ITunes wont load Help Please Quick time now not working

AppName: itunes.exe AppVer: 7.6.2.9 ModName: unknown
ModVer: 0.0.0.0 Offset: 61707369
Tjis is the error I get. I have tried unenstalling using Unenstaller Pro also tried installing older version of Quik time still no joy same message.
Please help very frustrated I am not a computer wiz I just want to use the new nano.

What error message do you get when you try to launch your QuickTime, 2 dads?
You said you tried using an uninstaller package ... where you getting an error message if you tried to uninstall it using the Add/Remove programs control panel? If so, what did the uninstall error message say?

Similar Messages

Quick time does not work on win7. What do I do?

quick time does not work on win7. What do I do?

Mine works fine with both my iPad and my iPod Touch. Been using it for two years. I recently replaced it with an Apple TV.

My itunes wont load up on my computer? ity worked fine last time

i tried to start Itunes on my computer it wont load up?

Like I said:
Connect the iPod to the computer and make a backup by right clicking on the iPOd under Devices in iTunes and select Back Up. When you right click a menua comes up and you select Backup.
To restore see:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
Before you restore just make sure that all yur synced items like music and video synced to the iPOd are on the computer since those items are not in the backup. For what is in the backup see:
iTunes: About iOS backups

Quick Time Pro not working - Video to iPod

I have not been able to copy video to my new iPod using Quick Time Pro
In this case this is a MPEG-4 to the Quick Time Movie format( MOV )
I have followed the tutorial of exporting this MPEG to the iPod( 320X240 ) format.
The exported file plays well on iTunes but when I synchronize the iPod I get a message that the file format cannot be played on the iPod and a Help-Link back to the same tutorial
I even tried converting a MPEG-1 and MPEG-2, with the same results.
Help & advise appreciated !
Thanks,

Did you check Window - Movie properties before converting?
QuickTime requires seperate video and audio tracks in order to produce a file for the iPod with both video and audio.
If the MPEG-2 you are trying to convert is muxed it will only take the video part of the muxed track.
http://docs.info.apple.com/article.html?artnum=302588
I have put together a tutorial for using QuickTime to convert DVD to iPod which contains further details:
sehested, "Tutorial: How to get DVD's on your iPod", 12:50pm Nov 8, 2005 CDT

Quick time player not working

I've not long upgraded my Mac to snow leopard, everything is working fine apart from quick time player.
I'll click on the logo to open the player but nothing loads/opens or appears on the screen... however the top left hand corner shows its open and a allows me to close QTP.
Does anyone know how to correct the problem?

I'll click on the logo to open the player but nothing loads/opens or appears on the screen... however the top left hand corner shows its open and a allows me to close QTP.
If by "click on the logo" yor are referring to the QT Player Finder icon, then it sounds as if the application is functioning correctly.
Does anyone know how to correct the problem?
A movie/audio clip will only auto-load if you double-click on the Finder movie/audio file icon—not the application icon. However, once the application is open, you can open a file (or URL) from within the QT Player app by using the appropriate File menu options.

Mew...Help please sister's ipod not working!

Mine of course if fine but hers seems to just turn on and then the green light stays on and won't go off. I think I have tried to reset it but it does nothing. The computer recognizes and downloads songs onto the ipod but will just not unfreeze off of the freaking green light. If you know the answer please tell me!

Sorry, I don't have a solution, but I have the same problem. I have songs downloaded onto itunes and it plays, and it shows I have songs on my ipod, but when I take my ipod off the computer and turn it on nothing happens. All I see is the green light. It's so weird because it worked before I deleted all my old songs and put new ones on it, and now it doesn't. I think my problem is that I should buy songs from the itunes store instead of downloading them off of mp3 sites, I don't know what to say about yours...Does my problem sound like yours??? Sorry if I couldn't help.

Help Please? Flash Player not working, windows 7 32 bit IE.

Hi. I cannot get the Flash player to play content in Internet Explorer 32 bit. I am extremely frustrated. My info is:
Windows 7/64 bit
All windows updates are current
Dell studio 1749 Lap top
IE 8 32 bit
IE 8 64 bit
32 bit Flash Player 10.1.85.3
64 bit flash player "square" 10.2.161.22
windows firewall
High speed cable with wireless router
Avast antivirus free 5.0.677
I have spent several days reading this forum as well as other forums on the same subject and have tried many many suggestions that have been posted without results. I have checked my user account settings, mine is set to administrator. I have checked and rechecked Internet explorer internet option settings and tried them all including none ( set to not recommended lowest settings) for all the zones. I have reset internet explorer settings under the advanced tab. I have tried to install the flash player many times using both the auto install from the browser window as well as the manual download and install program from your web site many times. I have uninstalled from windows control panel and also using your manual uninstall program between each reinstall attempt.
I have restarted both my computer and internet explorer after each install and uninstall so many times I can't count. There are many other things I have tried as per some of the things I have read but so far no success. The interesting thing i find is while trying to fix this problem i downloaded the flash player code named "square" 64 bit and it works perfectly using Internet explorer 64 bit.
Internet explorere Adobe add ons are:
In IE 32 bit add ons listed are;
shockwave activeX control - enabled
get_atlcom Class - enabled
In IE 64 bit add ons listed are;
shockwave flash object - enabled
Files installed on my harddrive are;
in windows/sysWOW64/macromed/flash
Flash10k.ocx
Flashinstall.log
Flashutil10k_activeX.dll
Flashutil10k_activeX.exe
in windows/system32/macromed/flash
Flash64_10_2_161.ocx
Flashinstall.log
Flashutil64_10_2_161_activeX.dll
Flashutil64_10_2_161_activeX.exe
I hope you are able to assist me in fixing this problem.
Thanks

Good Morning.
I can not get the batch file to create a log file. Anyway the general message throughout the entire batch file report is that nothing succeded. Each time it tried to create a reg key the resulting message is :
Regsetsecurity error : 5 access is denied
When trying to reset FP security permissions:
Set security privilage : access is denied
Warning :unable to SeSecurityPrivilage privilage. This privilage may be required.
Then when it tries to create file "macromed" error is
Createfile error : 1314 A required privilage is not held by the client
Anyway this gives you a general idea of what has happened running the batch file,
I am starting to think we are spending far to much time on this ,but I enjoy the challange to correct the problem.
If this is due to a corruption or some such thing in the registry I could have reformatted and reinstalled My system complete in less than a day. This is the fourth day on this.
If the User Accounts list me as the administrator and there are no other accounts how can I not have the required permissions?

Ref: Time machine not working

I have a question. Can I use TM to reset my System Preferences. In hope it would put back what changed back in Nov.
I cannot accesses any files in TM and no error message from TM. Please read Time machine not working posted 19 April. Many thanks.

You need to explain just what you mean "not working".
Also, what are you backing-up to?
Check out some of the threads under More Like This at the right of this page.

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

TS3694 i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

From the article which you posted your question from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Have Vista, loaded new version of iTunesn now have DEP issue and iTunes wont load. Is there a way to download on old compatable 9.0 version or is there a Dep fix

Have old PC with Vista, loaded new version of iTune now I have DEP issue and iTunes wont load. Is there a way to download on old compatable 9.0 version of iTunes or is there a workable Dep fix?

You'll get a variety of earlier versions of iTunes here: Old iTunes for Mac

Itunes Wont Load. [Major Quicktime Error]

My Itunes wont load.
Its saying a quitime error.
Exact Message-
"Quicktime failed to initialize. (Error -2096)
Quicktime is required to run itunes. Please reinstall itunes"
Ive download itunes four times, and quicktime three times.
I have no idea what to do.
Help?
*Edit-Also, when im on quicktime, and i click an itunes icon to launch it, it even says i dont have quicktime.
Please help people.
Message was edited by: Rawwrz
Message was edited by: Rawwrz

+"Quicktime failed to initialize. (Error -2096)+
+Quicktime is required to run itunes. Please reinstall itunes"+
Even though you're getting a different error message, try heading into the iTunes compatibility tab, as per the following document. (Make sure that none of the boxes in there are checked ... having any box in there checked, not just the compatibility mode box itself, can cause problems.)
iTunes for Windows: How to turn off Compatibility Mode
Does that help with the iTunes launch?

HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes

please help my ipad min is not working on the scren it says iPad disabled connect to itunes

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I can't get quick time player to work, keeps teeling me i need plug in,'i have the latest player . can anyone help

I can't get my quick time player to work, it tells me i need a plug in, but I have the latest software

Hei Carolina
Just want to tell u that i got help now, and everything is fine. Maybe u should try to give them more information about the following:
When asking questions or reporting Flash Player problems, please do:
specify your operating system (including 32bit or 64bit);
specify your web browser and version (including 32bit or 64bit);
specify your Flash Player version (check http://kb2.adobe.com/cps/155/tn_15507.html);
You may have to wait longer for an answer if you do not follow these requests, or you may not get any answer at all.

Quick Time will not play HD movies from itunes

When i'm on the road with my computer I like to be able to play my HD movies without having to open Itunes. So i use Quick Time. But with the HD movies I buy from Itunes this does not work. When I try and play the HD movies on Quick Time, the movie acts like it's playing but the screen is gray. The bar on the bottom displaying the time for the movie is going, but there is no video or audio.
Is this a problem with authorization or something?

I have the same problem,i have sync it to my computer and there is no problem to see it but on my iphone 4s can't find it,please help or I just never gonna buy movies from Itunes,i mean why is itunes so difficult to use?

ITunes wont load Help Please Quick time now not working

Similar Messages

Maybe you are looking for