ITunes wont launch - just upgraded but running OS10.6.8 on my powerbook that I use for iTunes
alias for discussions: lolobacsi
iTunes wont launch now that I have upgraded it a short time ago. I am running OS10.6.8 on an older MacBookPro I use primarily for iTunes
What happens when you try? Error messages? Try re-installing it.
iTunes 11.2.2
Similar Messages
-
I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both
iForgot.com
-
My itunes wont go in?, every time I click into it it says that this copy of itunes is corrupted and to reinstal! does this mean i've lost all my apps and music?!
No, you media like apps and music should be OK. For the problem see:
Trouble installing iTunes or QuickTime for Windows -
even do i use the same apple id and password that i use for itunes.
Hi peacegraffiti,
Thank you for using Apple Support Communities.
I understand you are having difficulties restoring your new iPhone from a previous iCloud backup. The following article provides information to help restore from an iCloud backup.
Get help restoring from an iCloud backup - Apple Support
Cheers,
Jeff D. -
Is there a way to consolidate two different Apple ID's into one. I have an old Apple ID that I used for Itunes and a new one I used to set up on my iphone.
You cannot merge accounts.
Why did you start a new account? -
HELP Itunes wont launch after upgrading
I downloaded the latest Itunes, and then tried to launch it.
I keep getting the following message
"error getting file security :\C\program files\get last error 5
I have even tried to remove I tunes through the add & remove section in the control panel, but this also does not allow me to do this and i get the same message.
Can someone help ???I just bought a new iPod Nano and installed iTunes 7.02 sucessfully and it wont launch at all...it simply sits there.
some preliminary questions.
are you getting an error message? if so, what does it say? include error message numbers if you're getting any.
or are you getting no error messages whatsoever when you try to launch itunes?
if you're getting no error messages whatsoever, do you just see the wee hourglass for a few seconds, and then nothing? if so, do you also have Norton Internet Security 2005 installed on that PC?
also, reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds? -
As I said I have two iCloud accounts, both do different things, i.e. my original iTunes account has all my app's and music etc, and then also the account which was set up for me when I set up a 'mobile me' account has all my calendars, contacts, settings etc, how can I merge these or even easily set my settings etc to go to my older iTunes account, I have tried to set up family sharing and all I can share is my calendars not my apps because they are with another iTunes account.
I am also a little concerned that my fire vault has just set its self up using the mobile me account, if I was to get rid of an account I imagine this would be the easiest one to ditch then what would happen to all my encrypted data?
Many thanks for your help.
NIKI am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.
-
Itunes wont launch, no error message, no blue screens, just wont open
itunes wont launch, i get no error message, no blue screen, it just wont open. I've tried to delete and reinstall, but once i close itunes i still have same issue. it wont open again.
I have same problem on my XP lap top and Windows 7 PC. Apple have been investigating this problem for me for a week now without success so far. Understand it 's ongoing with other customers as well.
It is caused by an bit of program called APSDaemon supplied by Apple in latest i-Tunes. Your quick fix to enable you to open i-Tunes again is as follows:- open Task Manager (right click bottom toolbar), click on Task Manager, select Processes. Find APSDaemon, highlight and press END PROCESS. I-tunes will now re-open ok. You have to repeat this every time you want i-Tunes re-opened until you switchoff or restart.
A pain I know, but lets you keep going until Apple repair and release an update for i-Tunes -
my itunes wont launch
I get this message
This version of iTunes has not been correctly localized for the language, please run the english version.
I click OK and nothing happensHi there Scottielongdrive,
You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
-Griff W. -
my ipod nano4th gen will not download the purchased songs in itunes v11. Just upgraded to mac 10.6.8-won't synch new songs since this upgrade. The ipod is seen in the itunes as the devise, and the nano screens says synching when plugged into the macmini usb port, but the itunes window does not say it is synching like it has before so whats the culprit? Techno virgin in distress!
PS - I added an iphone5 which is whay these upgrades happened so this synching to the ipod error is since the iphone began synching.I just learn in some post that the most common lapses in syncing is not checking if "sync music" in music section of the ipod is ticked. So double check if it is. Cheers!
-
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
I just installed MacOS X Yosemite on my MacBook Air 2011. After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes. How do I fix this problem?
If you use a trackpad and don't want to switch to a mouse, you can uninstall and reinstall all day long and will still have problems, but if you really want to try it, you can download PSE 12 here:
Download Photoshop Elements products | 12, 11, 10 -
HT5538 We have 4 Iphones and one Apple id (used for ITunes). Since upgrading IOS to 6,
We have 4 Iphones and one Apple id (used for ITunes). Since upgrading to IOS 6 on my phone, I now receive ALL the text messages destined to the others! What should I do to get back to "normal", without opting out of Imessages or FaceTime?
I'm afraid I may abuse of your generosity here, but I do have another question (that's the reason for the mistaken category of the post you answered). My daughter just arrived in her International Student residence in Europe yesterday, where internet's only available by Ethernet. She wishes to reverse-tether, from her PowerBook to her Iphone (because of the cost of using Internet on her phone over there). I found some instructions about Internet Sharing, in System Prefs, etc. "From: Ethernet, To: Airport" Enable Internet Sharing, and all...She did everything, by the book (or so, she thinks) but nothing shows on her Iphone Wi-Fi Settings when she tries to connect... I also read that it could be done with a Bluetooth PAN, but I got lost, as I tried to follow the instructions here at home, after pairing computer and Phone, with a "rude" message appearing on my phone telling me to "forget that device". Can you help?
-
My Itunes wont open - reading error "cannot be read because it was created by a newer verdion of itunes"
should i uninstall/ reinstal.
will i loose all my music nd playlists?This technique should work...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?
Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.
Maybe you are looking for
-
Web Gallery Template Font Size Adjustment
When I am in the Web module and using one of the templates (Flash or HTML), I would like to be able to adjust the font size of all the text used for the titles, headings, captions, etc. In general, I find the default font sizes too small, especially
-
HI What is the general ledger report t/code, to see the all the line items what we have been posted from 1st Feb to 31st march 2009. Regards, Prabhakar
-
Help With TLF Text Fields and UI Scrollbar
I've been trying to get one scrollbar to work with three TLF text fields. They are alligned from top to bottom like a column. It would seem better to just make one text field but because there are graphic symbols in the way that block the text, I mad
-
How can I get the audio to play? When I open a multitrack project Im working on I am getting this error message: "Soundtrack Pro is dropping audio because your computer's hard disk cannot deliver all the audio in time. Try removing some long files or
-
Can Java Socket listen from VB?
I have a program that first writes some data on output stream on socket , on which VB program is listening..and then it try to read from input stream what VB program would write back. Everytime I write the data , it doesnt throw any exception at that