Itunes wont work after the update 7.1

it wont open and just says.... itunes cannot run because it has detected a problem with your audio configuration. i have uninstalled it 10x or more and reinstalled with no luck

Did you take a look at the topic I told you it explain to you hot to remove iTunes, without loosing your files. Theres also a link to install the older 7 version. Hope this helps you out.

Similar Messages

  • My itunes wont work after update

    my itunes wont work after update. whats the problem.

    also, the curser just goes round and round. cant close by clicking x, have to close frome the place that says close. then message says program not responding.

  • Same problem as many others. iTunes quit working after recent update. Re-installed, still won't work. Error MSVCR80.dll not found.

    My iTunes quit working after the most recent update.  Re-installed as instructed without any success. Error message APSDaemon.exe MSVCR80.dll was not found. Reported as error 7 (Windows error 126)

    Doublechecking. Have you tried the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • Satellite Pro C850 wont work after Bios update

    my satellite pro c850 cd wont work after bios update from toshiba.
    what do i do?

    Saying: dont work you mean it does not power up or what do you mean exactly?
    Did you flash the BIOS properly?
    Possibly something went wrong during the update and this means that ROM module isnt flashed properly
    In most cases a special BIOS crisis disk would be needed to get it working
    Not quite sure if you can get it fixed by your own
    Check this thread. Maybe it helps:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
    Otherwise you need help from authorized service provider available in your country.

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

  • My facetime on iphone 4 is not working after the update to IOS7

    Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working  after The update to IOS7       Thanks xxx

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Videofunction on iphone 4 is not working after the update to IOS7

    Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
    Anyone else experiencing the same problem?
    Anyone with solutions?
    Thanks!

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

    Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
    Ron Bell
    [email protected]

    Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
    I do not work for Mozilla but I do have experience of releasing software for public usage.
    Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
    You can go back to the old version of Firefox but that won't always solve your problem.
    The web site below tells you how:
    https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

  • I can't see apple store in my Itunes with windows7  after the update

    I can't see apple store in my Itunes with windows7 after the update
    a

    Hi Markie,
    It's not in the top window now, it's in the main section. When you plug your iPod in click on it and at the bottom of the window the Capacity pole changes as it adds stuff.
    Is that what you're looking for?
    Regards,
    Colin R.

  • HT203171 my track pad is not working after the update of iTunes 11.1 version.

    Two years old macbook pro track pad stuck up and moving without my fingers,this thing happens from 18 th of this month,on that day i hadbeen updated the new itunes for iOS7...after that my mac book pro trackpad not responding...please help...

    I have been experiencing the same issue. My MacBook Pro is a little more n 3 years old.
    AFter the updates, my computer seemed to run very erratic when running a few programs at once and the trackpad suddenly went on the fritz. For a week now, it jumps around erratically and selects things on its own.
    I reset the PRAM, tried it in safe mode, reconfigured the mouse settings and nothing seems to work.
    HAe you had any resolution yet?

  • Ipad apps wont work after downloading update 5.1.1

    My I pad apps wont work after I downloaded OS update 5.1.1
    I have tried restoring, but it doesn't solve the problem.

    Hi
    I had the same problem since I updated, the iPad shows "No Sim" I have taken it out, put it back in after cleaning it! All the usual possible solutions that everyone else has tried? So I have not been able to connect for over a week now and I intended to pop into the Apple geek guys to let them have a look, but was scared that they might suggest it would have to be sent away!!! What would I do?. So last night I was fiddling around with the IPad and thought I would try something, AND GUESS WHAT! It works!!!!
    This is what I had done
    1. Take the SIM out of the IPad
    2. Leaving the SIM out, turn the Ipad off using the Home and power button at the same time, do this 4 times
    3. Now insert the SIM back in it then found my SIM
    I cannot confirm the is the ultimate cure, but it worked for me and I have tried all the other possible solutions, it's worth a try?
    Barlow2012

  • Jquery content not working after the updates from firefox

    Hi, i've realized that some of my website's banner is not working after the recent updates from firefox, whereas those website's banner is working in google chrome.
    Hope there is a solution for this as i'm using the firefox for years and wish this issues can be settle.
    The banner URL is http://www.irs.com.my/slider/index.html

    SlideDeck has a post on how to resolve this error, caused by a bug in this very old version of their library that you're using. See: [http://www.slidedeck.com/blog/firefox-20-update-and-slidedeck-js-weve-got-you-covered/ Firefox 20 update and SlideDeck.js – we’ve got you covered] for more information. As a Pro customer, you were supposed to get an email notice, but... here you are.
    I studied the script before discovering that and found two issues, but there might be more:
    (1) slidedeck.jquery.js detects Firefox 20 as Firefox 2 and halts. Note that this regex is the problem:
    firefox2:F.match(/firefox\/2/)?true:false
    (2) Starting in Firefox 16, the -moz-transform property was unprefixed, that is, you need to use transform for Firefox 16 and later.

  • Does the Apple Radio Remote work after the update?

    Anyone try it after the update? I know it didn't work before...
    And a side question, since there doesn't seem to be anywhere to ask...are the support forums (especially logging in) constantly crashing Safari (Mac version, desktop) for you?

    The Apple Radio Remote I am assuming you mean the one linked below
    http://www.apple.com/ipod/accessories.html
    It would be the accessory attached to a ipod.
    IF this is the accessory your referring too. Then please note that the compatible devices that it works with is only ipods and not the iphone. Check the link below for yourself.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=B9E C42BD&nplm=MA070G/C
    If you wish to have this accessory available for the iphone then leave feedback below
    http://www.apple.com/feedback/iphone.html
    And no logging into the forums is quirky but it does not affect my safari especially not crashing.
    GFF

  • How I Got iTunes to Work After the Latest (So-Called) Update

    Does anyone at (cr)Apple test updates before releasing them?!! My iTunes, as I see has happened with many, MANY others, would not open after downloading the latest update. Here's what I did to fix this issue:
    1. Go into Windows Control Panel, click on "Programs and Features", and find both Apple Application Support & Apple Mobile Device Support. Uninstall both of them (in my case, both applications were listed twice, with two different version numbers. Ihad to uninstall the newer one first, before I could uninstall the older version).
    2. Download the correct version of iTunes for your operating system (32-bit for 32-bit versions of Windows; 64-bit for 64-bit versions of Windows), and SAVE it (NOT run!) somewhere, like your desktop.
    3. Once downloaded, right-click on the file and use a program like 7-Zip to extract the files somewhere you'll be able to locate them (in my case, "ITunes64SetUp").
    4. Go into the folder and find the follwing two files or programs: "AppleApplicationSupport.msi" and "AppleMobileDeviceSupport64.msi" (or, I'm assuming if your system is 32-bit Windows, that last one would be called "AppleMobileDeviceSupport32.msi" or maybe just "AppleMobileDEviceSupport.msi).
    5. Double-click each one and that will launch the install programs. Follow the prompts and install both.
    6. After that, your iTunes should work correctly. Mine did!
    Good luck!
    This is ridiculous that we have to do this - the average computer user would have NO idea how to fix this!

    Quit iTunes.
    Copy the iTunes Folder to the D drive, leave a copy on the C drive.
    Then open the XML file in the C drive in the iTunes folder with a Text editor with "Find and Replace" ability.
    Correct all the partial pathnames so it matches the new location where the iTunes Folder is now.
    Example:
    Find: C:\Windows\Users\Johnny\Music\iTunesFolder...   to
    Replace: D\\Music\iTunesFolder....
    Quit iTunes and transfer all the folders out of the iTunes Folder on C except the two single files, including the XML you edited.
    Start iTunes and click on one song you have but dislike, if it plays your fine. Leave the C/iTunes folders alone to make sure it works for all your content, then finally back it up or delete it to make room on C. Do a Windows defrag on C for increased performance.
    If you get a Explanation Point in iTunes, it didn't find the file and you didn't correct the pathnames correctly..

  • HT4623 itunes wont work after i got the newest one

    i updated to the newest itunes for my ipad with all software updates and the itunes wont load said missing files and says to reinstall so i did it and it is doing the same thing

    Hello there, Smorsi.
    The following Knowledge Base article offers up some great recommendations:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    If you have to reinstall yet again, keep in mind the process to uninstall and reinstall must be done in a very specific fashion. Use the linked article to make sure you cover your bases.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for