Itunes wont read music unless CD or ipod is connected

I just switched my ipod library over from my mothers computer to my own PC and now itunes wont let me play my music unless the ipod is plugged it. It also wont play the cds i had on recovery disks unless the disk is in.
I get a message that says...
"The song....could not be used because the original file could not be found. Would you like to locate it?"
Anyone know what I can do? I'm pretty dumb when it comes to computers too so if you have any suggestions if you could explain things to their full extent that would be nice. Thank you.

Hi Kelly007
you have to copy the music files to your music folder on your computer and then import them from there to iTunes

Similar Messages

Itunes wont sync music to iphone or ipod

Itunes is updated fully
Iphone updated
I try my normal gig of goig to file, add file to library and select all my songs i want and hit ok. I then hit the sync button. There use to be a autofill button at the bottom right corner but i dont know where it went.
Also this is a brand new computer. Just downloaded itunes. I got 4 mp3s on the other day but now it wont work.
Please helps!

Hello Saajuk,
The following article details how to enable Autofill for your device in iTunes 11.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
All the best,
Allen

My itunes wont sync music onto ipod

itunes wont sync music onto ipod because the file/disk could not be read or written...help me pleasee i just want my music onto ipod.. all the music is still on my itunes and i have like 300 songs but its wont go onto my ipod!!!!

You can only drag and drop if you have iTunes configured to manually manage music. With the iPod connected to the compute go to the Summary pane for the iPod and check the box under Options that says sync only checked songs and videos.

My itunes wont sync music to my ipod touch:(

my itunes wont add music to my ipod it will sync and back up ect.... but when it comes to adding the music on it, it does and says its " copying 1 of 1; bob marley - jamming" then does nothink and stays at that, the loading bar doesn't even move either. can somone please help me i would be very greatful if you do.

Hi,
Have a Look at this Support Article for your Error Code...
http://support.apple.com/kb/TS2830
Cheers,

HT1476 i just goyt my ipod touch 5th generation three days ago and left it in my bed with my screen down and itunes wont read it and it wont charge what do i do??? please help me

i just goyt my ipod touch 5th generation three days ago and left it in my bed with my screen down and itunes wont read it and it wont charge what do i do??? please help me

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When connecting my 120GB iPod Classic I receive the prompt; iTunes cannot read the contents of the iPod "Name". It asks me to reset it. All my music appears to have been erased iPod yet 41GB of data is on it. Help!

When connecting my 120GB iPod Classic I receive the prompt; iTunes cannot read the contents of the iPod "Name". It asks me to reset it. If I do this I will lose the contents of the iPod. The iPod shows no music on it yet 41GB of data is on it under "About" on the iPOD itself. It would appear that the music files are still there. I don't want to reset the iPod as it will mean reloading a significant amount of music i.e. my entire CD collection. Any suggestions? Has my iPod died?

(I'll lose all my music right?)
That is correct. A restore wipes all content from the device, resets all settings back to their defaults, and loads a fresh copy of the iPod's software onto the device.
See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
After all the music is safely in iTunes again, go ahead and restore the iPod to factory settings as it says.
B-rock

First It wouldn't sync, Now iTunes wont read it.

My iPod was fine until I reformatted my computer. Then I plugged it in and tried to add some songs on it. It wanted to restore it so I did. I kept getting an error ever ytime It would start to sync, saying Windows - Delayed write failed and said a bunch of other stuff with it. I kept trying over and over, I even tried putting the music on manually but it kept popping up. Now when I plug it in iTunes wont read it, but My Computer reads it, and an autoplay pops up and starts going through my songs but it never recognizes the iPod.

If you got the standard "stub" download, could you try the "full" installer. You can get that from the following page (scroll down to your preferred language):
https://www.mozilla.org/firefox/all/
I think in an earlier thread it was reported that Firefox installers include decompression technology from 7-zip. Is Windows reporting or recording any error involving 7-zip?

Itunes wont read iphone, thinks it's a digital camera...help

I dont know what happened, but when I first got my PC with vista 64, and had itunes installed with the iphone, everything worked. 3 days ago I reformatted my drives and reinstall windows and all my programs. I got itunes working with all my music and whatnot, but when I plug my iphone in to toss music on it, itunes wont read it. Windows knows it's there, but everytime I plug it in, the lower right hand corner the "windows is installing new driver blah blah" pops up, and then get an error message saying it couldnt install the driver. I go to device manager and windows thinks it's a digital camera. I did the whole update driver with the "c:\windows\system32\drivestore\usbaapl_" thing, and I got this message:
Windows found driver software for your device but encountered an error while attempting to install it.
(usb icon) Apple Mobile Device USB Driver
The system cannot find the file specified."
I have been googling the crap out of this and I am at wit's end with this. I've uninstalled/reinstalled itunes, cleaned registry, wiped all apple programs from the PC, anything google told me to, hahaha. Serious, I cant find any forum or web article to help me past this point. Please help...

I think I got it. I've had the same problem as you and many others. I went to device manager and found iPhone under imaging devices. Here's what I did:
Right-click -> properties -> driver tab -> update drivers (launches Hardware Update Wizard) select...
No, not this time (next) Install from a list ... (next) Don't search ... (next) Now there should be two choices under model. Select the Apple Mobile Device. This is not digitally signed so you'll get warnings but continue. When I did this iTunes picked up my iPhone right away.

"iTunes cannot read the contents of the ipod", How can I fix this?

Hello everyone, I am having trouble with my iPod touch 32GB and getting iTunes to detect it. I'm using Windows 7.
When plugging it in tonight, I got the message "iTunes cannot read the contents of the iPod (Name). Go to the summary tab in the iPod preferences and click restore to restore this iPod to factory settings". I attemped to do this, but I then got an iTunes error "3184" and was unable to install the iPod software.
I've tried...
- Using a different computer
- Using a different USB cable
- Rebooting the iPod
Nothing seems to work. I've read a solution as to delete one of the iTunes files on the iPod, but the iPod doesn't show up in my Windows Explorer, so I am unable to do this. The computer does however charge the battery when I have the iPod plugged in. I'm also able to still listen to music on the iPod as well.
One other note, I had the same thing happen to my previous iPod touch. I got my original iPod touch back in December 2010. In October 2011, the iPod just died one day and I was not able to turn it on at all or charge it. When I'd plug it into the computer, I got the exact same errors and was unable to restore the iPod. I sent it in to Apple as it was still under warrenty and they sent me a replacement. Now 3 months later it's happened again. Of course the warrenty starts from the day you purchase the original, so this is no longer under warrenty despite having it for only 3 months. The only difference this time is that the battery still charges and I can still turn it on and listen to music.
Any ideas?
Thanks

hi Angie!
hmmm. is there an Apple Store convenient where you can take the ipod for a check-up?
love, b

ITunes Reports "iTunes Cannot read the contents of the iPod...."

This morning I connected my 2 week old iPod Classic to my laptop via the USB cable and iTunes came up and displayed a message saying "iTunes cannot read the contents of the iPod MHAM'S IPOD". It suggested a restore, which I have not tried yet. I have faithfully used the "Eject" function in iTunes to disconnect. After reading some other posts in the forums, it appears that others are having a similar issue. I'm concerned that this is normal operating behavior for this product. Given that this is my first Apple brand purchase, I'm a little turned off to the brand. Does anyone have a suggestion that doesn't involve me wiping this thing clean and starting over? And is this something that I should just expect? I ran a diagnostic and the results are below.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Latitude D620
iTunes 7.4.3.1
iPodService 7.4.3.1 is currently running.
iTunesHelper 7.4.3.1 is currently running.
Current user is an administrator.
The current local date and time is 2007-10-16 07:04:02.
Connected Storage Devices:
Disk drive, Hitachi HTS541080G9SA00, Bus Type ATA, Bus Address [0,0]
Disk drive, Apple iPod USB Device, Bus Type USB
Disk drive, RIM BlackBerry SD USB Device, Bus Type USB
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No IEEE 1394 Host Controller found.
The iPod Service Logging Information:
[SERVICE: 0xF88,06:40:36 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Tue Oct 16 06:40:36 2007)
[SERVICE: 0xF88,06:40:36 INFO] ##### iPodService starting as a service, version: 7.4.3.1
[SERVICE: 0xFD0,06:40:36 INFO] Adding iTunesHelper to session 0
[SERVICE: 0xF98,06:40:36 INFO] Got signaled to go ahead... Starting device manager!
[SERVICE: 0x114,06:40:36 INFO] Listener Window created
[SERVICE: 0x114,06:40:57 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:41:40 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:44:25 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:48:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,06:57:13 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,06:57:13 INFO] device is an iPod
[SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x114,06:57:13 INFO] [-1] set waiting to mount = 1
[SERVICE: 0x114,06:57:13 INFO] [1] Assigning session 0
[SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x114,06:57:13 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x114,06:57:13 INFO] [1] added device number 2 to m_objDeviceNumberMap
[SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #0 from src #0
[SERVICE: 0xEC,06:57:13 INFO] [1] input #0
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #1 from src #0
[SERVICE: 0x11C,06:57:13 INFO] [1] input #1
[SERVICE: 0x114,06:57:13 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0x114,06:57:13 INFO] looking up device # for \\.\F:
[SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x114,06:57:13 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x114,06:57:13 INFO] [1] set waiting to mount = 0
[SERVICE: 0x114,06:57:13 INFO] [1] input #2 from src #0
[SERVICE: 0x128,06:57:13 INFO] [1] input #2
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #3 from src #0
[SERVICE: 0x118,06:57:13 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x118,06:57:13 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0x118,06:57:13 INFO] [1] set waiting to mount = 1
[SERVICE: 0x118,06:57:13 INFO] [1] input #4 from src #0
[SERVICE: 0xEC,06:57:13 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:57:14 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
[SERVICE: 0x128,06:57:14 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x128,06:57:14 INFO] [1] input #3
[SERVICE: 0xEC,06:57:14 INFO] [1] input #4
[SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
[SERVICE: 0x128,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 INPUT #4] - (HDW) Interface Arrival
[SERVICE: 0xEC,06:57:14 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
[SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xEC,06:57:14 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xEC,06:57:14 INFO] VendorId: Apple
[SERVICE: 0xEC,06:57:14 INFO] ProductId: iPod
[SERVICE: 0xEC,06:57:14 INFO] revision: 1.62
[SERVICE: 0xEC,06:57:14 INFO] vendor bytes:
[SERVICE: 0xEC,06:57:14 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
[SERVICE: 0xEC,06:57:14 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xEC,06:57:14 INFO] [1] Power State: Powered
[SERVICE: 0xEC,06:57:14 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xEC,06:57:14 ERROR] Did not find first letter of stage
[SERVICE: 0xEC,06:57:14 INFO] got HotPlugState 0
[SERVICE: 0xEC,06:57:14 INFO] [1] serial number 000A27001547056B
[SERVICE: 0xEC,06:57:14 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
[SERVICE: 0xEC,06:57:14 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x118,06:57:14 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0x118,06:57:14 INFO] [VolumeArrive] mask = 0x7C
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\G:
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\F:
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x118,06:57:14 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x118,06:57:14 INFO] [1] set waiting to mount = 0
[SERVICE: 0x118,06:57:14 INFO] [1] input #5 from src #0
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\E:
[SERVICE: 0x11C,06:57:14 INFO] [1] input #5
[SERVICE: 0x118,06:57:14 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\.\D:
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x0 partition 0x3
[SERVICE: 0x118,06:57:15 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 INPUT #5] - (HDW) Volume Mount
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x11C,06:57:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:15 ERROR] Did not find first letter of stage
[SERVICE: 0x11C,06:57:15 INFO] got HotPlugState 0
[SERVICE: 0x11C,06:57:19 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x11C,06:57:19 INFO] [1] ===== iPod with Video =====
[SERVICE: 0x11C,06:57:19 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:19 INFO] 6:57:19, year 2007, day of yr. 288, GMT offset -20 isDST 1
[SERVICE: 0x11C,06:57:19 INFO] [1] progress is now 0
[SERVICE: 0x11C,06:57:20 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x11C,06:57:20 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x11C,06:57:20 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
[SERVICE: 0xF90,06:57:21 INFO] Getting iTunesHelper for session 0
[SERVICE: 0xF90,06:57:21 INFO] launching iTunes.
[SERVICE: 0x90C,06:57:25 INFO] <0x4> Got Serial #
[SERVICE: 0x90C,06:57:25 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:57:25 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:57:25 INFO] Mounted
[SERVICE: 0xFD8,06:57:25 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:25 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:25 INFO] Mounted
[SERVICE: 0x90C,06:57:25 INFO] [1] already mounted!
[SERVICE: 0x90C,06:57:25 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x90C,06:57:26 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:57:26 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:57:26 INFO] Mounted
[SERVICE: 0xFD8,06:57:26 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:26 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:26 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0x90C,06:57:27 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:57:27 INFO] Mounted
[SERVICE: 0x90C,06:57:27 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:57:27 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:57:27 INFO] Mounted
[SERVICE: 0xFD8,06:57:27 INFO] [1] already mounted!
[SERVICE: 0xFD8,06:57:27 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,06:57:40 INFO] Mounted
[SERVICE: 0xFD8,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:40 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:57:40 INFO] Mounted
[SERVICE: 0x90C,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] <0x4> Got Serial #
[SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] Mounted
[SERVICE: 0x90C,06:58:19 INFO] [1] already mounted!
[SERVICE: 0x90C,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0x90C,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:58:19 INFO] Mounted
[SERVICE: 0x90C,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] [1] already mounted!
[SERVICE: 0xFD8,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,06:58:23 INFO] Mounted
[SERVICE: 0xFD8,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:23 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:58:23 INFO] Mounted
[SERVICE: 0x90C,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:58:26 INFO] [1] input #6 from src #4
[SERVICE: 0x128,06:58:26 INFO] [1] input #6
[SERVICE: 0x128,06:58:27 INFO] [MACHINE 1 INPUT #6] - (APP) Unmount
[SERVICE: 0x128,06:58:27 INFO] [1] Begin...
[SERVICE: 0x128,06:58:27 INFO] [1] Mounted state
[SERVICE: 0x128,06:58:27 INFO] total locks = 1, caller = 296, caller locks = 1
[SERVICE: 0x128,06:58:27 INFO] [1] Begin Unmounting...
[SERVICE: 0x128,06:58:27 INFO] [1] progress is now 3
[SERVICE: 0x128,06:58:27 INFO] total locks = 2, caller = 296, caller locks = 2
[SERVICE: 0x128,06:58:27 INFO] Ejecting media
[SERVICE: 0x128,06:58:27 INFO] SUCCESS
[SERVICE: 0x128,06:58:27 INFO] Volume lock success!
[SERVICE: 0x128,06:58:28 INFO] total locks = 3, caller = 296, caller locks = 3
[SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW stop
[SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:29 INFO] [1] input #7 from src #0
[SERVICE: 0xEC,06:58:29 INFO] [1] input #7
[SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:29 INFO] [1] input #8 from src #0
[SERVICE: 0x11C,06:58:29 INFO] [1] input #8
[SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW took 625 ms
[SERVICE: 0x128,06:58:29 INFO] total locks = 2, caller = 296, caller locks = 2
[SERVICE: 0x128,06:58:29 INFO] total locks = 1, caller = 296, caller locks = 1
[SERVICE: 0x128,06:58:29 INFO] [1] Finished Unmounting with status 1
[SERVICE: 0x128,06:58:29 INFO] total locks = 0, caller = 296, caller locks = 0
[SERVICE: 0x128,06:58:29 INFO] [1] Ext app unmount request finished!
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:58:30 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x114,06:58:30 INFO] [VolumeRemoved] existing mask 0x20, arrive mask 0x20
[SERVICE: 0x114,06:58:30 INFO] [1] value = 1
[SERVICE: 0x114,06:58:30 INFO] [1] input #9 from src #0
[SERVICE: 0x128,06:58:30 INFO] [1] input #9
[SERVICE: 0x114,06:58:30 INFO] [InterfaceRemoved]
[SERVICE: 0x114,06:58:30 INFO] [1] value = 0
[SERVICE: 0x114,06:58:30 INFO] removed device number 2 from m_objDeviceNumberMap
[SERVICE: 0x114,06:58:30 INFO] [1] input #10 from src #0
[SERVICE: 0xEC,06:58:30 INFO] [1] input #10
[SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 INPUT #9] - (HDW) Volume Unmount
[SERVICE: 0x128,06:58:30 INFO] [1] progress is now 3
[SERVICE: 0x128,06:58:30 INFO] [1] Setting progress to 3
[SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Connected}
[SERVICE: 0x128,06:58:30 INFO] [1] *** UNMOUNTED - Sending event out, device session 0.
[SERVICE: 0x128,06:58:30 INFO] [1] !!!!! DoConnectStateAction() INTERRUPTED.
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #10] - (HDW) Interface Removal
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Unknown}
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 ACTIONS] - {Unknown}
[SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,06:58:30 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
[SERVICE: 0xEC,06:58:30 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
[SERVICE: 0xEC,06:58:30 INFO] [1] progress is now 0
[SERVICE: 0xEC,06:58:30 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #11 from src #0
[SERVICE: 0x11C,06:58:38 INFO] [1] input #11
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #12 from src #0
[SERVICE: 0x128,06:58:38 INFO] [1] input #12
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #13 from src #0
[SERVICE: 0xEC,06:58:38 INFO] [1] input #13
[SERVICE: 0x11C,06:58:38 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0x128,06:58:38 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0x128,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0xEC,06:58:38 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #14 from src #0
[SERVICE: 0x11C,07:02:24 INFO] [1] input #14
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #15 from src #0
[SERVICE: 0x128,07:02:24 INFO] [1] input #15
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #16 from src #0
[SERVICE: 0xEC,07:02:24 INFO] [1] input #16
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #17 from src #0
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #18 from src #0
[SERVICE: 0x11C,07:02:24 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x128,07:02:24 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
[SERVICE: 0x128,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,07:02:24 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,07:02:24 INFO] [1] input #17
[SERVICE: 0x11C,07:02:24 INFO] [1] input #18
[SERVICE: 0xEC,07:02:25 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:25 INFO] [MACHINE 1 INPUT #18] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x114,07:02:27 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 1
[SERVICE: 0x114,07:02:27 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
[SERVICE: 0x114,07:02:27 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x114,07:02:27 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x114,07:02:27 INFO] [1] added device number 2 to m_objDeviceNumberMap
[SERVICE: 0x114,07:02:27 INFO] [1] input #19 from src #0
[SERVICE: 0x128,07:02:27 INFO] [1] input #19
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #20 from src #0
[SERVICE: 0xEC,07:02:27 INFO] [1] input #20
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #21 from src #0
[SERVICE: 0x11C,07:02:27 INFO] [1] input #21
[SERVICE: 0x114,07:02:27 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0x114,07:02:27 INFO] looking up device # for \\.\F:
[SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x114,07:02:27 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 0
[SERVICE: 0x114,07:02:27 INFO] [1] input #22 from src #0
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #23 from src #0
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #19] - (HDW) Interface Arrival
[SERVICE: 0x128,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
[SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x128,07:02:28 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x128,07:02:28 INFO] VendorId: Apple
[SERVICE: 0x128,07:02:28 INFO] ProductId: iPod
[SERVICE: 0x128,07:02:28 INFO] revision: 1.62
[SERVICE: 0x128,07:02:28 INFO] vendor bytes:
[SERVICE: 0x128,07:02:28 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
[SERVICE: 0x128,07:02:28 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x128,07:02:28 INFO] [1] Power State: Powered
[SERVICE: 0x128,07:02:28 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x128,07:02:28 ERROR] Did not find first letter of stage
[SERVICE: 0x128,07:02:28 INFO] got HotPlugState 0
[SERVICE: 0x128,07:02:28 INFO] [1] serial number 000A27001547056B
[SERVICE: 0x128,07:02:28 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
[SERVICE: 0x128,07:02:28 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0xEC,07:02:28 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #21] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [1] input #22
[SERVICE: 0x128,07:02:28 INFO] [1] input #23
[SERVICE: 0xFD8,07:02:28 INFO] <0x4> Got Serial #
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x128,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,07:02:28 ERROR] Did not find first letter of stage
[SERVICE: 0x11C,07:02:28 INFO] got HotPlugState 0
[SERVICE: 0x11C,07:02:33 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x11C,07:02:33 INFO] [1] ===== iPod with Video =====
[SERVICE: 0x11C,07:02:33 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,07:02:33 INFO] 7:2:33, year 2007, day of yr. 288, GMT offset -20 isDST 1
[SERVICE: 0x11C,07:02:33 INFO] [1] progress is now 0
[SERVICE: 0xFD8,07:02:33 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:02:33 INFO] Mounted
[SERVICE: 0xFD8,07:02:33 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:02:33 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:02:33 INFO] Mounted
[SERVICE: 0x90C,07:02:33 INFO] [1] already mounted!
[SERVICE: 0x11C,07:02:34 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x11C,07:02:34 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x11C,07:02:34 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
[SERVICE: 0x90C,07:02:34 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,07:02:34 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0x90C,07:02:34 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,07:02:34 INFO] Mounted
[SERVICE: 0x90C,07:02:34 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,07:02:34 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,07:02:34 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0xFD8,07:02:35 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:02:35 INFO] Mounted
[SERVICE: 0xFD8,07:02:35 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:02:35 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:02:35 INFO] Mounted
[SERVICE: 0x90C,07:02:35 INFO] [1] already mounted!
[SERVICE: 0x90C,07:02:35 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xF8C,07:02:35 INFO] iTunes already running in current session.
[SERVICE: 0x90C,07:03:51 INFO] Mounted
[SERVICE: 0x90C,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,07:03:51 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:03:51 INFO] Mounted
[SERVICE: 0xFD8,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:03:51 INFO] <0x4> GetFormatType() returned unknown format 0
The iPod updater logging file cannot be found.

I had this same exact issue happen to me this morning, and I lost 40 gigs worth of transferring in restoring it. I put a few albums on for the day, and when I tried connecting again this evening, the same thing happened. It hit me when it happened the second time that both times I had the iPod locked when it connected it to the computer. I'm pretty sure I've never accidentally connected it while locked before. My guess it that it is unable to read the content since the iPod is locked, and somehow this causes some sort of corruption that prevents it from seeing the files until a restoration is done. I would think Apple should be able to release an update which would detect if the iPod was locked and tell you to unlock it rather than to go through this process of losing all your music from the iPod. It scares me to think this could happen again simply if I am absent-minded in the future and forget to check whether it is locked or not before I connect it.

Error message: "iTunes cannot read the contents of the iPod."

I wanted to get my dad a new iPod for Xmas and transfer all his music from his ancient Classic. But when I connect to my MacBookPro, I get the error message: "iTunes cannot read the contents of the iPod." I see that 90% of the ipod drive is used, but I don't see any songs listed either on the iPod screen or in iTunes, which is worrying. Is there anything I can to save the music? He will be so upset that it's all gone...

My suggestions, when Restoring the iPod.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC.
Disconnect all other USB devices, except the mouse and keyboard.
Stop all other programs except iTunes.
Good Luck!

ITunes cannot read the contents of the iPod " my iPod's name ".

I'm having problems with syncing the 5th gen nano to iTunes 9 on my early 2008 MBP. I had one since September when they came out. It was fine for a while, but then I would get the error message: iTunes cannot read the contents of the iPod "<my iPod's name>". It got to where it was happening every other night or every night when I would try to sync. Of course it goes without saying that this makes the video camera unusable, since one can't count on retrieving the videos.
I talked with Apple Support on the phone. They were very good. Led me through a rescue-restore. This was described as more thorough than a normal restore. It involves a non-trivial button sequence. Also per suggestions I quit using a non-powered hub. I had been hooking both my iPod touch2 and my nano5 up to the hub to sync (not enough USB ports).
We tried the rescue-restore and things looked OK, but then a couple days later on the evening sync, the message came back. I should also mention that I use the pedometer feature in always-on mode, so of course that data gets lost as well.
I then went to the local apple store genius bar, and they saw the same error message I got when they plugged it in, so they decided to give me a new nano5.
I figured this was really it, but last night, on the second evening sync since the initial setup, the same error message is back with the new nano5. Feel bad because it now seems likely there was nothing wrong with my first nano5 (unless both are bad the same way - seems unlikely), but at the same time, I can't use any nano5 like things are now.
So now it's time for some detective work. I have both a nano5 and a touch2, and I use pedometer in always-on mode on the nano5. I wonder if those might be clues. Last night when the error occurred, iirc I had previously sync'ed the nano5 ok and ejected. Then I had sync'ed my touch2. I unplugged the touch2 and went to sync the nano5 again to update for some playlist changes, and that's when the error occurred. I wonder if iTunes is somehow getting messed up and thinking it is still dealing with a touch2, and it trounces the nano5?
It's probably a long shot, but I think I read someone else here with the same error message, and had a touch.
Any ideas, would love to hear. I'm planning to try only syncing the nano5 on a fresh start of iTunes for a while, and see if that prevents the problem.
Thanks,
Joe

OK. How do I uninstall iTunes to reinstall it? Is there an uninstaller? Do I have to chase down plist files or other hidden system things I don't know about? Kind of a dumb question maybe, I've been on a mac at home for like five years now, but uninstalling apps is not something I need to do (that's a good thing).
So, yes, the problem happened again, with the new nano, on the second or third nightly sync (not sure how many days have gone by) since the plane to sync the nano first before the touch. Been using the right usb port also, in case that matters. Used to always use the left. The left port has a non-powered hub that has my time machine disk and a super-duper disk on it, along with an iLoc key. Tonight the two usb disks were not plugged in due to being in the process of be traded out for my other pair (I keep a pair offsite as well - backup-paranoid - but that's another topic).
Do you think it could matter what's plugged into the opposite USB port? Not the nano and the touch only go into the right port straight away - no hub.
Kind of a bummer, this. I hope we can figure it out. Thanks for helping...
BTW, I alway keep all my software up to date.
Joe

Itunes wont sync music to iphone 5c

itunes wont sync music to iphone 5c, skips music portion of sync and gets stuck on "waiting for changes to be applied"
also wont remove cloud downloaded previously purchased songs during sync, i have restored the phone from my old one that was destroyed, but other than that sync pretty much doesnt work at all for photos or anything else.
plenty of available space on brand new phone
IOS 7.0.4
itunes 11.1.3.8

After days of getting frustrated I finally found a solution: Don't use itunes to sync music. After going through pages of possible solutions (restores, syncing albums one at a time, removing all music, deactivating accounts, making a call while syncing and various other things) as well as trying to contact apple support (Which was a joke--They wanted to charge me $19.00 to get help for a problem with their software), I change my Google search terms to "how to sync music without itunes" and I found a program called CopyTrans Manager for free. It only took me a few minutes to add the new tracks to my iphone. It automatically organizes it the same way itunes would and you have the option to make your own playlists. Best of all it synced the first try! Itunes is now dead to me. Now I just have to figure out what I'm going to do with all the free time I have since I'm not going to be spending hours banging my head at my computer ready to throw my phone out the window.

ITunes cannot read the contents of iPhone/iPod Touch?

After following these instructions to update iTunes https://discussions.apple.com/message/21853130#21853130 , Whenever i connect my iPod Touch 5th gen i get this message:
iTunes cannot read the contents of the iPod “(my ipod name)”. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.
i click ok then iTunes says:
The software required for communicating with the iPod is not installed correctly, and you must manually eject the iPod before each disconnect. Please reinstall iTunes to install the iPod’s software.
I am NOT restoring my iPod as i know this is iTunes' problem. I went to the apple website and downloaded iTunes for mac and then installed it Installer said it was succuesful but after opening itunes i get the same problem. What do i do?
I WILL NOT DO ANYTHING IN TERMINAL. I never touch terminal and never will.

Hi,
I've the same problem too.
I had made iPhone sync on my PC in the past. But my HDD went in trouble and I had to buy another and reinstall Windows, so I lost my iTunes library.
Having no sync was ok, since I was comfortable with the photos, applications and music in my iPhone.
But yesterday my iPhone went out of disk space, and my problem started. I then needed to sync. I tried to extract my paid applications from iPhone using "transfer purchases from my iPhone". Unsuccessful, since it did not copy every application. I've tried to download the applications again, but iTunes say I need to pay for them. And now, after some unsuccessful purchase transfers and backups, iTunes says "iTunes cannot read the contents of iPhone", so I think I'm forced to restore the original settings.
What should I do?
I don't want to pay again for the applications I already purchased.
I don't want to loose my application data.
I don't care about my music, photos and videos, cause I can get them elsewhere anyway.
Is there a way to save my iPhone, applications and data?
Thanks

TS2771 itunes cannot read the contents of the ipod

Has anybody found a way to fix this error? I have restored my ipod several times, but keep getting the error every week.

I am having the same problem as the original poster on my IPOD CLASSIC. Here is a link to the product page on IPOD CLASSIC for those who may not know what it is.
I keep getting the error over and over. I am able to successfully reformat the device, and reinstall all my tunes etc. and everything's good. I do nothing in particular, maybe listen to a podcast. A week later, the tunes and podcasts are GONE and the iPod says there is no music, however all my photos are present. I plug it in. My disk data is present (I have it enabled for disk use) however iTunes blows the following error.
iTunes cannot read the contents of the iPod “MYPOD”. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.
Here is the SMART data for the iPod Classic's internal hard drive.
Retracts: 7
Reallocs: 0
Pending sectors: 0
PowerOn Hours:2849
Start/Stops: 7201
Temp: Current 32C
Temp: Min 9C
Temp: Max 51C
(those are very good numbers by the way, indicating a healthy drive.)
Any ideas? This started happening constantly several months ago, If I recall there was an iTunes update around that time.

Itunes wont read music unless CD or ipod is connected

Similar Messages

Maybe you are looking for