Itunes wont reckonise ipod classic

when i conect the classic to Mac it reads OK To Disconnect ea time..... then it wont rekonise.... iphone works fine with same lead and usb port ... any help would be great....thanks

Do a Reset of the iPod, if you have not already (this restarts the iPod).
http://support.apple.com/kb/ht1320
If it immediately says OK TO DISCONNECT on the iPod screen, it may be seeing the connection only as a power connection (like connecting it to a USB power adapter).  That could be caused by the USB cable or the dock connector on the iPod being worn out, so that the "pins" for the data connection are not working (althoug it still connects for power).
If you have another USB docking cable (preferably one that is newer), try using that one to see if it makes any difference.

Similar Messages

  • Problem syncing itunes 12 with ipod classic on a PC

    Hi I just purchased a new Lenovo Yoga Pro 3 and installed the latest itunes 12 on it, but it won't sync with my ipod classic.  The itunes detects my ipod classic, but won't sync the music files and just ejects the ipod instead.  I have tried installing an older version of itunes onto my computer (version 11) but version 11 won't work on this laptop.  Please help!

    Unfortunately I cannot get the movies to play through Quicktime at all on the PC - the movie seems to play (timer runs and the little triagle moves), but all I get is a blank screen... The first time I tried to play one of the files, QT told me I may need to download additional codecs (although it did not indicate which one) - and directed me to the third-party codec download site. However, after downloading several of the different codecs, the .mov files still won't play through QT on the PC.
    Rule of Thumb: never download codec components arbitrarily. Since the files load into the QT Player, what you should have done was open the "Inspector" window and check the "Format:" entry to see which codec was used to compressed the video and then download the "correct" QT codec component and only the needed one.
    Is it not possible to get these files to play on a PC since they were imported and made on an iMac with iMovie?
    I would tend to suspect that you may be using an HDD or DVD camcorder here. Basically, the MOV file container is generic and can hold any valid combination of audio and video compression formats. DV would have imported as DV content. AVCHD or HDV would have imported as AIC/AIFF content which is normally supported intrinsically by QT. On the other hand, the content from MPEG2/AC3 based camcorders employs a special iMovie '08 import/conversion module which converts the AC3 to AIFF and the MPEG-2 "P-frames" and "B-frames" to "I-frames" which effectively turns the video into an M-JPEG track but leaves it labeled as MPEG-2 content which would likely confuse the QT Player. Further, if iLife '08 itself installs the playback component for this compression combination, you may not be able to locate/install a Windows version of this playback codec at all and may end up having to convert your DVD stored MOV files on an iLife '08 equipped Mac.

  • I have synced an audiobook purchased from iTunes onto my ipod classic but I cannot find it on my ipod.  Any suggestions?

    I have synced an audiobook purchased from iTunes onto my ipod classic but I cannot find it on my ipod.  I have looked in songs, artists, audiobooks, podcasts, etc., etc. with no luck.  Any suggestions?

    Hi mole02,
    Welcome to the Support Communities!  If you had issues with your movie rental, you can report it to the iTunes Store.  These folks can look at your billing account with you.
    Report a problem with an item purchased from the iTunes Store, App Store, Mac App Store, or iBooks Store - Apple Support
    http://support.apple.com/en-us/HT204084
    Learn how you can request help with an item purchased within the last 90 days.
    To report a problem or request assistance with an item purchased from the iTunes Store, App Store, Mac App Store, or iBooks Store:
    Visit reportaproblem.apple.com in your browser.
    When prompted, enter the Apple ID and password used to initiate the purchase of the item, then click Sign In.
    Find the item you're having a problem with, then click Report a Problem next to it.
    From the Choose Problem menu, choose the issue you're having.
    Follow the onscreen instructions. You might be asked to describe the problem in a text field.
    Click Submit, and we'll review your problem.
    If you use Family Sharing and you have a problem with a shared item, ask the family member who initiated the purchase to report the problem using the steps above.
    I hope this information helps ....
    - Judy

  • I need to know how to upload music to iTunes from my iPod Classic to my new mini Mac OS X version 10.9.2

    I need to know how to upload music to iTunes from my iPod Classic to my Mini Mac OS X Version 10.9.2.  Thanks in advance
    Miriam Parsons

    As soon as I posted the message I realised the download had failed to complete. Sorry, I'm so daft but thank you very much for your help :-)

  • Recently, I have been unable to import all of the "songs" or discs from multi-CD operas in itunes to my ipod classic or network hard drive. Only 1 or 2 discs import despite plenty of available space in both devices. Very frustrating! Any suggestions?

    Recently, I have been unable to import all of the "songs" or discs from multi-CD operas in itunes to my ipod classic or Seagate network hard drive. Only 1 or 2 discs or 20 or so "songs" out of a  total of 40 - 80 import despite plenty of available space in both devices. When I check itunes, each opera disc with all of the "songs" are listed. Very frustrating! Any suggestions?

    right click on the songs that do transfer and select create aac version then re sync
    Peace, Clyde

  • Why is it taking forever to transfer tunes from itunes to my ipod classic, I have over 6500 to copy and the current rate is 2 tunes per minute

    I am just copying tunes from itunes to my ipod classic, there are 6675 to copy and the present rate of transfer is 2 tunes per minute, which means that it will take over 55 hours at this rate,
    This has never happened before previously it took next to no time so what is happening?

    That show that your original library is damaged and needs to be repaired.  Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • I cant transfer from iTunes to my iPod classic. Whats going on?

    I have tried to transfer Star Trek into Darkness and Iron Man 3 from my itunes to my ipod classic. I have reset the ipod and updated itunes since maverick came out. Help.

    I called and asked them about it and Apple didn't know how to help me. They didn't know why it wasn't working.

  • HT1923 how do i sync itunes to my ipod classic with the newest version of itunes?

    how do i sync itunes to my ipod classic with the newest version of itunes?

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar.
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing and follow the instructions.

  • Why wont my ipod classic connect with my itunes

    my ipod classic wont connect to my itunes

    Howdy sunsetsami,
    If you are having an issue with your iPod classic not showing up in iTunes on your computer, I would suggest that you troubleshoot using the steps in this article - 
    iPod not appearing in iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Windows 7 computer wont recognize ipod classic but itunes will pick it up.

    ive been trying to transfer music from my ipod classic to iTunes library and ipad but iTunes wont let me back up ipod classic plus computer doesn't show ipod in computer settings.
    help
    thanks

    Try:
    iOS: Unable to import photos to computer

  • How do I move my old Itunes in my emachines-computer to my new hp-computer? And why wont my Ipod classic sync with my new itunes? Everything on your support is about mac! I have windows 8

    Help!

    Hello KatarinaW,
    While not specifically for Windows 8, the following article provides several options for transferring your library that can be used in most versions of Windows.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    This article will step you through the process of enabling 'manual mode' on your iPod Classic, which will allow you to sync it with multiple computers without disrupting the current contents of the iPod.
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/HT1202
    Cheers,
    Allen

  • Windows Vista, Itunes 10.7, ipod Classic, scan and fix message - why?

    I am trying to connect my wife's Ipod Classic to our Windows Vista computer.  I get a Scan and Fix Message for the Ipod from Windows.  I don't let it scan and click continue.  Itunes is frozen and won't recognize the ipod.  This has happened since upgrading to Itunes 10.7.  Also Itunes is choppy in playing all video content since upgrading to Itunes 10.7.
    I have checked system requirements and driver upgrades.  So far I have no fix.  One site recommended turning off WiFi sync for all devices in Itunes.  But of course the device must be connected, and mine won't connect.  All my itunes video is languishing.  :-(

    Wi-Fi sync won't apply since you have an iPod Classic and it doesn't contain any Wi-Fi hardware.
    To get rid of the Scan and Fix error, see this page: http://www.yourlocaltech.com/resolve-vista-scan-and-fix-error-when-plugging-in-i pod-or-other-devices/
    We'll start there for now.
    B-rock

  • HT1386 I can't get my iPod Classic to sync with iTunes.  My iPod Classic is up to date, and i have downloaded the latest version of iTunes.  When trying to sync, it gives the message "The iPod "Brad D's iPod" cannot be synced because it cannot be found."

    Do I have to un-install and re-install iTunes or do I have to restore my iPod Classic (I don't want to lose everything in my music library)?

    Clicking sounds from an iPod that has a hard drive for storage is not a good thing.  It usually means the hard drive is faulty.  That is the likely reason for getting an error during the attempt to Restore.
    If you use a Mac, you can try putting the iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    If it goes into Disk Mode, connect the iPod and instead of running iTunes, run Disk Utility.  Does the iPod appear in the Disk Utility sidebar?  If it does, select the iPod device in the sidebar, not the volume indented below the device (if there is one).  Go to the Erase tab.  Set the Format to Mac OS Extended (Journaled).  Name does not matter.  Click on Security Options and choose to write a single pass of zeros over the entire disk.  This serves as a good "stress test" for the iPod's hard drive.  Back on the main window, click Erase.
    This takes longer than a regular erase, but you should see steady progress.  If it errors out, or stalls for a LONG time (like hours), the hard drive is likely to be faulty.
    If it completes successfully, quit Disk Utility, run iTunes and try to do another Restore

  • My iPhone 4 isn't recognized by iTunes, but my iPod classic is.  How do I resolve this?

    I was able to sync my iPod classic to iTunes no problem.  I have not updated my phone in a very long time untilo yesterday.  I also have not synced/backed it up since March.
    I followed the instructions here:
    http://support.apple.com/kb/ts1538
    iTunes is update, I uninstalled/reinstalled 3 times today.
    My phone has the newest iOS on it.
    My USB cable and port are fine, as I just synced my iPod on it.
    My phone charges, the bottom port is fine.
    I've restated my phone numerous times.
    I have tried the MSCONFIG onstructions.
    I am unable to use another computer for this.  I can actually go into iTunes, add file to library, and add photos that way.  So, it's recognized by my computer.  However, iTunes won't reconize it to sync.  Any help would be appreciated.

    Hello Lawrence,
    I do have AppleMobileDeviceService.exe running.
    My USBs are plugging in straight into the laptop.  All 4 work.  Just today, I synced my iPod with multiple USB ports.  It works for the iPod, but the iPhone won't pop-up.  The iPhone does not appear in iTunes as a button anywhere.
    I am unable to use another computer for this.  I can actually go into iTunes, add file to library, and add photos that way.  So, it's recognized by my computer.
    This should have been seperated.  Basically, I don't have another computer accessible to me to back-up sync on iTunes with.
    The last part means in iTunes, I can click "File > Add file to library" and the iPhone is shown as a camera icon.  I can click on it and have access to photos.  I can add those photos to the iTunes library.  That's about as far as the connectivity goes with the iPhone right now.

  • Itunes not recognising ipod classic

    Hi all, if your using a Black iPod classic 160GB with wheel on the front when using and connecting to iTunes, if iTunes does not recognise your iPod you will need to  reload iTunes from Apple site, don't let any one tell you it is possible to uninstall iTunes THIS IS NOT POSSIBLE !!!!!! !!!! Even the people on the chat site could not tell me this. You will just need to reload over your existing iTunes, then when the system asks you, restore your iPod back to factory settings, don't fear as you won't loose anything! It will then take a while to copy everything back onto iPod, like a software update for iPod.I went through this experience and spent hours trying to uninstall etc until I got onto a very helpful guy in The States called Noble. So thanks. Good luck.

    I've seen a few other posts from people having issues with Playlists not being correctly synced with various models of iPod, but as yet, I've not seen a solution.
    I guess we'll just have to wait for Apple to fix it in an iTunes update. I think it's an iTunes issue rather than a Classic issue, and I'm sure Apple already know about it, but if you feel like it, you could send them some feedback at: http://www.apple.com/feedback/itunesapp.html or for the Classic at http://www.apple.com/feedback/ipod.html. Interestingly, the iTunes feedback has no option for "bug report". Make of that what you will!
    Note that Apple do read the feedback, but they will not respond to you.

Maybe you are looking for

  • Basic toString

    Argh! this is such a simple question but my mind aint working and you know the rest.... here is my code snipet.. public class Sieve      private boolean[] eratostenes;      private long j;      public Sieve (int n)           boolean[] eratostenes = n

  • Single chart report

    Hi all, I have a chart report which showing yearly country revenue data,country is on x-axis & revenue is on y-axis. Its showing data for country A,B &C But I want a report which shows data like for country A with related revenue view in first then f

  • Allowing Shockwave Player to run for non-admins

    Hi all, I see the following problem on and off for years now, with Adobe Flash and in particular Adobe Shockwave Player. I have a school that has a Windows 7 lab. Shockwave Player 11.6 is installed as part of the base image. It shows up in "Programs

  • Customise Generated File "Reference.cs"

    We have the following setup. A VB6 application calls a .NET COM component that acts mainly as a forwarding system calling methods on a web service. When you open up the VB6 object browser and look at the methods exposed by the .NET COM Component, you

  • Link in e-mail

    Hi after publishing to mobile me I try to tell a friend and get the standard e-mail telling them to click on link below but the link is missing. Anyone please help