/support/itunes/install/
    Also see Downloading Content in the same link.

  • Ipod Classic 80gb won´t work with apple universal dock and remote

    I own 2 ipods a 5th generation 60gb and an ipod classic 60gb. I've just bought an apple universal dock with remote and the original apple component and composite AV cables. I connected the universal dock to my TV via the composite cable, with my ipod 5th gen I can watch videos on the TV and control the ipod with the apple remote but when I connect my ipod classic to the universal dock it will charge but I can´t get any video out or control the ipod with the remote. It's as if the ipod classic doesn't recognize the universal dock and it keeps showing the connect the video accessory screen, even when i tried using the apple component AV cable. I dont think the problem is with the universal dock because it works fine with my Ipod video 60gb, but with my Ipod Classic 80gb the remote control and video out won't work at all, i can´t even control the playback of audio playlists. Does anyone know why that is happenning? Please help me!

    I have the Classic 80gb also...same probem. I retuned the Apple Universal Dock and purchased one that was half the price. Pluged it in and it works perfectly! So my advice would be to save some money and get products that work.

  • I tried to update iTunes but then it won't recongnize my itouch.. Then my itouch had to be restored it said... Now it is a new iPod and iTunes won't work with it anymore.. P.lease help!

    My iPod had an old software... I needed to update it. Then iTunes told me I needed a newer version of iTunes. I did that. I can't remember if there was a problem.. Idk. Then iTunes wouldn't recognize my touch. Then I made a mistake of restoring it and updating it to a new I pod. I figured I could download everything again.. So no big deal. Then something happened with  the iTunes or computer.... And my iPod is like when I first got it. But when I plug it in... iTunes won't recognize it.. Me and my mom are going to apple help. Troubleshooting.. But it is not working!!! Please help

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Sony Headphones won't work with Apple TV

    Can not get Sony Wireless headphones MDR-RF985RK to work when using Apple TV. The sound output will not transfer to the headphones.  I only receive the cable stations.
    Components:
    Philips TV 55PFL505 + AT&T Uverse Cable Box + Apple TV + Sony Wireless headphones MDR-RF985RK.

    Hi there,
    You may want to take a look at the article below.
    Apple TV: Using the Apple Wireless Keyboard
    http://support.apple.com/kb/HT5633
    Compatibility with other Bluetooth accessories
    Bluetooth support on Apple TV is for keyboards only. Headsets, speakers, and other devices are not supported.
    If you are having difficultly connecting or using a third-party Bluetooth keyboard, contact the manufacturer to verify that it is compatible with Apple products and Apple TV.
    -Griff W.

  • ITunes won't work with Windows Vista

    Everytime I try to open itunes I get the error message,  'itunes has stopped working, windows is checking for a solution to the problem'.  That ends everything.
    I have uninstalled, reinstalled, used System Restore, removed all new installs - nothing works.  Pua

    Hi,
    I'm having the same problem. When I open itunes I get the error message saying 'itunes has stopped working, windows is checking for a solution to the problem'. Then sometimes it pops up telling me that itunes has an update that will stop this from happening, but that just takes me to the itunes download page. Sometimes it tells me that DEP has stopped it from working but I can't turn this off for itunes. When I go to the event log I get the following info:
    Fault bucket 3404080028, type 5
    Event Name: BEX
    Response: None
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 11.0.1.12
    P3: 50c8fc7e
    P4: StackHash_fd00
    P5: 0.0.0.0
    P6: 00000000
    P7: 00000000
    P8: c0000005
    P9: 00000008
    P10:
    Attached files:
    C:\Users\Sarah\AppData\Local\Temp\WER166D.tmp.version.txt
    These files may be available here:
    C:\Users\Sarah\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report04f73948
    I've uninstalled and reinstalled itunes and tried to repair it several times. I've also uninstalled quicktime and reinstalled it and it's working fine. I've restarted my computer several times as well!
    I have Vista 32 bit.
    Any suggestions would be gratefully received. I've been on these forums for ages looking for a solution, but it seems like most people solved the problem by just reinstalling quicktime.
    Thanks

  • Itunes 7.7 - problem with airport express remote speakers

    I upgraded to 7.7 and when I try to connect to my remote speakers, itunes either does not play or the sound cuts in and out. Anyone have any suggestions?
    Duq

    Having the same problem have 2 Airport Expresses and have problems with one of them locking up and not appearing on itunes or in the airport utility anymore.
    Switching it to ethernet usage to see if that helps or will try factory reseting it next.
    Have already tried hard and soft resets.

  • Airplay won't work with Apple TV and iPad 2

    I have an iPad 2 running iOS 8.1 and an Apple TV 3 with the latest software and I can't use Airplay to send content to my Apple TV. I know there is no issue with the Apple TV since I can use Airplay to send content to my Apple TV using my iPhone 6, and Macbook, but not using my iPad. Oddly, Airplay will work on my iPad when I connect to my airport express, but not to my Apple TV - Apple TV doesn't appear in the drop down menu yet my airport express does! I have gone through all the usual fixes (restarting, restoring, etc. etc.) - to no avail, my iPad simply can not find my Apple TV for some reason. Any help would be greatly appreciated! cheers, d

    I Have the same problem with iOS 8.2 and the latest OS for the Apple TV. My Apple TV is connected by ethernet as is my iMac. I can stream to the Apple TV from my iMac via this ethernet setup. But my iPad and iPhone 5s with iOS 8.2 won't connect even though I can see the AirPlay button and the sound a pics go blank on the iPhone and iPad .
    I Have been suing AirPlay for several years with no prob,ms until now. I am running Yosemite OS on the iMac.

  • ITunes won't work with iPod despite several attempts

    Hello everybody
    I have a tricky problem with iTunes. I have used it and iPod nano for couple of years flawlessy, but now iTunes 8.2.1 throws a following error message (when connecting iPod to usb-port):
    "The software required for communicating with the ipod is not installed correctly."
    "Please reinstall iTunes."
    Then I surfed to Apple-homesite and did as two support article said:
    http://www.apple.com/support/ipod/five_rs/nano/
    http://support.apple.com/kb/TS1363
    But the same problem still bothers. I have tried even with older iTunes (6 and 7), but same error appears. Could my iPod be broken? It is weird, that Windows XP will found iPod normally and shows it as removable harddisk in My Computer.
    The iPod is out of warranty (due to it age), so I quess Apple won't care about problems anymore.

    Problem solved. The harddisk was formatted and Windows and iTunes re-installed. Hopefully this problem won't appear very soon.

  • IPad (iOS7.0.3) sync to desktop iTunes won't work with wifi ... Only wired

    For some reason, my desktop itunes (11.1.2) doesn't connect to my iPad by WiFi (which it ALWAYS did in the past) so now I have to wire it up to update and sync..???   Another broken Apple feature?? Seems a lot like that other company that I thought I'd gotten away from.. :-(

    Hello DJKnutsen,
    Thank you for providing the details of the issue you are experiencing when syncing your iPad with iTunes over Wi-Fi.  I recommend following the steps in the article below for an issue like this:
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/TS4062
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Itunes won't work with 10.3.9

    I have tried everything that I have found posted - I have moved the apps for itunes to the Desktop - Moved the installer package to my desktop - Deleted preferences... HELP!!!! Thanks in advance...

    The fact that QuickTime doesn't work either is an important detail. If you haven't already, try reinstalling QuickTime. You can download it here:
    http://www.apple.com/quicktime/download/
    Make sure you get the correct version for your OS, Panther.
    If that doesn't fix the problem, boot from your 10.3 installer disk and run Disk Utility and have it verify the disk and permissions; have DU try to repair any errors it finds.
    If that still doesn't fix the problem, then I'd suggest an Archive and Install reinstallation of Mac OS X 10.3
    Good luck.

  • ICal Crashing after startup; iTunes won't work

    My problem is twofold:
    My iCal calender (desktop) crashes upon opening every time. I reinstalled Tiger (from "not for resale discs" supplied by Apple). It did not fix the crashing; I still can't use iCal. Now, iTunes won't work with this installation of Mac OSX.
    I deleted iCal and reinstalled the OS again and I have the same results. Coincidentally, this crash happened after I upgraded to the iPhone 3Gs.
    Can anyone help me?
    Cathy

    You will not lose your files. This may help:
    Solving MSVCR80 issue and Windows iTunes install issues.

  • 2-wire modems don't work with Apple?

    Never had an Internet problem until I moved 3 weeks ago.  Since then my 12 mbps signal drops constantly.  AT&T Uverse have been to my new house 20 days straight trying to fix it (their monitoring shows the signal drops [goes away] sometimes every 2 or 3 minutes, ever since they connected it 20 days ago).  They have rewired my house (new cat5e drops, everything from the street to the house to the RJ45), and also  redid fiber-to-copper-to-street from telephone poles.  (I don't know the technical terms, but that's the gist of it, as they explained it to me.)  The AT&T guy says 2-wire modems won't work with Apple computers, and that might be the actual cause of the problems.  I find that hard to understand, since I had the same modem also using Uverse at my old address, for four years, with no problems.  So they've added a Cisco router, creating a second wifi within my house.  Now I get steady signal with Cisco, but it's 3.4 mbps.
    I now am having problems streaming already-rented movies to my AppleTV.  The one I tried to watch tonight stops every 5 minutes or so and buffers for at least another 5 minutes each time.  That makes it tough to watch the movie.
    Does anybody know if this buffering issue is because of slow wifi?  Or is it related to wifi at all?  If not, what else could it be?  I started this movie about 2 hours ago, so I now have 22 hours left on the rental, and at this rate I'll be up all night trying to watch it.
    Thanks.

    I've used U-verse and the same 2-Wire modem for 4 years without any problems.  I am about 1800 feet from the VRAD (box, usually on a street corner, that connects the last mile copper to the fiber which goes to the CO).
    So you have to ask U-verse just how far are you from the VRAD. The service does degrade somewhat the further you are from the VRAD (limit about 3000 to 4000 feet) and of course the quality of the copper between you and the VRAD.
    Also, for questions like this, which are more U-vers problems than mac problems I suggest posting at the two primary U-verse forums:
    AT&T U-verse Forums
    Uverseusers.com

  • Apple Remote won't work with Logic

    I bought a new iMac (3.06 GHz Intel Core 2 Duo) and the Apple Remote won't work with Logic 8. It worked fine on my MacBook Pro.

    jazzmaniac, I did something by holding down two buttons on the remote for a few seconds. I guess that is called registering. But when I try to play a song file in Logic, Front Row pops up instead.
    I've searched the Internet and am finding little on this topic.

Maybe you are looking for

  • Connecting to desktop Java application from R/3

    I want to connect to a java application program in my desktop and return a parameter to R/3. I have installed Java connector and I want to call the java application from R/3 using Java connector. I was able to get few samples to setup the RFC destina

  • Re-Formatting Issue

    I put a "new" hard drive in my G4 Mac Mini, and when I boot holding the "alt" key, my Tiger disk, nor the hard drive comes up. I'm certain the CD & the HD are both good. Any suggestions? I'm sure there's something I'm missing. Thanx!

  • Problem in Interactive SALV : Urgent

    Hi all, I am developing an ALV report using SALV concepts.. My requirement is that when i select multiple rows of the ALV generated and if i click on a Use Command Button say 'Display' i need to show one more ALV with some fields of the previous ALV.

  • How to hide fields on Repetitive Area Footer on the last page?

    Hello, How can I avoid printing some fields on the last page, when this fields are on the Repetitive Area Footer, and the Repetitive Area Footer is defined to print on all the pages? I was hoping to do this with fileds linked to (ContinueNextPage) fi

  • Flash won't install on Mac 10.9.4.  Tried all troubleshooting I could find.

    Tried the direct downloads, tried cleaning the system and starting from scratch,  have re-started the computer multiple times, made sure that safari and all other browsers were closed before starting.  Gets to about 4 percent complete off of the dire