Itunes wont work anymore...error 7

My itunes wont work anymore on my latop, i uninstalled it and reinstalled it but when i try to get in to my itunes and error 7 message will pop up saying that it was installed incorrectly and ive installed it several times to find the same thing happening. I dont know what to do anymore so if someone could help me out i would really appreciate it a lot!!!

I got an upgrade iTunes request from Apple. And upgraded. I should never have done that. Now it says that "iTunes is not properly installed". Other strange messages are also coming up, like missing .dll files etc.
I have deleted all Apple programs. Used Revo Uninstall that also deletes registry files and left over files. I have used ByeiTunes and Registry mechanic. I have used everything that is suggested on this site:
http://www.howtogeek.com/howto/23959/completely-remove-itunes-and-other-apple-so ftware-from-a-windows-computer/
After doing all this, I got the same error message. So what wrong with Apple? When you have bought the product, you are left out in the dark. I have given up. Synchronizing the calendar with Outlook I can do manually, pictures that I have downloaded to my phone, I can access directly, and pictures taken by the phone I have to send to myself through e-mail. Music I never download using iTunes.
I have had enough. After this and after Apple has changed the plug that leaves me with 8 useless chargers and stands, there will be Samsung next time. I'm running Windows 7, 64 bits.
Hans (Professor of Marketingy). I wonder if Apple is reading this?

Similar Messages

  • My Itunes wont open - reading error "cannot be read because it was created by a newer verdion of itunes"

    My Itunes wont open - reading error "cannot be read because it was created by a newer verdion of itunes"
    should i uninstall/ reinstal.
    will i loose all my music nd playlists?

    This technique should work...
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • ITunes wont work because of DEP

    My itunes wont work because of DEP closing it. I have tried unistalling my quicktime and unistalling my itunes and reinstalling them but it still wont work. i have followed a couple of discussions but  it still wont work. Can someone help me please.

    many thanks. That's got another possibility ruled out.
    Checking again. When you did your iTunes reinstall, was it a complete iTunes uninstall/reinstall as per the instructions from the following documents?
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Hi itunes wont install windows error 2 keep popping up what do i do?

    hi itunes wont install windows error 2 keep popping up what do i do?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • My itunes wont work after update

    my itunes wont work after update. whats the problem.

    also, the curser just goes round and round. cant close by clicking x, have to close frome the place that says close. then message says program not responding.

  • My itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens

    my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • HT201413 itunes wont install, runtime error R6034 also 'apple mobile device' wont start! help!

    itunes wont install, runtime error R6034 also 'apple mobile device' wont start! help!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Itunes stopped working.  error message ADiAdID

    itunes stopped working.  error message ADiAdID

    Hello alanllc,
    The article linked below provides some useful steps that can help get iTunes working again.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Allen

  • Re: The FN button wont work anymore

    Hi all,
    I have a problem with my L500-128 Satellite.
    After upgrading Windows Vista(64bit) to Windows 7 home(64bit) my FN button wont work anymore.
    I installed the Toshiba Value Added Package and Flash Cards supports utility and it still doesnt work.
    Hope to hear from someone soon^^.
    Jeremy

    Try with Start > All programs > Toshiba > Utilities > Restart Flash Cards.

  • My voiceover wont work anymore it has a yellow triangle on it now

    my voiceover wont work anymore it has a yellow triangle on it now can anyone help me

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    It is also completely possible that the impact has caused physical damage.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Volume switch on side of phone wont work anymore. HELP!

    the switch on the side of my phone to change it from noise to vibrate wont work anymore. what can I do?

    the switch on the side is not for changing from noise to vibrate.  It is a mute switch to turn sound off.  For vibrate go to settings>sounds and then look at the first two switches and chose the settings you want for them

  • After Update USB Devices wont work anymore

    Hello,
    after my first Arch installation on my ASUS UX31 I had 2 problems after makeing updates:
    1. My USB Devices wont work anymore, but I belive they are still recognized because they are displayes via "lsusb -t":
    2-1.1:1.0: No such file or directory
    2-1.2:1.0: No such file or directory
    2-1.4:1.0: No such file or directory
    1-1.5:1.0: No such file or directory
    1-1.5:1.1: No such file or directory
    1-1.7:1.0: No such file or directory
    1-1.8:1.0: No such file or directory
    1-1.8:1.1: No such file or directory
    /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
    /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
    |__ Port 1: Dev 6, If 0, Class=hub, Driver=hub/4p, 480M
    |__ Port 1: Dev 7, If 0, Class=HID, Driver=, 1.5M
    |__ Port 2: Dev 8, If 0, Class=HID, Driver=, 1.5M
    |__ Port 4: Dev 9, If 0, Class=vend., Driver=, 480M
    /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/8p, 480M
    |__ Port 5: Dev 3, If 0, Class='bInterfaceClass 0x0e not yet handled', Driver=, 480M
    |__ Port 5: Dev 3, If 1, Class='bInterfaceClass 0x0e not yet handled', Driver=, 480M
    |__ Port 7: Dev 4, If 0, Class=vend., Driver=, 480M
    |__ Port 8: Dev 5, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=, 12M
    |__ Port 8: Dev 5, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=, 12M
    I need these Devices because they are my only network access via the Asix USB to Ethernet Adapter.
    After the installation I have compiled and used the drives for the Asis adapter.
    The both other devices are my USB Keyboard and Mouse.
    2. My other problem is, that after the update my resulution of my console is very weak, this is just bad but not a real problem, I can live with that.
    Thanks in advance for helping me

    on plugin
    May 4 21:07:06 localhost kernel: [ 49.202535] usb 2-1.2: new high speed USB device number 10 using ehci_hcd
    May 4 21:07:06 localhost kernel: [ 49.287984] hub 2-1.2:1.0: USB hub found
    May 4 21:07:06 localhost kernel: [ 49.288333] hub 2-1.2:1.0: 4 ports detected
    May 4 21:07:06 localhost kernel: [ 49.555951] usb 2-1.2.1: new low speed USB device number 11 using ehci_hcd
    May 4 21:07:07 localhost kernel: [ 49.712506] usb 2-1.2.2: new low speed USB device number 12 using ehci_hcd
    May 4 21:07:07 localhost kernel: [ 49.865853] usb 2-1.2.4: new high speed USB device number 13 using ehci_hcd
    unplug:
    May 4 21:06:57 localhost kernel: [ 40.059117] usb 2-1.2: USB disconnect, device number 3
    May 4 21:06:57 localhost kernel: [ 40.059128] usb 2-1.2.1: USB disconnect, device number 7
    May 4 21:06:57 localhost kernel: [ 40.059269] usb 2-1.2.2: USB disconnect, device number 8
    May 4 21:06:57 localhost kernel: [ 40.059342] usb 2-1.2.4: USB disconnect, device number 9
    I rebooted several times of course and it was no kernel update.

  • My itunes wont work on my laptop

    help itunes wont work on my laptop every time i open it it works for a few seconds then it says something about a windos error

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...Re-Sync your Content
    Note:
    To remove a forgotten Restrictions passcode you will need to  Restore the Device as New...
    OR... From a Backup created Before the Restrictions Code was set....

  • ITunes wont work on my windows xp, I get Error 7 (Windows error 999)

    iTunes has worked before but after summer vacation it stopped working. I get an Error 7 pop up everytime. I've reinstalled it twice and I get the same error. IDK what to do.

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • ITunes wont open only error message

    iTunes wont open I only get an error message that reads. "The folder iTunes cannot be found or created and is required. The default location for this folder is inside the My Music folder" My music is on an exernal hard drive and it worked before I upgraded and now it wont work.
    Please help

    hiya!
    it's best to leave the "My Music" folder on the C drive. it's a Windows special folder, so having it out on an external can cause weird problems if (say) the drive letter assignment for the external drive changes.
    okay, here's the best place to start:
    iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
    ... but if you run into the complication where "My Music" doesn't appear as an option in TweakUI, try the alternate technique from the following Nigel Carpenter post:
    Nigel Carpenter: re: Itunes problem
    love, b

Maybe you are looking for