ITunes wont open and wont install or update!! Need help!!
Everytime I try to open my itunes I get a pop-up saying
"QuickTime version 7.0d0 is installed, iTunes requires QuickTime version 7.1.3 or later.
Please reinstall iTunes."
This message also appears whenever I try to update my itunes or reinstall it. Can someone please help me??
bumped
Similar Messages
-
I have 11 software updates. The machine says in need to retart to install. I am in an infinite loop where it just keeps restarting and never installing the updates. Help!
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk. -
Itunes wont install properly? please help!!
hello,
iTunes is being very difficult atm! reinstalled the iTunes software and the error message comes 'iTunes wont install properly...'.
I have run a diagnostics test and hoping someone can point in the direction of how to fix it! cannot even connect my iphone device to it.
please help!
thanksFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Ipod touch will not let me sign in itunes and wont let me update need help
need help
What happens when you try to sign into iTunes?
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.5 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 7. Requires iTunes 11.1 or later if you update via iTunes
Identifying iPod models -
I need Help! i tried syncing my ipod then it said i neededthe nwer version of itunes so i downloaded it like 8 times! it still didnt work so i uninstalled it and it wont download at all when i try a window willl pop up and say would you like to save this file? and i will click save file and it would download but its nowhere on my computer?!?!
Hi DJBentley2011,
Welcome to Apple Support Communities.
It sounds like there is an issue burning CD's in iTunes. Is the playback issue only occurring on a specific device and does the disc show up correctly in iTunes? The article linked below should help you resolve optical drive issues, it walks you through identifying potential issues and provides troubleshooting suggestions.
iTunes for Windows: iTunes Diagnostics, CD/DVD Drive Tests
http://support.apple.com/kb/HT1567
I hope this helps.
-Jason -
Itunes wont install!! please help!!!!! gettin very annoyed !
Okay so I have an HP windows 8 laptop and I've tried downloading itunes like 10 times and still nothing!! Everytime it downloads and gets ready to install I get a "error 2" message saying "Apple application support was not found" "Apple application support is required to run itunes. Please uninstall itunes and then install itunes again. thank you" I've uninstalled it and re installed it soo many times and im getting very annoyed ! I just want to download it. And im not a computer wiz so when i googled the problem it didn't really help much. Please Please help!!! Thank yOU
PLEASSE !! omg i have been trying to download itunes for the past 2 days and i cant figure it out !!
-
ITunes wont install using update or manual download! HELP!
having major problems with my iTunes. i currently have 16 videos trying to download and i keep getting error messages everytime. contacted iTunes support and they said i needed to update to the latest version of iTunes. When i then told them that it won't let me they suggested downloading onto a different system! hugely useful! the problem i am getting with updating iTunes is that if i use the Apple Update it comes up with an error saying "failed to install try downloading manually" so i do! download the installer files manually and then double click on it as usual. the installer check comes up and i click on run. then nothing happens! the run box dissapears but nothing installs and nothing else comes up in its place! highly annoying as you can imagine! anybody any ideas on how to fix this so i can finally watch my 16 shows!
the fix microsoft suggested didnt work. the windows installer comes up fine:
Windows ® Installer. V 3.01.4001.5512
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group. -
Iphone apps wont install or update - please help!
Hi. Hopefully someone can help me...
My iPhone 4s running iOS 6.1.3 wont let me install new apps or update existing apps. When i click on the button to buy a free or pay app the button changes to "install app". Then when i click on the install app button nothing happens ( no progress bar and no installation). After repeatedly clicking the install button the status changes to "install" as if it was installed...except it wasn't.
So far i've tried:
- logging out/in of iTunes account
- rebooting phone
- turning off / turning on phone
- resetting all settings
- deleting apps that required updating that wouldn't update
- deleting ibooks which had a pending download
Tried these multiple times without success in resolving the issue. Both wifi and 3G connection is fine.
Anyone gone through the same thing and have any suggestions? Help would be very much appreciated. Thanks
SHi, Use the Administrator account. Download the Uninstaller and SAVE it to your Desktop:
http://kb2.adobe.com/cps/141/tn_14157.html
Then download the Flash Player Installer for Firefox and SAVE it to your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe
Then downlad the Flash Player Installer for Internet Explorer and SAVE it to your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
Be sure to read over the Uninstaller instructions for system tray, and Make sure you use the Administrator Account.
When you have that done, Close ALL browsers. Run the Uninstaller and when finished, Reboot(restart) your computer.
When fully rebooted, Reboot again (to clear all old files out)
Then Run the Firefox Installer, then Run the IE Installer and when finished, Reboot Once.
Test both browsers here: http://www.adobe.com/software/flash/about/
Then Using IE, go to manage add ons (all add ons) and find Shockwave Flash Object and make sure it is Enabled.
Then Using FF, find the SWF vs 10.1.53.64 plug-in and make sure it is Enabled.
If you have any questions, just post.
Thanks,
eidnolb
Note: If you don't want Flash Player in IE, then ignore that link.
I would wait and Install Reader after a fix has been released. -
My itunes wont install plz i need emmediate help
ok so i have a windows xp with multiple accounts, only one of those accounts is the administrator. when i download itunes everything goes smoothy until this happens: http://img80.imageshack.us/img80/5131/itunesre3.png
im really ****** because i just got my ipod nano. i mean theres only one administrator so y cant it download it or access that key thingy.
PLZ HELP!Apple offer this help:
http://docs.info.apple.com/article.html?artnum=304546
You need to install iTunes from an administator account, if you have a previous installation installed on another account, it is worth trying to install from there.
If none of that works, there may be a problem with your registry permissions, which can be fixed but lets go for a simple solution first. -
Itunes wont play my music - need help
I just downloaded and installed the new version that has this Genius garbage on it. Ever since I did that my Itunes will not play any music off of my Ipod. I have the 30 gb classic version. Now it plays on my home computer where the Itunes is syncd at, however it just wont play on my work laptop. I run Xp. Heres the thing... it recognizes my ipod, brings up my 'name' for it, shows all the songs and all the movies. It just wont let me play any of them. It wont let me select any to move into playlists. Its like Im looking at a pdf or something. Help!
nevermind. Lock it up. Figured it out. I had to put Manually Manage Music on in order to play anything or create playlists. It got turned off when I installed the new version
-
Itunes wont verify adress. Need help asap!
hey guys,
I keep trying to but an album, Bob Dylan blood on the tracks. But every time I try to purchase it it says " We could'nt verify your address...blah blah blah. Even though it is all right. And I kind of need to get these becasue I am going on a 7 hour plane trip, in about 6 hours.
Thanks,
dylan!See if this works...
From the iTunes menu bar click iTunes / Preferences then select the Advanced tab.
Click: Reset warnings & Reset cache.
Restart your computer. -
ITunes not working after 10.5.2 update, Need help!!!
After i updated to leopard.2 (10.5.2) whenever i try to open itunes this message apperars:
+The iTunes Library file is locked, on a locked disk, or you do not have write permissions for this file.+
so i cant use iTunes, iv tried changing the permissions with about everything having to do with iTunes and i changed the permissions on the Hard drive, and iv also repaired disk permissions, can anyone help me please?Well it's been a few days & now my keyboard is acting up again. I'm working away when it becomes unresponsive. Sometimes it gets stuck like I'm pressing down on the track pad & it just draws that white box. I then have to restart my computer. SO All is not yet well. I saw other posts regarding similar issues & no I don't have any 3rd party keyboard plug-ins. Please read my first post for a complete breakdown on what's going on.
Thanks -
Pix and Videos gone after update - need help please.
Hi all,
I upgraded to the new OS2 and loved it... no problems there. When I tried to connect and pull pictures off via my PC, I got a message Blackberry Desktop software could not connect. I tried it multiple times after restarting the Playbook but would not connect. It connected and advised I needed to upgrade my software which I did, but when I started the Playbook after the install it was like it was brandnew out of the box. Had to go through the tutorial and then I was shocked to find all my pictures and videos were gone. I don'r care about the videos but had some really important (to me at least) pictures I wanted off of it.
Sooooo.... any chance of recovering those or does the updates just "Blow" everything away? I will never use my Playbook to take any pictures or video of anything again and guess I learned a painful lesson.
Thanks for ANY input you might be able to provide.Same thing happened to me. RIM <Inappropriate Content Removed>
this one up. -
Help pls!
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
iTunes wont install. It says "The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked. Help!!!!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683) -
HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?
Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix.
Maybe you are looking for
-
Android Adobe reader don't open pdf Hyperlink
Hi all, i'm trying to develop an android application, and i would like to know why the adobe reader don't recognize the hyperlink in a pdf file... I would like to know if my settings are wrong or the adobe reader application does not support that fea
-
How can I sort multiple forms in Acrobat X (Mac)?
Okay, I am working on a form that has over 300 (336 to be exact) forms in it, so dragging and dropping one at a time is really time consuming. I was wondering if there was a way to drag multiple forms (Shift Click or Cmd Click several, then arrange t
-
Dynadock Universal USB 3.0 Docking Station: no autoconnect of USB-HDD after Win8 power-up
Hello, I've recently obtained a Dell XPS-12 which only has a SSD-HDD. In order to overcome the limitations in terms of available connections I bought a Dynadock which works fine so far. I want to use the Dynadock in a configuration where it is the on
-
Using AGG/CALC DIM function in the BSO target cube of Transparent Partition
Hi, Is it possible to use AGG("dimension") on a dimnesion in the BSO cube that is a target cube for a BSO-BSO Transparent Partition/ I have created the partition area with 3 dimensions, one being 'Source'. 90% of the source members are being refrence
-
Best hard drives for backing up macbook pro?
What is the best harddrive for backing up my macbook pro?