Itunes wont load due to java scriptcore.dll what do i do, itunes wont load due to java scriptcore.dll what do i do
Suddenly itunes stopped loading. I uninstalled it and tried to reinstall it but it wont load saying the Java sript core.dll is not valid. What do i do to fix this? And will i be able to get my downloads back?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever
Similar Messages
-
hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!
kaylsk1 wrote:
udated and its on 10.6.8 yet still no change
Your signature in 1st post was 10.8.2.
You went backwards?
Did you reformat and reinstall when you first purchased it?
If not I HIGHLY recommend you do that before you do anything else. -
when I try to load a new version of itunes on my windows XP pc I get a message that file MSVCR80.dll is missing as well as a windows error 126 message.
any idea what to do?Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
I get an errot mesage saying MSVCR80.dll is missing so my itunes wont open??
I installed a new version of iTUNEs onto my PC and now I cannot open it - I get the MSVC80.dll has not installed message.
Howdy Webbedfoot,
It sounds like you are unable to open iTunes after a recent update. I suggest the troubleshooting steps from the article named:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Every time I try to run iTunes I get an error message sayinh: An application has made an attempt to load the C runtime incorrectly. What does this mean
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
After updating itunes on my pc, I get the error message "MSVCR80.dll is missing." Reinstalling itunes does not help.
MSVCR is Microsoft Virtual Creator. It's an MS dirivitive of Java.
Try running Windows Update, and see: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ msvcr80dll-problem/e5e1ae2f-f109-4bde-af20-ebcb7244fb5c
for more info. -
im trying to update to newest ios version. but during the proccess, an unknown error accured, now the device wont do anything, just shows the plug into itunes screen. the device does not show in windows or itunes. the iphone wont do anything. i tried restarting, it shuts off and back on, but only shows plug into itunes thing. any ideas?
From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod? -
reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano -
My iPhone 4 died. I tried charging it for 3 hours; it wont hard reset or even show up on my computer or itunes. is there anything i can do?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
You can also try going to Settings>General>Reset>Ease all content and Settings. However, you may not be able to restore via iTunes. You might only be able to only restore from iCloud backup if you have a hardware problem, -
My iphone 4s wont sync when I connect it to the pc( not apple). It is connected as it comes up on itunes but when I try to sync it with apps/ music etc it wont. I am doing something wrong or is it a mistake with the phone. I am still able to download apps and music from itunes on my phone though.
I already restored it but that didn't help.
TIA for any replies.iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
Hi, I’ve recently bought an iPad2 and can’t get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading.
Apparently it is not an issue with wifi since Safari, You Tube and Maps work well, I’ve tried some of the tips, e.g. log off/on my Id, change password but no one worked.
Your help will be highly appreciated.
Thank you.
Luis.Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
OS is Windows7. I'm using the latest version of Mozilla Firefox
I am unable to load some web pages, I get an error message saying unable to load page due to invalid or unsupported form of compression, this happens on the BBC news page for example. Any ideas how to overcome???Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies" -
I tried to update to the most recent version of itunes but the update failed. Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing. I tried uninstalling and reinstalling itunes but I grt the same message. What can I do to fix this?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
after clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading". i turned computer off thinking something was wrong. now itunes won't open at all. do i need to download itunes again?
Did you actually download the installer from Apple or did you use Software Update. You can download the installer http://www.apple.com/itunes/download/
Maybe I'm old fashioned but I would consider repairing permissions first using Disk Utility because something caused this to go wrong the first time. And of course make a backup of your whole library first. It shouldn't happen but some have complained about their libraries being wiped out by iTunes updates. Better safe... -
I have an older version of itunes stuck on my computer and because of an apparent pathway missing it wont let me uninstall and reinstall the newer itunes....anyone know how to fix this issue?
What's the precise text of that message please, jeremy? (There's a few different ones I can think of that you might be getting.)
-
I am not able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. An error code will pop up notified me that "my Ipod cannot convert some of the file" How can I fix that?
Hi there mayway3000,
You may find the troubleshooting steps in the article below helpful.
iPod does not play content purchased from the iTunes Store
http://support.apple.com/kb/TS1510
-Griff W.
Maybe you are looking for
-
Cisco TCS "the overview for this server cannot be found"
Hi, I have a problem on my TCS server, a message is displayed "The overview for this server can not be found" This error message appears when I last reinstalling the usb image provided by Cisco, Thank's Billel
-
Unable to Install Framemaker 10 on Windows 7
I am trying to install Framemaker 10 (x64) on a Windows 7 computer. I have already uninstalled my previous Framemaker 7 version. Even after that i could notice the following error messages in the log file. Collected advanced path check information fo
-
Need Help with Transporting Playlists Back to I-Tunes
If anyone can help with this issue, I would really appreciate it. Here's my situation: After many long hours organizing my playlists on I-Tunes, my pc malfunctioned and I needed a complete software overhaul. Therefore, I have had to reinstall all sof
-
How to create a photo preview album DVD in DVDStudio Pro ?
Hi, How can i create a DVD still image ( Photo ) preview with DVDStudio Pro ? The preview should allow the viewer to go back and forth between images in addition to pause and go back to index gallery with the remote control. The final result should b
-
Putaway in storage section PA1 is not allowed
Hello, While creating TO against TR in LT04 system is giving error message as above said in subject line. I have checked in LX20 and LS04 bins are there even though still getting same error. Please let me know what could be the reasion and solution