ITunes10 does not start from Data-Disk(error 13001)!

After moving my user folder to an external disk I get the message "Could not open Application "iTunes". Unknown error 13001. Reinstalling iTunes did not help, neither did an alias of the iTunes-folder in the equivalent folder on my System-disk.
Any help appreciated!

Found the solution myself. I had a " in the name of the external drive. After removing it all worked fine.

Similar Messages

Mbp 15" does not start from set up disk

I formatted my MBP because it did not recognize the monitor, had to attach an extermal one to view image. Now, I cannot install the original OS because it does not start from set up disk. I was using OSX Lion latest version

Formatting the entire drive was rather excessive to solve a external monitor issue.
Likely a PRAM or SMC reset would have cleared it.
Step by Step to fix your Mac
10.7 Lion can only be reinstalled via the Recovery HD partition or via a external Recovery USB made in advance.
Hopefully the Recovery HD partition is still availalbe, hold the command and r keys down while booting (with a actve Internet connection cable attached to the router or modem) and see what happens. If you get something then format the Macinstosh HD partition in Disk Utility (GUID, OS X extended journaled) and quit, reinstall 10.7 from Apple's servers with your AppleID and password.
https://support.apple.com/kb/HT4718
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/
If not, then hold c or option key and boot from the 10.6 installer disk, use Disk Utility to erase the entire drive on the left and format same (GUID, OS X extended journaled) then quit and install 10.6, then log into AppStore and update to 10.7 again, the Recovery HD partition will be reinstalled automatically.
How to erase and install Snow Leopard 10.6
How to reinstall just OS X or erase/install OS X
If your attemtping to revert your 10.7 Mac to 10.6 then read this, it's a better explaination
How to revert your Mac to Snow Leopard
If your 10.6 disk doesn't work, then call Apple for a replacement disk.

SQL Developer 1.1.3 does not start from NT

We were previously running 1.1(2514) and have just started rolling out 1.1.3 (2766) and have found that the latest version does not start under NT. Error shell32.dll error.
Is there a fix / workaround as this will stop our rollout of this version, which has some interesting BUG fixes ?

I thought so too, but just a couple of months ago Brian added another bug for NT in Re: Sqldeveloper failed to start after latest 1.1.2 Patch .
Doing the search I also came across Sue's more official response in Support for Windows NT? . However that post was over a year old...
K.

VIPCA does not start from root.sh

Hi all,
I've a problem in installing RAC 10g on ia64 architecture.
S.O.: RH Enterprise Linux AS 2.1
Oracle CRS install completed successfully.
The problems came up during DB installation when I need to run root.sh script that should automatically invoke VIPCA.
Here's what I see when I execute root.sh. :
[root@rx5670 root]# /u01/app/oracle/product/10.1.0/db_1/root.sh
Running Oracle10 root.sh script...
\nThe following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/10.1.0/db_1
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
\nCreating /etc/oratab file...
Adding entry to /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Exception in thread "main" java.lang.UnsatisfiedLinkError: allocHASContext
at oracle.ops.mgmt.has.HASContextNative.allocHASContext(Native
Method)
at oracle.ops.mgmt.has.HASContext.<init>(HASContext.java:93)
at oracle.ops.mgmt.has.HASContext.getInstance(HASContext.java:223)
at oracle.ops.mgmt.has.ClusterUtil.<init>(ClusterUtil.java:46)
at
oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:164
at
oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:213
at oracle.ops.mgmt.cluster.Cluster.getNodes(Cluster.java:267)
at oracle.ops.vipca.VipCA.getNodeList(VipCA.java:532)
at oracle.ops.vipca.VipCA.processGUIArgs(VipCA.java:242)
at oracle.ops.vipca.VipCA.runApplication(VipCA.java:2141)
at oracle.ops.vipca.VipCA.main(VipCA.java:2423)
[root@rx5670 root]#
Thanks a lot,
Simone

CSSD does not start (Cluster Manager)
CSSD does not start (Cluster Manager)

Satellite A200 does not start up - LED flashing error

I have problem with my Satellite A200.
The battery button is flashing 2 times blue and 2 times orange and it does not start.
Can somebody help me???????

Hi
Please check this interesting document: What can I do if my computer will not Power On?
If the problem persists please let us know.

Photoshop Elements 11 Organiser does not start from the welcome screen

Having installed Photoshop Elements 11(Windows 7) I cannot open the Organiser from the welcome screen. It can be opened via the Editor but few of the thumbnails are shown as pictures rather as empty squares. The situation does not improve with time but tends to get worse with pictures turning into squares. I have tried the tip with preferences but to no avail. I would be very grateful for some help. Best Regards Ian Tomlinson

Try pressing Ctrl+A (to select all thumbnails) and then refresh again (Edit >> Update Thumbnails for selected items). If that makes no difference you may need to regenerate the cache.
It may be worth rebuilding the thumbnail cache before re-installing. Click the menu:
Help >> System info to find the path to your catalog.
1. Close Organizer.
2. Navigate to C: ProgramData/Adobe/Elements Organizer/Catalogs/My Catalog
3. Find the file - thumb.5.cache
4. Highlight the file and delete it.
5. Re-start Elements Organizer
6. Wait until all thumbnails have been generated.
N.B. ProgramData may be a hidden system file:
http://windows.microsoft.com/en-US/windows-vista/Show-hidden-files

J2EE does not start anymore : shell service error

Our J2EE 640 SP16 doesn't come up anymore.
Into the std.dispatcher.out we see this :
"Service security started. (5 ms).
service shell ================= ERROR =================
Cannot start service telnet; it has hard reference to service shell which is not started.
Service jmx started. (765 ms).
Timed out services:
Service p4 > service p4 start method invoked.
Service tc.monitoring.logviewer > hard reference to service p4.
Service adminadapter > hard reference to service
The all the futher services are not started.
Into teh std.server.out we see al lot of services in timeout.
At the end both the Dispatcher o the serve doesn come up.
What's the reason ?
regards

Hello Mauro,
Check /usr/sap/<SID>/<InstanceID>/j2ee/cluster/dispatcher/log/defaultTraces.<ID>.trc and /usr/sap/<SID>/<InstanceID>/j2ee/cluster/server0/log/defaultTraces.<ID>.trc
Best Regards
Vyara

CS5 does not start from new SSD disc

I have recently exchanged my HDD with a new SSD disc on a Macbook Pro running Mavericks. I have put an image of my original disc on the SSD and after installation everything runs fine as it should, except of Illustrator CS5, which doesn't even start up.
I get the following error:
Adobe Illustrator cannot be opened because of a problem.
Check with the developer to make sure Adobe Illustrator works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
If I actually plug in my old HDD as USB disc and start CS5 there, it runs no problem. Hence it doesn't seem to be a problem of the OS (anyway, it worked fine before changing the discs).
The detailed crash report follows:
Process:
Adobe Illustrator [565]
Path:
/Users/USER/Desktop/*/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier:
com.adobe.illustrator
Version:
Code Type:
X86 (Native)
Parent Process: launchd [150]
Responsible:
Adobe Illustrator [565]
User ID:
501
Date/Time:
2014-01-20 20:03:01.639 +0100
OS Version:
Mac OS X 10.9.1 (13B42)
Report Version: 11
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/AdobeBIBUtils.framework/Versions/A/AdobeBIBUtils
Referenced from: /Users/USER/Desktop/*/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Reason: image not found
Binary Images:
0x8fe14000 - 0x8fe46417 dyld (239.3) <4B280BB1-55F8-313F-86A6-8ADD644ED69E> /usr/lib/dyld
0x94c04000 - 0x94c12ff7 libz.1.dylib (53) <858B4D9F-D87E-3D81-B07A-DF9632BD185F> /usr/lib/libz.1.dylib
0x99ba0000 - 0x99ba0fff com.apple.Carbon (154 - 157) <6E680560-FD53-3C00-BDF7-7AFA28747DC8> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Network Service: GFZVPN, IPSec, utun0
Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: AS2105
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:
Anybody understands what the problem could be?

Uninstall AI and reinstall from the original disks. Something got munched in the imaging. Adobe apps are not fond of such changes.

Mac does not start -your startup disk is full

Hi,
When i turn on my macbook pro 13" (snow leopard) i get the following message:
"your startup disk is full
you need to make more space available on your startup disk by deleting files"
then i log on my account and the screen remains with the mac pink sky without any items.
i restarted and connected the mac to another mac with firewire a deleted some files to get free space.
I turn on again and i get the same message not being able to start the mac.
Is there any solution for that??
best regards

Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751

X does not start yet returns no error

Hi,
I get the same problem as some others:
http://bbs.archlinux.org/viewtopic.php?id=36209
X returns the following output on stderr:
xauth: creating new authority file /root/.serverauth.5993
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux naoko 2.6.22-ARCH #1 SMP PREEMPT Fri Aug 31 19:54:09 UTC 2007 i
686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 13 20:08:20 2007
(==) Using config file: "/etc/X11/xorg.conf"
(WW) VESA(0): Failed to set up write-combining range (0xd0700000,0xd0000)
(WW) VESA(0): Failed to set up write-combining range (0xd0600000,0x1d0000)
(WW) VESA(0): Failed to set up write-combining range (0xd0400000,0x3d0000)
(WW) VESA(0): Failed to set up write-combining range (0xd0000000,0x7d0000)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
waiting for X server to shut down FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount i
s 2, should be 1; fixing.
grep EE /var/log/Xorg.0.log returns no error line, while the only warnings are those reported above...
I've been tinkering with xorg.conf for a couple of days without success... I managed to run X on this laptop using Zenwalk and Knopppix distros with same xorg.conf options (excepted for paths) therefore I would say my xorg.conf is OK. I cannot find out what I mlss...

The upgrade to Gnome 3.6 and systemd has been very annoying.... But the benefits of systemd will outweigh our initial struggles once our bugs are fixed... Especially for those of us with multi-core processors.
Last edited by amadar (2012-11-03 17:50:40)

IPhoto does not start but gives an error message

As soon as I start the iPhoto this messages shows up:
I actually do not know what I did wrong previously with iPhoto. Any help appreciated
Ueli

Sorry, that the error message did not show up. I copied the error message from a screenshot (cmd-shift-4) into my post but now only a question mark can be seen. Sorry.
I am now at a different computer. But the error message said that the iTunes Library is locked or on a locked drive and at hitting the ok button the error message and iTunes closes.
I checked already the harddrive (get info window) regarding that there is a permission missing. But that was ok. The user was allowed to read and write.
I checked the iPhoto Library (get info window) trying to find there a missing permission but everything was ok.
I really do not know that cause.
Ueli

Com.apple.wikid does not start. Generates 4000 error lines per 10 minutes

As of recently, without an up to now identifiable reason, wikid is failing to start. In system.log I see thousands of loglines per every few minutes, but I can't find what the real cause of the issue is or how to solve it. Does anybody have any idea?
The loglines I get every 8 seconds are:
1/27/12 9:04:21 PM     com.apple.wikid[35954]     /System/Library/Frameworks/Python.framework/V ersions/2.6/Extras/lib/python/zope/__init__.py:1: UserWarning: Module twisted was already imported from /usr/share/caldavd/lib/python/twisted/__init__.py, but /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python is being added to sys.path
1/27/12 9:04:21 PM     com.apple.wikid[35954]       __import__('pkg_resources').declare_namespace(__name__)
1/27/12 9:04:21 PM     com.apple.wikid[35954]     Traceback (most recent call last):
1/27/12 9:04:21 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 669, in parseOptions
1/27/12 9:04:21 PM     com.apple.wikid[35954]         usage.Options.parseOptions(self, options)
1/27/12 9:04:21 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/python/usage.py", line 226, in parseOptions
1/27/12 9:04:21 PM     com.apple.wikid[35954]         for (cmd, short, parser, doc) in self.subCommands:
1/27/12 9:04:21 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 679, in subCommands
1/27/12 9:04:21 PM     com.apple.wikid[35954]         for plug in plugins:
1/27/12 9:04:21 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/plugin.py", line 200, in getPlugins
1/27/12 9:04:21 PM     com.apple.wikid[35954]         allDropins = getCache(package)
1/27/12 9:04:21 PM     com.apple.wikid[35954]     --- <exception caught here> ---
1/27/12 9:04:21 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/plugin.py", line 179, in getCache
1/27/12 9:04:21 PM     com.apple.wikid[35954]         dropinPath.setContent(pickle.dumps(dropinDotCache))
1/27/12 9:04:21 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/python/filepath.py", line 640, in setContent
1/27/12 9:04:21 PM     com.apple.wikid[35954]         f = sib.open('w')
1/27/12 9:04:21 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/python/filepath.py", line 450, in open
1/27/12 9:04:21 PM     com.apple.wikid[35954]         return open(self.path, mode+'b')
1/27/12 9:04:21 PM     com.apple.wikid[35954]     exceptions.IOError: [Errno 13] Permission denied: '/usr/share/caldavd/lib/python/twisted/plugins/dropin.cache.new'
1/27/12 9:04:22 PM     com.apple.wikid[35954]     /usr/share/caldavd/lib/python/twisted/mail/sm tp.py:10: DeprecationWarning: the MimeWriter module is deprecated; use the email package instead
1/27/12 9:04:22 PM     com.apple.wikid[35954]       import MimeWriter, tempfile, rfc822
1/27/12 9:04:22 PM     com.apple.wikid[35954]     /usr/share/caldavd/lib/python/calendarserver/ tap/caldav.py:49: DeprecationWarning: mktap and related support modules are deprecated as of Twisted 8.0. Use Twisted Application Plugins with the 'twistd' command directly, as described in 'Writing a Twisted Application Plugin for twistd' chapter of the Developer Guide.
1/27/12 9:04:22 PM     com.apple.wikid[35954]       from twisted.scripts.mktap import getid
1/27/12 9:04:22 PM     com.apple.wikid[35954]     /usr/share/wikid/lib/python/twisted_overrides /microdom.py:176: SyntaxWarning: assertion is always true, perhaps remove parentheses?
1/27/12 9:04:22 PM     com.apple.wikid[35954]       assert (oldChild.parentNode is self,
1/27/12 9:04:23 PM     com.apple.wikid[35954]     Traceback (most recent call last):
1/27/12 9:04:23 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/bin/twistd", line 19, in <module>
1/27/12 9:04:23 PM     com.apple.wikid[35954]         run()
1/27/12 9:04:23 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/scripts/twistd.py", line 27, in run
1/27/12 9:04:23 PM     com.apple.wikid[35954]         app.run(runApp, ServerOptions)
1/27/12 9:04:23 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 694, in run
1/27/12 9:04:23 PM     com.apple.wikid[35954]         runApp(config)
1/27/12 9:04:23 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/scripts/twistd.py", line 23, in runApp
1/27/12 9:04:23 PM     com.apple.wikid[35954]         _SomeApplicationRunner(config).run()
1/27/12 9:04:23 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 423, in run
1/27/12 9:04:23 PM     com.apple.wikid[35954]         self.logger.start(None)
1/27/12 9:04:23 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 251, in start
1/27/12 9:04:23 PM     com.apple.wikid[35954]         observer = self._getLogObserver()
1/27/12 9:04:23 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/scripts/_twistd_unix.py", line 140, in _getLogObserver
1/27/12 9:04:23 PM     com.apple.wikid[35954]         logFile = logfile.LogFile.fromFullPath(self._logfilename)
1/27/12 9:04:23 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/python/logfile.py", line 47, in fromFullPath
1/27/12 9:04:23 PM     com.apple.wikid[35954]         os.path.dirname(logPath), *args, **kwargs)
1/27/12 9:04:23 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/python/logfile.py", line 147, in __init__
1/27/12 9:04:23 PM     com.apple.wikid[35954]         BaseLogFile.__init__(self, name, directory, defaultMode)
1/27/12 9:04:23 PM     com.apple.wikid[35954]       File "/usr/share/caldavd/lib/python/twisted/python/logfile.py", line 32, in __init__
1/27/12 9:04:23 PM     com.apple.wikid[35954]         assert os.path.isdir(self.directory)
1/27/12 9:04:23 PM     com.apple.wikid[35954]     AssertionError
1/27/12 9:04:23 PM     com.apple.launchd[1]     (com.apple.wikid[35954]) Exited with exit code: 1
1/27/12 9:04:23 PM     com.apple.launchd[1]     (com.apple.wikid) Throttling respawn: Will start in 8 seconds
Curious thing is that in /System/Library/LaunchDaemons/com.apple.wikid.plist I see:
<plist version="1.0">
<dict>
        <key>Disabled</key>
        <true/>
</dict>
</plist>
Which I interpret as 'wikid is disabled', but then how come it's trying to start....

Hey Everyone - a quick update. A very helpful friend gave me a hand figuring this out turns out the wikid process was failing because of a blog plist file. Replacing the metadata.plist files for all the users (whom had blogs in the collab data store) along with all the metadata.plist files for the groups as well got the service back up and running. When I say replace, I mean we renamed them all metadataplist.old and the system rebuilt the files and then loaded up without crashing.
I'll try and better document this whole issue (with more research into the cause) and update this for anyone facing this in the future.

11g node manager reachable but server does not start from admin console

I have a issue with node manager is reachable from admin console and from command prompt it is not connected and could not able to start the managed server.
If i change /config/nodemanager/nm_password.properties plain text and restart it is not reachable in admin console abut can connect from command prompt. I could not able to start the even with this scenario.
i see below error when try to check machine monitor tab.
<Error> <NodeManager> <BEA-300033> <Could not execute command "getVersion" on the node manager. Reason: "Access to domain 'dom_11gint' for user 'Ckr10ycOJN' denied".>
Ckr10ycOJN username in config.xml
node manager and managed servers are not root user process.
Please help me if have any suggestions.

Pls. make sure the following points in your environment.
1) Check '*nodemanager.domains*' file in <<WL_HOME>>\commo\nodemanager directory
     a) This file should have the entry for your domain 'dom_11gint'.
     b) Ensure the path referred in the nodemanager.domains file is correct one.
2) Ensure the following remote server startup parameters are passed properly.
     a) In the Admin Console, Navigate Servers --> <<SERVER_NAME>> -->Configuration --> Server Start
     b) Pass the required Class Path, Arguments, User Name, Password(User name and Password to boot the managed servers)

IPod touch music does not start songs from the beginning

the songs on an ipod touch does not start from the beginning how do you fix this

In your iTunes Library, check the songs to see if they are set to Remember playback position. If they are, turn that off and Sync the iPod with iTunes for these new changes to take effect.
Highlight a song, right-click/Get Info/Options>Remember playback position:

Photoshop cc 64 bits does not start anymore

Since yesterday my photoshop CC 64 bits does not start aymore with an error message like "the internal file signature is incorrect." (it is a translation I use the French version).
My photoshop cc 32 bits works still fine.
I have the version 14.1.1 of Photoshop that has been installed a few days ago automatically by Adobe Updater.
Since that day I had not used Photoshop so I guess it is this update that has corrupted something.
I am a new user of photoshop on a fresh new Windows 8 PC and I have not yet installed any additional plugin to it.

That sounds like the installation has been corrupted on disk.
Uninstalling the app, reinstalling, and re-updating is your best bet.

ITunes10 does not start from Data-Disk(error 13001)!

Similar Messages

Maybe you are looking for